update telemetry proto

src/protos/meshtastic/telemetry.proto

@@ -15,27 +15,27 @@ message DeviceMetrics {
   /*
    * 0-100 (>100 means powered)
    */
-  uint32 battery_level = 1;
+  optional uint32 battery_level = 1;
 
   /*
    * Voltage measured
    */
-  float voltage = 2;
+  optional float voltage = 2;
 
   /*
    * Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise).
    */
-  float channel_utilization = 3;
+  optional float channel_utilization = 3;
 
   /*
    * Percent of airtime for transmission used within the last hour.
    */
-  float air_util_tx = 4;
+  optional float air_util_tx = 4;
 
   /*
    * How long the device has been running since the last reboot (in seconds)
    */
-  uint32 uptime_seconds = 5;
+  optional uint32 uptime_seconds = 5;
 }
 
 /*
@@ -45,38 +45,95 @@ message EnvironmentMetrics {
   /*
    * Temperature measured
    */
-  float temperature = 1;
+  optional float temperature = 1;
 
   /*
    * Relative humidity percent measured
    */
-  float relative_humidity = 2;
+  optional float relative_humidity = 2;
 
   /*
    * Barometric pressure in hPA measured
    */
-  float barometric_pressure = 3;
+  optional float barometric_pressure = 3;
 
   /*
    * Gas resistance in MOhm measured
    */
-  float gas_resistance = 4;
+  optional float gas_resistance = 4;
 
   /*
    * Voltage measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x)
    */
-  float voltage = 5;
+  optional float voltage = 5;
 
   /*
    * Current measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x)
    */
-  float current = 6;
+  optional float current = 6;
 
   /*
    * relative scale IAQ value as measured by Bosch BME680 . value 0-500.
    * Belongs to Air Quality but is not particle but VOC measurement. Other VOC values can also be put in here.
    */
-  uint32 iaq = 7;
+  optional uint32 iaq = 7;
+
+  /*
+   * RCWL9620 Doppler Radar Distance Sensor, used for water level detection. Float value in mm.
+   */
+  optional float distance = 8;
+
+  /*
+   * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor.
+   */
+  optional float lux = 9;
+
+  /*
+   * VEML7700 high accuracy white light(irradiance) not calibrated digital 16-bit resolution sensor.
+   */
+  optional float white_lux = 10;
+
+  /*
+   * Infrared lux
+   */
+  optional float ir_lux = 11;
+
+  /*
+   * Ultraviolet lux
+   */
+  optional float uv_lux = 12;
+
+  /*
+   * Wind direction in degrees
+   * 0 degrees = North, 90 = East, etc...
+   */
+  optional uint32 wind_direction = 13;
+
+  /*
+   * Wind speed in m/s
+   */
+  optional float wind_speed = 14;
+
+  /*
+   * Weight in KG
+   */
+  optional float weight = 15;
+
+  /*
+   * Wind gust in m/s
+   */
+  optional float wind_gust = 16;
+
+  /*
+   * Wind lull in m/s
+   */
+  optional float wind_lull = 17;
+
+  /*
+  * Radiation in µR/h
+  */
+  optional float radiation = 18;
+
 }
 
 /*
@@ -86,32 +143,32 @@ message PowerMetrics {
   /*
    * Voltage (Ch1)
    */
-  float ch1_voltage = 1;
+  optional float ch1_voltage = 1;
 
   /*
    * Current (Ch1)
    */
-  float ch1_current = 2;
+  optional float ch1_current = 2;
 
   /*
    * Voltage (Ch2)
    */
-  float ch2_voltage = 3;
+  optional float ch2_voltage = 3;
 
   /*
    * Current (Ch2)
    */
-  float ch2_current = 4;
+  optional float ch2_current = 4;
 
   /*
    * Voltage (Ch3)
    */
-  float ch3_voltage = 5;
+  optional float ch3_voltage = 5;
 
   /*
    * Current (Ch3)
    */
-  float ch3_current = 6;
+  optional float ch3_current = 6;
 }
 
 /*
@@ -121,62 +178,147 @@ message AirQualityMetrics {
   /*
    * Concentration Units Standard PM1.0
    */
-  uint32 pm10_standard = 1;
+  optional uint32 pm10_standard = 1;
 
   /*
    * Concentration Units Standard PM2.5
    */
-  uint32 pm25_standard = 2;
+  optional uint32 pm25_standard = 2;
 
   /*
    * Concentration Units Standard PM10.0
    */
-  uint32 pm100_standard = 3;
+  optional uint32 pm100_standard = 3;
 
   /*
    * Concentration Units Environmental PM1.0
    */
-  uint32 pm10_environmental = 4;
+  optional uint32 pm10_environmental = 4;
 
   /*
    * Concentration Units Environmental PM2.5
    */
-  uint32 pm25_environmental = 5;
+  optional uint32 pm25_environmental = 5;
 
   /*
    * Concentration Units Environmental PM10.0
    */
-  uint32 pm100_environmental = 6;
+  optional uint32 pm100_environmental = 6;
 
   /*
    * 0.3um Particle Count
    */
-  uint32 particles_03um = 7;
+  optional uint32 particles_03um = 7;
 
   /*
    * 0.5um Particle Count
    */
-  uint32 particles_05um = 8;
+  optional uint32 particles_05um = 8;
 
   /*
    * 1.0um Particle Count
    */
-  uint32 particles_10um = 9;
+  optional uint32 particles_10um = 9;
 
   /*
    * 2.5um Particle Count
    */
-  uint32 particles_25um = 10;
+  optional uint32 particles_25um = 10;
 
   /*
    * 5.0um Particle Count
    */
-  uint32 particles_50um = 11;
+  optional uint32 particles_50um = 11;
 
   /*
    * 10.0um Particle Count
    */
-  uint32 particles_100um = 12;
+  optional uint32 particles_100um = 12;
+
+  /*
+   * 10.0um Particle Count
+   */
+  optional uint32 co2 = 13;
+}
+
+/*
+ * Local device mesh statistics
+ */
+message LocalStats {
+  /*
+   * How long the device has been running since the last reboot (in seconds)
+   */
+  uint32 uptime_seconds = 1;
+  /*
+   * Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise).
+   */
+  float channel_utilization = 2;
+  /*
+   * Percent of airtime for transmission used within the last hour.
+   */
+  float air_util_tx = 3;
+
+  /*
+   * Number of packets sent
+   */
+  uint32 num_packets_tx = 4;
+
+  /*
+   * Number of packets received (both good and bad)
+   */
+  uint32 num_packets_rx = 5;
+
+  /*
+   * Number of packets received that are malformed or violate the protocol
+   */
+  uint32 num_packets_rx_bad = 6;
+
+  /*
+   * Number of nodes online (in the past 2 hours)
+   */
+  uint32 num_online_nodes = 7;
+
+  /*
+   * Number of nodes total
+   */
+  uint32 num_total_nodes = 8;
+
+  /*
+   * Number of received packets that were duplicates (due to multiple nodes relaying).
+   * If this number is high, there are nodes in the mesh relaying packets when it's unnecessary, for example due to the ROUTER/REPEATER role.
+   */
+  uint32 num_rx_dupe = 9;
+
+  /*
+   * Number of packets we transmitted that were a relay for others (not originating from ourselves).
+   */
+  uint32 num_tx_relay = 10;
+
+  /*
+   * Number of times we canceled a packet to be relayed, because someone else did it before us.
+   * This will always be zero for ROUTERs/REPEATERs. If this number is high, some other node(s) is/are relaying faster than you.
+   */
+  uint32 num_tx_relay_canceled = 11;
+}
+
+/*
+ * Health telemetry metrics
+ */
+message HealthMetrics {
+  /*
+   * Heart rate (beats per minute)
+   */
+  optional uint32 heart_bpm = 1;
+
+  /*
+   * SpO2 (blood oxygen saturation) level
+   */
+  optional uint32 spO2 = 2;
+
+  /*
+   * Body temperature in degrees Celsius
+   */
+  optional float temperature = 3;
 }
 
 /*
@@ -208,6 +350,16 @@ message Telemetry {
      * Power Metrics
      */
     PowerMetrics power_metrics = 5;
+
+    /*
+     * Local device mesh statistics
+     */
+    LocalStats local_stats = 6;
+
+    /*
+     * Health telemetry metrics
+     */
+    HealthMetrics health_metrics = 7;
   }
 }
 
@@ -294,4 +446,115 @@ enum TelemetrySensorType {
    * BMP085/BMP180 High accuracy temperature and pressure (older Version of BMP280)
    */
   BMP085 = 15;
+
+  /*
+   * RCWL-9620 Doppler Radar Distance Sensor, used for water level detection
+   */
+  RCWL9620 = 16;
+
+  /*
+   * Sensirion High accuracy temperature and humidity
+   */
+  SHT4X = 17;
+
+  /*
+   * VEML7700 high accuracy ambient light(Lux) digital 16-bit resolution sensor.
+   */
+  VEML7700 = 18;
+
+  /*
+   * MLX90632 non-contact IR temperature sensor.
+   */
+  MLX90632 = 19;
+
+  /*
+   * TI OPT3001 Ambient Light Sensor
+   */
+  OPT3001 = 20;
+
+  /*
+   * Lite On LTR-390UV-01 UV Light Sensor
+   */
+  LTR390UV = 21;
+
+  /*
+   * AMS TSL25911FN RGB Light Sensor
+   */
+  TSL25911FN = 22;
+
+  /*
+   * AHT10 Integrated temperature and humidity sensor
+   */
+  AHT10 = 23;
+
+  /*
+   * DFRobot Lark Weather station (temperature, humidity, pressure, wind speed and direction)
+   */
+  DFROBOT_LARK = 24;
+
+  /*
+   * NAU7802 Scale Chip or compatible
+   */
+  NAU7802 = 25;
+
+  /*
+   * BMP3XX High accuracy temperature and pressure
+   */
+  BMP3XX = 26;
+
+  /*
+   * ICM-20948 9-Axis digital motion processor
+   */
+  ICM20948 = 27;
+
+  /*
+   * MAX17048 1S lipo battery sensor (voltage, state of charge, time to go)
+   */
+  MAX17048 = 28;
+
+  /*
+   * Custom I2C sensor implementation based on https://github.com/meshtastic/i2c-sensor
+   */
+  CUSTOM_SENSOR = 29;
+
+  /*
+   * MAX30102 Pulse Oximeter and Heart-Rate Sensor
+   */
+  MAX30102 = 30;
+
+  /*
+   * MLX90614 non-contact IR temperature sensor
+   */
+  MLX90614 = 31;
+
+  /*
+   * SCD40/SCD41 CO2, humidity, temperature sensor
+   */
+  SCD4X = 32;
+
+  /*
+   * ClimateGuard RadSens, radiation, Geiger-Muller Tube
+   */
+  RADSENS = 33;
+
+  /*
+   * High accuracy current and voltage
+   */
+  INA226 = 34;
+
+}
+
+/*
+ * NAU7802 Telemetry configuration, for saving to flash
+ */
+message Nau7802Config {
+  /*
+   * The offset setting for the NAU7802
+   */
+  int32 zeroOffset = 1;
+
+  /*
+   * The calibration factor for the NAU7802
+   */
+  float calibrationFactor = 2;
 }