diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..11ddd8d
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,3 @@
+node_modules
+# Keep environment variables out of version control
+.env
diff --git a/package-lock.json b/package-lock.json
index 1cf8ce6..10d83eb 100644
--- a/package-lock.json
+++ b/package-lock.json
@@ -9,9 +9,181 @@
"version": "1.0.0",
"license": "ISC",
"dependencies": {
- "axios": "^1.6.7",
+ "@prisma/client": "^5.11.0",
"express": "^4.18.3",
- "node-cache": "^5.1.2"
+ "mqtt": "^5.3.6",
+ "protobufjs": "^7.2.6"
+ },
+ "devDependencies": {
+ "prisma": "^5.10.2"
+ }
+ },
+ "node_modules/@babel/runtime": {
+ "version": "7.24.0",
+ "resolved": "https://registry.npmjs.org/@babel/runtime/-/runtime-7.24.0.tgz",
+ "integrity": "sha512-Chk32uHMg6TnQdvw2e9IlqPpFX/6NLuK0Ys2PqLb7/gL5uFn9mXvK715FGLlOLQrcO4qIkNHkvPGktzzXexsFw==",
+ "dependencies": {
+ "regenerator-runtime": "^0.14.0"
+ },
+ "engines": {
+ "node": ">=6.9.0"
+ }
+ },
+ "node_modules/@prisma/client": {
+ "version": "5.11.0",
+ "resolved": "https://registry.npmjs.org/@prisma/client/-/client-5.11.0.tgz",
+ "integrity": "sha512-SWshvS5FDXvgJKM/a0y9nDC1rqd7KG0Q6ZVzd+U7ZXK5soe73DJxJJgbNBt2GNXOa+ysWB4suTpdK5zfFPhwiw==",
+ "hasInstallScript": true,
+ "engines": {
+ "node": ">=16.13"
+ },
+ "peerDependencies": {
+ "prisma": "*"
+ },
+ "peerDependenciesMeta": {
+ "prisma": {
+ "optional": true
+ }
+ }
+ },
+ "node_modules/@prisma/debug": {
+ "version": "5.10.2",
+ "resolved": "https://registry.npmjs.org/@prisma/debug/-/debug-5.10.2.tgz",
+ "integrity": "sha512-bkBOmH9dpEBbMKFJj8V+Zp8IZHIBjy3fSyhLhxj4FmKGb/UBSt9doyfA6k1UeUREsMJft7xgPYBbHSOYBr8XCA==",
+ "devOptional": true
+ },
+ "node_modules/@prisma/engines": {
+ "version": "5.10.2",
+ "resolved": "https://registry.npmjs.org/@prisma/engines/-/engines-5.10.2.tgz",
+ "integrity": "sha512-HkSJvix6PW8YqEEt3zHfCYYJY69CXsNdhU+wna+4Y7EZ+AwzeupMnUThmvaDA7uqswiHkgm5/SZ6/4CStjaGmw==",
+ "devOptional": true,
+ "hasInstallScript": true,
+ "dependencies": {
+ "@prisma/debug": "5.10.2",
+ "@prisma/engines-version": "5.10.0-34.5a9203d0590c951969e85a7d07215503f4672eb9",
+ "@prisma/fetch-engine": "5.10.2",
+ "@prisma/get-platform": "5.10.2"
+ }
+ },
+ "node_modules/@prisma/engines-version": {
+ "version": "5.10.0-34.5a9203d0590c951969e85a7d07215503f4672eb9",
+ "resolved": "https://registry.npmjs.org/@prisma/engines-version/-/engines-version-5.10.0-34.5a9203d0590c951969e85a7d07215503f4672eb9.tgz",
+ "integrity": "sha512-uCy/++3Jx/O3ufM+qv2H1L4tOemTNqcP/gyEVOlZqTpBvYJUe0tWtW0y3o2Ueq04mll4aM5X3f6ugQftOSLdFQ==",
+ "devOptional": true
+ },
+ "node_modules/@prisma/fetch-engine": {
+ "version": "5.10.2",
+ "resolved": "https://registry.npmjs.org/@prisma/fetch-engine/-/fetch-engine-5.10.2.tgz",
+ "integrity": "sha512-dSmXcqSt6DpTmMaLQ9K8ZKzVAMH3qwGCmYEZr/uVnzVhxRJ1EbT/w2MMwIdBNq1zT69Rvh0h75WMIi0mrIw7Hg==",
+ "devOptional": true,
+ "dependencies": {
+ "@prisma/debug": "5.10.2",
+ "@prisma/engines-version": "5.10.0-34.5a9203d0590c951969e85a7d07215503f4672eb9",
+ "@prisma/get-platform": "5.10.2"
+ }
+ },
+ "node_modules/@prisma/get-platform": {
+ "version": "5.10.2",
+ "resolved": "https://registry.npmjs.org/@prisma/get-platform/-/get-platform-5.10.2.tgz",
+ "integrity": "sha512-nqXP6vHiY2PIsebBAuDeWiUYg8h8mfjBckHh6Jezuwej0QJNnjDiOq30uesmg+JXxGk99nqyG3B7wpcOODzXvg==",
+ "devOptional": true,
+ "dependencies": {
+ "@prisma/debug": "5.10.2"
+ }
+ },
+ "node_modules/@protobufjs/aspromise": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/@protobufjs/aspromise/-/aspromise-1.1.2.tgz",
+ "integrity": "sha512-j+gKExEuLmKwvz3OgROXtrJ2UG2x8Ch2YZUxahh+s1F2HZ+wAceUNLkvy6zKCPVRkU++ZWQrdxsUeQXmcg4uoQ=="
+ },
+ "node_modules/@protobufjs/base64": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/@protobufjs/base64/-/base64-1.1.2.tgz",
+ "integrity": "sha512-AZkcAA5vnN/v4PDqKyMR5lx7hZttPDgClv83E//FMNhR2TMcLUhfRUBHCmSl0oi9zMgDDqRUJkSxO3wm85+XLg=="
+ },
+ "node_modules/@protobufjs/codegen": {
+ "version": "2.0.4",
+ "resolved": "https://registry.npmjs.org/@protobufjs/codegen/-/codegen-2.0.4.tgz",
+ "integrity": "sha512-YyFaikqM5sH0ziFZCN3xDC7zeGaB/d0IUb9CATugHWbd1FRFwWwt4ld4OYMPWu5a3Xe01mGAULCdqhMlPl29Jg=="
+ },
+ "node_modules/@protobufjs/eventemitter": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/@protobufjs/eventemitter/-/eventemitter-1.1.0.tgz",
+ "integrity": "sha512-j9ednRT81vYJ9OfVuXG6ERSTdEL1xVsNgqpkxMsbIabzSo3goCjDIveeGv5d03om39ML71RdmrGNjG5SReBP/Q=="
+ },
+ "node_modules/@protobufjs/fetch": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/@protobufjs/fetch/-/fetch-1.1.0.tgz",
+ "integrity": "sha512-lljVXpqXebpsijW71PZaCYeIcE5on1w5DlQy5WH6GLbFryLUrBD4932W/E2BSpfRJWseIL4v/KPgBFxDOIdKpQ==",
+ "dependencies": {
+ "@protobufjs/aspromise": "^1.1.1",
+ "@protobufjs/inquire": "^1.1.0"
+ }
+ },
+ "node_modules/@protobufjs/float": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/@protobufjs/float/-/float-1.0.2.tgz",
+ "integrity": "sha512-Ddb+kVXlXst9d+R9PfTIxh1EdNkgoRe5tOX6t01f1lYWOvJnSPDBlG241QLzcyPdoNTsblLUdujGSE4RzrTZGQ=="
+ },
+ "node_modules/@protobufjs/inquire": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/@protobufjs/inquire/-/inquire-1.1.0.tgz",
+ "integrity": "sha512-kdSefcPdruJiFMVSbn801t4vFK7KB/5gd2fYvrxhuJYg8ILrmn9SKSX2tZdV6V+ksulWqS7aXjBcRXl3wHoD9Q=="
+ },
+ "node_modules/@protobufjs/path": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/@protobufjs/path/-/path-1.1.2.tgz",
+ "integrity": "sha512-6JOcJ5Tm08dOHAbdR3GrvP+yUUfkjG5ePsHYczMFLq3ZmMkAD98cDgcT2iA1lJ9NVwFd4tH/iSSoe44YWkltEA=="
+ },
+ "node_modules/@protobufjs/pool": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/@protobufjs/pool/-/pool-1.1.0.tgz",
+ "integrity": "sha512-0kELaGSIDBKvcgS4zkjz1PeddatrjYcmMWOlAuAPwAeccUrPHdUqo/J6LiymHHEiJT5NrF1UVwxY14f+fy4WQw=="
+ },
+ "node_modules/@protobufjs/utf8": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/@protobufjs/utf8/-/utf8-1.1.0.tgz",
+ "integrity": "sha512-Vvn3zZrhQZkkBE8LSuW3em98c0FwgO4nxzv6OdSxPKJIEKY2bGbHn+mhGIPerzI4twdxaP8/0+06HBpwf345Lw=="
+ },
+ "node_modules/@types/node": {
+ "version": "20.11.26",
+ "resolved": "https://registry.npmjs.org/@types/node/-/node-20.11.26.tgz",
+ "integrity": "sha512-YwOMmyhNnAWijOBQweOJnQPl068Oqd4K3OFbTc6AHJwzweUwwWG3GIFY74OKks2PJUDkQPeddOQES9mLn1CTEQ==",
+ "dependencies": {
+ "undici-types": "~5.26.4"
+ }
+ },
+ "node_modules/@types/readable-stream": {
+ "version": "4.0.10",
+ "resolved": "https://registry.npmjs.org/@types/readable-stream/-/readable-stream-4.0.10.tgz",
+ "integrity": "sha512-AbUKBjcC8SHmImNi4yK2bbjogQlkFSg7shZCcicxPQapniOlajG8GCc39lvXzCWX4lLRRs7DM3VAeSlqmEVZUA==",
+ "dependencies": {
+ "@types/node": "*",
+ "safe-buffer": "~5.1.1"
+ }
+ },
+ "node_modules/@types/readable-stream/node_modules/safe-buffer": {
+ "version": "5.1.2",
+ "resolved": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.2.tgz",
+ "integrity": "sha512-Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g=="
+ },
+ "node_modules/@types/ws": {
+ "version": "8.5.10",
+ "resolved": "https://registry.npmjs.org/@types/ws/-/ws-8.5.10.tgz",
+ "integrity": "sha512-vmQSUcfalpIq0R9q7uTo2lXs6eGIpt9wtnLdMv9LVpIjCA/+ufZRozlVoVelIYixx1ugCBKDhn89vnsEGOCx9A==",
+ "dependencies": {
+ "@types/node": "*"
+ }
+ },
+ "node_modules/abort-controller": {
+ "version": "3.0.0",
+ "resolved": "https://registry.npmjs.org/abort-controller/-/abort-controller-3.0.0.tgz",
+ "integrity": "sha512-h8lQ8tacZYnR3vNQTgibj+tODHI5/+l06Au2Pcriv/Gmet0eaj4TwWH41sO9wnHDiQsEj19q0drzdWdeAHtweg==",
+ "dependencies": {
+ "event-target-shim": "^5.0.0"
+ },
+ "engines": {
+ "node": ">=6.5"
}
},
"node_modules/accepts": {
@@ -31,19 +203,34 @@
"resolved": "https://registry.npmjs.org/array-flatten/-/array-flatten-1.1.1.tgz",
"integrity": "sha512-PCVAQswWemu6UdxsDFFX/+gVeYqKAod3D3UVm91jHwynguOwAvYPhx8nNlM++NqRcK6CxxpUafjmhIdKiHibqg=="
},
- "node_modules/asynckit": {
- "version": "0.4.0",
- "resolved": "https://registry.npmjs.org/asynckit/-/asynckit-0.4.0.tgz",
- "integrity": "sha512-Oei9OH4tRh0YqU3GxhX79dM/mwVgvbZJaSNaRk+bshkj0S5cfHcgYakreBjrHwatXKbz+IoIdYLxrKim2MjW0Q=="
+ "node_modules/base64-js": {
+ "version": "1.5.1",
+ "resolved": "https://registry.npmjs.org/base64-js/-/base64-js-1.5.1.tgz",
+ "integrity": "sha512-AKpaYlHn8t4SVbOHCy+b5+KKgvR4vrsD8vbvrbiQJps7fKDTkjkDry6ji0rUJjC0kzbNePLwzxq8iypo41qeWA==",
+ "funding": [
+ {
+ "type": "github",
+ "url": "https://github.com/sponsors/feross"
+ },
+ {
+ "type": "patreon",
+ "url": "https://www.patreon.com/feross"
+ },
+ {
+ "type": "consulting",
+ "url": "https://feross.org/support"
+ }
+ ]
},
- "node_modules/axios": {
- "version": "1.6.7",
- "resolved": "https://registry.npmjs.org/axios/-/axios-1.6.7.tgz",
- "integrity": "sha512-/hDJGff6/c7u0hDkvkGxR/oy6CbCs8ziCsC7SqmhjfozqiJGc8Z11wrv9z9lYfY4K8l+H9TpjcMDX0xOZmx+RA==",
+ "node_modules/bl": {
+ "version": "6.0.12",
+ "resolved": "https://registry.npmjs.org/bl/-/bl-6.0.12.tgz",
+ "integrity": "sha512-EnEYHilP93oaOa2MnmNEjAcovPS3JlQZOyzGXi3EyEpPhm9qWvdDp7BmAVEVusGzp8LlwQK56Av+OkDoRjzE0w==",
"dependencies": {
- "follow-redirects": "^1.15.4",
- "form-data": "^4.0.0",
- "proxy-from-env": "^1.1.0"
+ "@types/readable-stream": "^4.0.0",
+ "buffer": "^6.0.3",
+ "inherits": "^2.0.4",
+ "readable-stream": "^4.2.0"
}
},
"node_modules/body-parser": {
@@ -69,6 +256,34 @@
"npm": "1.2.8000 || >= 1.4.16"
}
},
+ "node_modules/buffer": {
+ "version": "6.0.3",
+ "resolved": "https://registry.npmjs.org/buffer/-/buffer-6.0.3.tgz",
+ "integrity": "sha512-FTiCpNxtwiZZHEZbcbTIcZjERVICn9yq/pDFkTl95/AxzD1naBctN7YO68riM/gLSDY7sdrMby8hofADYuuqOA==",
+ "funding": [
+ {
+ "type": "github",
+ "url": "https://github.com/sponsors/feross"
+ },
+ {
+ "type": "patreon",
+ "url": "https://www.patreon.com/feross"
+ },
+ {
+ "type": "consulting",
+ "url": "https://feross.org/support"
+ }
+ ],
+ "dependencies": {
+ "base64-js": "^1.3.1",
+ "ieee754": "^1.2.1"
+ }
+ },
+ "node_modules/buffer-from": {
+ "version": "1.1.2",
+ "resolved": "https://registry.npmjs.org/buffer-from/-/buffer-from-1.1.2.tgz",
+ "integrity": "sha512-E+XQCRwSbaaiChtv6k6Dwgc+bx+Bs6vuKJHHl5kox/BaKbhiXzqQOwK4cO22yElGp2OCmjwVhT3HmxgyPGnJfQ=="
+ },
"node_modules/bytes": {
"version": "3.1.2",
"resolved": "https://registry.npmjs.org/bytes/-/bytes-3.1.2.tgz",
@@ -95,23 +310,36 @@
"url": "https://github.com/sponsors/ljharb"
}
},
- "node_modules/clone": {
- "version": "2.1.2",
- "resolved": "https://registry.npmjs.org/clone/-/clone-2.1.2.tgz",
- "integrity": "sha512-3Pe/CF1Nn94hyhIYpjtiLhdCoEoz0DqQ+988E9gmeEdQZlojxnOb74wctFyuwWQHzqyf9X7C7MG8juUpqBJT8w==",
- "engines": {
- "node": ">=0.8"
+ "node_modules/commist": {
+ "version": "3.2.0",
+ "resolved": "https://registry.npmjs.org/commist/-/commist-3.2.0.tgz",
+ "integrity": "sha512-4PIMoPniho+LqXmpS5d3NuGYncG6XWlkBSVGiWycL22dd42OYdUGil2CWuzklaJoNxyxUSpO4MKIBU94viWNAw=="
+ },
+ "node_modules/concat-stream": {
+ "version": "2.0.0",
+ "resolved": "https://registry.npmjs.org/concat-stream/-/concat-stream-2.0.0.tgz",
+ "integrity": "sha512-MWufYdFw53ccGjCA+Ol7XJYpAlW6/prSMzuPOTRnJGcGzuhLn4Scrz7qf6o8bROZ514ltazcIFJZevcfbo0x7A==",
+ "engines": [
+ "node >= 6.0"
+ ],
+ "dependencies": {
+ "buffer-from": "^1.0.0",
+ "inherits": "^2.0.3",
+ "readable-stream": "^3.0.2",
+ "typedarray": "^0.0.6"
}
},
- "node_modules/combined-stream": {
- "version": "1.0.8",
- "resolved": "https://registry.npmjs.org/combined-stream/-/combined-stream-1.0.8.tgz",
- "integrity": "sha512-FQN4MRfuJeHf7cBbBMJFXhKSDq+2kAArBlmRBvcvFE5BB1HZKXtSFASDhdlz9zOYwxh8lDdnvmMOe/+5cdoEdg==",
+ "node_modules/concat-stream/node_modules/readable-stream": {
+ "version": "3.6.2",
+ "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-3.6.2.tgz",
+ "integrity": "sha512-9u/sniCrY3D5WdsERHzHE4G2YCXqoG5FTHUiCC4SIbr6XcLZBY05ya9EKjYek9O5xOAwjGq+1JdGBAS7Q9ScoA==",
"dependencies": {
- "delayed-stream": "~1.0.0"
+ "inherits": "^2.0.3",
+ "string_decoder": "^1.1.1",
+ "util-deprecate": "^1.0.1"
},
"engines": {
- "node": ">= 0.8"
+ "node": ">= 6"
}
},
"node_modules/content-disposition": {
@@ -170,14 +398,6 @@
"url": "https://github.com/sponsors/ljharb"
}
},
- "node_modules/delayed-stream": {
- "version": "1.0.0",
- "resolved": "https://registry.npmjs.org/delayed-stream/-/delayed-stream-1.0.0.tgz",
- "integrity": "sha512-ZySD7Nf91aLB0RxL4KGrKHBXl7Eds1DAmEdcoVawXnLD7SDhpNgtuII2aAkg7a7QS41jxPSZ17p4VdGnMHk3MQ==",
- "engines": {
- "node": ">=0.4.0"
- }
- },
"node_modules/depd": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/depd/-/depd-2.0.0.tgz",
@@ -240,6 +460,22 @@
"node": ">= 0.6"
}
},
+ "node_modules/event-target-shim": {
+ "version": "5.0.1",
+ "resolved": "https://registry.npmjs.org/event-target-shim/-/event-target-shim-5.0.1.tgz",
+ "integrity": "sha512-i/2XbnSz/uxRCU6+NdVJgKWDTM427+MqYbkQzD321DuCQJUqOuJKIA0IM2+W2xtYHdKOmZ4dR6fExsd4SXL+WQ==",
+ "engines": {
+ "node": ">=6"
+ }
+ },
+ "node_modules/events": {
+ "version": "3.3.0",
+ "resolved": "https://registry.npmjs.org/events/-/events-3.3.0.tgz",
+ "integrity": "sha512-mQw+2fkQbALzQ7V0MY0IqdnXNOeTtP4r0lN9z7AAawCXgqea7bDii20AYrIBrFd/Hx0M2Ocz6S111CaFkUcb0Q==",
+ "engines": {
+ "node": ">=0.8.x"
+ }
+ },
"node_modules/express": {
"version": "4.18.3",
"resolved": "https://registry.npmjs.org/express/-/express-4.18.3.tgz",
@@ -281,6 +517,18 @@
"node": ">= 0.10.0"
}
},
+ "node_modules/fast-unique-numbers": {
+ "version": "8.0.13",
+ "resolved": "https://registry.npmjs.org/fast-unique-numbers/-/fast-unique-numbers-8.0.13.tgz",
+ "integrity": "sha512-7OnTFAVPefgw2eBJ1xj2PGGR9FwYzSUso9decayHgCDX4sJkHLdcsYTytTg+tYv+wKF3U8gJuSBz2jJpQV4u/g==",
+ "dependencies": {
+ "@babel/runtime": "^7.23.8",
+ "tslib": "^2.6.2"
+ },
+ "engines": {
+ "node": ">=16.1.0"
+ }
+ },
"node_modules/finalhandler": {
"version": "1.2.0",
"resolved": "https://registry.npmjs.org/finalhandler/-/finalhandler-1.2.0.tgz",
@@ -298,38 +546,6 @@
"node": ">= 0.8"
}
},
- "node_modules/follow-redirects": {
- "version": "1.15.5",
- "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.15.5.tgz",
- "integrity": "sha512-vSFWUON1B+yAw1VN4xMfxgn5fTUiaOzAJCKBwIIgT/+7CuGy9+r+5gITvP62j3RmaD5Ph65UaERdOSRGUzZtgw==",
- "funding": [
- {
- "type": "individual",
- "url": "https://github.com/sponsors/RubenVerborgh"
- }
- ],
- "engines": {
- "node": ">=4.0"
- },
- "peerDependenciesMeta": {
- "debug": {
- "optional": true
- }
- }
- },
- "node_modules/form-data": {
- "version": "4.0.0",
- "resolved": "https://registry.npmjs.org/form-data/-/form-data-4.0.0.tgz",
- "integrity": "sha512-ETEklSGi5t0QMZuiXoA/Q6vcnxcLQP5vdugSpuAyi6SVGi2clPPp+xgEhuMaHC+zGgn31Kd235W35f7Hykkaww==",
- "dependencies": {
- "asynckit": "^0.4.0",
- "combined-stream": "^1.0.8",
- "mime-types": "^2.1.12"
- },
- "engines": {
- "node": ">= 6"
- }
- },
"node_modules/forwarded": {
"version": "0.2.0",
"resolved": "https://registry.npmjs.org/forwarded/-/forwarded-0.2.0.tgz",
@@ -427,6 +643,11 @@
"node": ">= 0.4"
}
},
+ "node_modules/help-me": {
+ "version": "5.0.0",
+ "resolved": "https://registry.npmjs.org/help-me/-/help-me-5.0.0.tgz",
+ "integrity": "sha512-7xgomUX6ADmcYzFik0HzAxh/73YlKR9bmFzf51CZwR+b6YtzU2m0u49hQCqV6SvlqIqsaxovfwdvbnsw3b/zpg=="
+ },
"node_modules/http-errors": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/http-errors/-/http-errors-2.0.0.tgz",
@@ -453,6 +674,25 @@
"node": ">=0.10.0"
}
},
+ "node_modules/ieee754": {
+ "version": "1.2.1",
+ "resolved": "https://registry.npmjs.org/ieee754/-/ieee754-1.2.1.tgz",
+ "integrity": "sha512-dcyqhDvX1C46lXZcVqCpK+FtMRQVdIMN6/Df5js2zouUsqG7I6sFxitIC+7KYK29KdXOLHdu9zL4sFnoVQnqaA==",
+ "funding": [
+ {
+ "type": "github",
+ "url": "https://github.com/sponsors/feross"
+ },
+ {
+ "type": "patreon",
+ "url": "https://www.patreon.com/feross"
+ },
+ {
+ "type": "consulting",
+ "url": "https://feross.org/support"
+ }
+ ]
+ },
"node_modules/inherits": {
"version": "2.0.4",
"resolved": "https://registry.npmjs.org/inherits/-/inherits-2.0.4.tgz",
@@ -466,6 +706,28 @@
"node": ">= 0.10"
}
},
+ "node_modules/js-sdsl": {
+ "version": "4.3.0",
+ "resolved": "https://registry.npmjs.org/js-sdsl/-/js-sdsl-4.3.0.tgz",
+ "integrity": "sha512-mifzlm2+5nZ+lEcLJMoBK0/IH/bDg8XnJfd/Wq6IP+xoCjLZsTOnV2QpxlVbX9bMnkl5PdEjNtBJ9Cj1NjifhQ==",
+ "funding": {
+ "type": "opencollective",
+ "url": "https://opencollective.com/js-sdsl"
+ }
+ },
+ "node_modules/long": {
+ "version": "5.2.3",
+ "resolved": "https://registry.npmjs.org/long/-/long-5.2.3.tgz",
+ "integrity": "sha512-lcHwpNoggQTObv5apGNCTdJrO69eHOZMi4BNC+rTLER8iHAqGrUVeLh/irVIM7zTw2bOXA8T6uNPeujwOLg/2Q=="
+ },
+ "node_modules/lru-cache": {
+ "version": "10.2.0",
+ "resolved": "https://registry.npmjs.org/lru-cache/-/lru-cache-10.2.0.tgz",
+ "integrity": "sha512-2bIM8x+VAf6JT4bKAljS1qUWgMsqZRPGJS6FSahIMPVvctcNhyVp7AJu7quxOW9jwkryBReKZY5tY5JYv2n/7Q==",
+ "engines": {
+ "node": "14 || >=16.14"
+ }
+ },
"node_modules/media-typer": {
"version": "0.3.0",
"resolved": "https://registry.npmjs.org/media-typer/-/media-typer-0.3.0.tgz",
@@ -517,6 +779,98 @@
"node": ">= 0.6"
}
},
+ "node_modules/minimist": {
+ "version": "1.2.8",
+ "resolved": "https://registry.npmjs.org/minimist/-/minimist-1.2.8.tgz",
+ "integrity": "sha512-2yyAR8qBkN3YuheJanUpWC5U3bb5osDywNB8RzDVlDwDHbocAJveqqj1u8+SVD7jkWT4yvsHCpWqqWqAxb0zCA==",
+ "funding": {
+ "url": "https://github.com/sponsors/ljharb"
+ }
+ },
+ "node_modules/mqtt": {
+ "version": "5.3.6",
+ "resolved": "https://registry.npmjs.org/mqtt/-/mqtt-5.3.6.tgz",
+ "integrity": "sha512-3XeyCdHRFf3zZdUUBt/pqprKPtUABc8O4ZGPGs2QPO4sPNTnJels8U2UtBtMt09QCgpUmw8gLTLy2R7verR7kQ==",
+ "dependencies": {
+ "@types/readable-stream": "^4.0.5",
+ "@types/ws": "^8.5.9",
+ "commist": "^3.2.0",
+ "concat-stream": "^2.0.0",
+ "debug": "^4.3.4",
+ "help-me": "^5.0.0",
+ "lru-cache": "^10.0.1",
+ "minimist": "^1.2.8",
+ "mqtt": "^5.2.0",
+ "mqtt-packet": "^9.0.0",
+ "number-allocator": "^1.0.14",
+ "readable-stream": "^4.4.2",
+ "reinterval": "^1.1.0",
+ "rfdc": "^1.3.0",
+ "split2": "^4.2.0",
+ "worker-timers": "^7.0.78",
+ "ws": "^8.14.2"
+ },
+ "bin": {
+ "mqtt": "build/bin/mqtt.js",
+ "mqtt_pub": "build/bin/pub.js",
+ "mqtt_sub": "build/bin/sub.js"
+ },
+ "engines": {
+ "node": ">=16.0.0"
+ }
+ },
+ "node_modules/mqtt-packet": {
+ "version": "9.0.0",
+ "resolved": "https://registry.npmjs.org/mqtt-packet/-/mqtt-packet-9.0.0.tgz",
+ "integrity": "sha512-8v+HkX+fwbodsWAZIZTI074XIoxVBOmPeggQuDFCGg1SqNcC+uoRMWu7J6QlJPqIUIJXmjNYYHxBBLr1Y/Df4w==",
+ "dependencies": {
+ "bl": "^6.0.8",
+ "debug": "^4.3.4",
+ "process-nextick-args": "^2.0.1"
+ }
+ },
+ "node_modules/mqtt-packet/node_modules/debug": {
+ "version": "4.3.4",
+ "resolved": "https://registry.npmjs.org/debug/-/debug-4.3.4.tgz",
+ "integrity": "sha512-PRWFHuSU3eDtQJPvnNY7Jcket1j0t5OuOsFzPPzsekD52Zl8qUfFIPEiswXqIvHWGVHOgX+7G/vCNNhehwxfkQ==",
+ "dependencies": {
+ "ms": "2.1.2"
+ },
+ "engines": {
+ "node": ">=6.0"
+ },
+ "peerDependenciesMeta": {
+ "supports-color": {
+ "optional": true
+ }
+ }
+ },
+ "node_modules/mqtt-packet/node_modules/ms": {
+ "version": "2.1.2",
+ "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.2.tgz",
+ "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w=="
+ },
+ "node_modules/mqtt/node_modules/debug": {
+ "version": "4.3.4",
+ "resolved": "https://registry.npmjs.org/debug/-/debug-4.3.4.tgz",
+ "integrity": "sha512-PRWFHuSU3eDtQJPvnNY7Jcket1j0t5OuOsFzPPzsekD52Zl8qUfFIPEiswXqIvHWGVHOgX+7G/vCNNhehwxfkQ==",
+ "dependencies": {
+ "ms": "2.1.2"
+ },
+ "engines": {
+ "node": ">=6.0"
+ },
+ "peerDependenciesMeta": {
+ "supports-color": {
+ "optional": true
+ }
+ }
+ },
+ "node_modules/mqtt/node_modules/ms": {
+ "version": "2.1.2",
+ "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.2.tgz",
+ "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w=="
+ },
"node_modules/ms": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz",
@@ -530,17 +884,36 @@
"node": ">= 0.6"
}
},
- "node_modules/node-cache": {
- "version": "5.1.2",
- "resolved": "https://registry.npmjs.org/node-cache/-/node-cache-5.1.2.tgz",
- "integrity": "sha512-t1QzWwnk4sjLWaQAS8CHgOJ+RAfmHpxFWmc36IWTiWHQfs0w5JDMBS1b1ZxQteo0vVVuWJvIUKHDkkeK7vIGCg==",
+ "node_modules/number-allocator": {
+ "version": "1.0.14",
+ "resolved": "https://registry.npmjs.org/number-allocator/-/number-allocator-1.0.14.tgz",
+ "integrity": "sha512-OrL44UTVAvkKdOdRQZIJpLkAdjXGTRda052sN4sO77bKEzYYqWKMBjQvrJFzqygI99gL6Z4u2xctPW1tB8ErvA==",
"dependencies": {
- "clone": "2.x"
+ "debug": "^4.3.1",
+ "js-sdsl": "4.3.0"
+ }
+ },
+ "node_modules/number-allocator/node_modules/debug": {
+ "version": "4.3.4",
+ "resolved": "https://registry.npmjs.org/debug/-/debug-4.3.4.tgz",
+ "integrity": "sha512-PRWFHuSU3eDtQJPvnNY7Jcket1j0t5OuOsFzPPzsekD52Zl8qUfFIPEiswXqIvHWGVHOgX+7G/vCNNhehwxfkQ==",
+ "dependencies": {
+ "ms": "2.1.2"
},
"engines": {
- "node": ">= 8.0.0"
+ "node": ">=6.0"
+ },
+ "peerDependenciesMeta": {
+ "supports-color": {
+ "optional": true
+ }
}
},
+ "node_modules/number-allocator/node_modules/ms": {
+ "version": "2.1.2",
+ "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.2.tgz",
+ "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w=="
+ },
"node_modules/object-inspect": {
"version": "1.13.1",
"resolved": "https://registry.npmjs.org/object-inspect/-/object-inspect-1.13.1.tgz",
@@ -573,6 +946,58 @@
"resolved": "https://registry.npmjs.org/path-to-regexp/-/path-to-regexp-0.1.7.tgz",
"integrity": "sha512-5DFkuoqlv1uYQKxy8omFBeJPQcdoE07Kv2sferDCrAq1ohOU+MSDswDIbnx3YAM60qIOnYa53wBhXW0EbMonrQ=="
},
+ "node_modules/prisma": {
+ "version": "5.10.2",
+ "resolved": "https://registry.npmjs.org/prisma/-/prisma-5.10.2.tgz",
+ "integrity": "sha512-hqb/JMz9/kymRE25pMWCxkdyhbnIWrq+h7S6WysJpdnCvhstbJSNP/S6mScEcqiB8Qv2F+0R3yG+osRaWqZacQ==",
+ "devOptional": true,
+ "hasInstallScript": true,
+ "dependencies": {
+ "@prisma/engines": "5.10.2"
+ },
+ "bin": {
+ "prisma": "build/index.js"
+ },
+ "engines": {
+ "node": ">=16.13"
+ }
+ },
+ "node_modules/process": {
+ "version": "0.11.10",
+ "resolved": "https://registry.npmjs.org/process/-/process-0.11.10.tgz",
+ "integrity": "sha512-cdGef/drWFoydD1JsMzuFf8100nZl+GT+yacc2bEced5f9Rjk4z+WtFUTBu9PhOi9j/jfmBPu0mMEY4wIdAF8A==",
+ "engines": {
+ "node": ">= 0.6.0"
+ }
+ },
+ "node_modules/process-nextick-args": {
+ "version": "2.0.1",
+ "resolved": "https://registry.npmjs.org/process-nextick-args/-/process-nextick-args-2.0.1.tgz",
+ "integrity": "sha512-3ouUOpQhtgrbOa17J7+uxOTpITYWaGP7/AhoR3+A+/1e9skrzelGi/dXzEYyvbxubEF6Wn2ypscTKiKJFFn1ag=="
+ },
+ "node_modules/protobufjs": {
+ "version": "7.2.6",
+ "resolved": "https://registry.npmjs.org/protobufjs/-/protobufjs-7.2.6.tgz",
+ "integrity": "sha512-dgJaEDDL6x8ASUZ1YqWciTRrdOuYNzoOf27oHNfdyvKqHr5i0FV7FSLU+aIeFjyFgVxrpTOtQUi0BLLBymZaBw==",
+ "hasInstallScript": true,
+ "dependencies": {
+ "@protobufjs/aspromise": "^1.1.2",
+ "@protobufjs/base64": "^1.1.2",
+ "@protobufjs/codegen": "^2.0.4",
+ "@protobufjs/eventemitter": "^1.1.0",
+ "@protobufjs/fetch": "^1.1.0",
+ "@protobufjs/float": "^1.0.2",
+ "@protobufjs/inquire": "^1.1.0",
+ "@protobufjs/path": "^1.1.2",
+ "@protobufjs/pool": "^1.1.0",
+ "@protobufjs/utf8": "^1.1.0",
+ "@types/node": ">=13.7.0",
+ "long": "^5.0.0"
+ },
+ "engines": {
+ "node": ">=12.0.0"
+ }
+ },
"node_modules/proxy-addr": {
"version": "2.0.7",
"resolved": "https://registry.npmjs.org/proxy-addr/-/proxy-addr-2.0.7.tgz",
@@ -585,11 +1010,6 @@
"node": ">= 0.10"
}
},
- "node_modules/proxy-from-env": {
- "version": "1.1.0",
- "resolved": "https://registry.npmjs.org/proxy-from-env/-/proxy-from-env-1.1.0.tgz",
- "integrity": "sha512-D+zkORCbA9f1tdWRK0RaCR3GPv50cMxcrz4X8k5LTSUD1Dkw47mKJEZQNunItRTkWwgtaUSo1RVFRIG9ZXiFYg=="
- },
"node_modules/qs": {
"version": "6.11.0",
"resolved": "https://registry.npmjs.org/qs/-/qs-6.11.0.tgz",
@@ -626,6 +1046,36 @@
"node": ">= 0.8"
}
},
+ "node_modules/readable-stream": {
+ "version": "4.5.2",
+ "resolved": "https://registry.npmjs.org/readable-stream/-/readable-stream-4.5.2.tgz",
+ "integrity": "sha512-yjavECdqeZ3GLXNgRXgeQEdz9fvDDkNKyHnbHRFtOr7/LcfgBcmct7t/ET+HaCTqfh06OzoAxrkN/IfjJBVe+g==",
+ "dependencies": {
+ "abort-controller": "^3.0.0",
+ "buffer": "^6.0.3",
+ "events": "^3.3.0",
+ "process": "^0.11.10",
+ "string_decoder": "^1.3.0"
+ },
+ "engines": {
+ "node": "^12.22.0 || ^14.17.0 || >=16.0.0"
+ }
+ },
+ "node_modules/regenerator-runtime": {
+ "version": "0.14.1",
+ "resolved": "https://registry.npmjs.org/regenerator-runtime/-/regenerator-runtime-0.14.1.tgz",
+ "integrity": "sha512-dYnhHh0nJoMfnkZs6GmmhFknAGRrLznOu5nc9ML+EJxGvrx6H7teuevqVqCuPcPK//3eDrrjQhehXVx9cnkGdw=="
+ },
+ "node_modules/reinterval": {
+ "version": "1.1.0",
+ "resolved": "https://registry.npmjs.org/reinterval/-/reinterval-1.1.0.tgz",
+ "integrity": "sha512-QIRet3SYrGp0HUHO88jVskiG6seqUGC5iAG7AwI/BV4ypGcuqk9Du6YQBUOUqm9c8pw1eyLoIaONifRua1lsEQ=="
+ },
+ "node_modules/rfdc": {
+ "version": "1.3.1",
+ "resolved": "https://registry.npmjs.org/rfdc/-/rfdc-1.3.1.tgz",
+ "integrity": "sha512-r5a3l5HzYlIC68TpmYKlxWjmOP6wiPJ1vWv2HeLhNsRZMrCkxeqxiHlQ21oXmQ4F3SiryXBHhAD7JZqvOJjFmg=="
+ },
"node_modules/safe-buffer": {
"version": "5.2.1",
"resolved": "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.2.1.tgz",
@@ -730,6 +1180,14 @@
"url": "https://github.com/sponsors/ljharb"
}
},
+ "node_modules/split2": {
+ "version": "4.2.0",
+ "resolved": "https://registry.npmjs.org/split2/-/split2-4.2.0.tgz",
+ "integrity": "sha512-UcjcJOWknrNkF6PLX83qcHM6KHgVKNkV62Y8a5uYDVv9ydGQVwAHMKqHdJje1VTWpljG0WYpCDhrCdAOYH4TWg==",
+ "engines": {
+ "node": ">= 10.x"
+ }
+ },
"node_modules/statuses": {
"version": "2.0.1",
"resolved": "https://registry.npmjs.org/statuses/-/statuses-2.0.1.tgz",
@@ -738,6 +1196,14 @@
"node": ">= 0.8"
}
},
+ "node_modules/string_decoder": {
+ "version": "1.3.0",
+ "resolved": "https://registry.npmjs.org/string_decoder/-/string_decoder-1.3.0.tgz",
+ "integrity": "sha512-hkRX8U1WjJFd8LsDJ2yQ/wWWxaopEsABU1XfkM8A+j0+85JAGppt16cr1Whg6KIbb4okU6Mql6BOj+uup/wKeA==",
+ "dependencies": {
+ "safe-buffer": "~5.2.0"
+ }
+ },
"node_modules/toidentifier": {
"version": "1.0.1",
"resolved": "https://registry.npmjs.org/toidentifier/-/toidentifier-1.0.1.tgz",
@@ -746,6 +1212,11 @@
"node": ">=0.6"
}
},
+ "node_modules/tslib": {
+ "version": "2.6.2",
+ "resolved": "https://registry.npmjs.org/tslib/-/tslib-2.6.2.tgz",
+ "integrity": "sha512-AEYxH93jGFPn/a2iVAwW87VuUIkR1FVUKB77NwMF7nBTDkDrrT/Hpt/IrCJ0QXhW27jTBDcf5ZY7w6RiqTMw2Q=="
+ },
"node_modules/type-is": {
"version": "1.6.18",
"resolved": "https://registry.npmjs.org/type-is/-/type-is-1.6.18.tgz",
@@ -758,6 +1229,16 @@
"node": ">= 0.6"
}
},
+ "node_modules/typedarray": {
+ "version": "0.0.6",
+ "resolved": "https://registry.npmjs.org/typedarray/-/typedarray-0.0.6.tgz",
+ "integrity": "sha512-/aCDEGatGvZ2BIk+HmLf4ifCJFwvKFNb9/JeZPMulfgFracn9QFcAf5GO8B/mweUjSoblS5In0cWhqpfs/5PQA=="
+ },
+ "node_modules/undici-types": {
+ "version": "5.26.5",
+ "resolved": "https://registry.npmjs.org/undici-types/-/undici-types-5.26.5.tgz",
+ "integrity": "sha512-JlCMO+ehdEIKqlFxk6IfVoAUVmgz7cU7zD/h9XZ0qzeosSHmUJVOzSQvvYSYWXkFXC+IfLKSIffhv0sVZup6pA=="
+ },
"node_modules/unpipe": {
"version": "1.0.0",
"resolved": "https://registry.npmjs.org/unpipe/-/unpipe-1.0.0.tgz",
@@ -766,6 +1247,11 @@
"node": ">= 0.8"
}
},
+ "node_modules/util-deprecate": {
+ "version": "1.0.2",
+ "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz",
+ "integrity": "sha512-EPD5q1uXyFxJpCrLnCc1nHnq3gOa6DZBocAIiI2TaSCA7VCJ1UJDMagCzIkXNsUYfD1daK//LTEQ8xiIbrHtcw=="
+ },
"node_modules/utils-merge": {
"version": "1.0.1",
"resolved": "https://registry.npmjs.org/utils-merge/-/utils-merge-1.0.1.tgz",
@@ -781,6 +1267,57 @@
"engines": {
"node": ">= 0.8"
}
+ },
+ "node_modules/worker-timers": {
+ "version": "7.1.4",
+ "resolved": "https://registry.npmjs.org/worker-timers/-/worker-timers-7.1.4.tgz",
+ "integrity": "sha512-8PRtiPAyeYukrY+iOUL+0tq4Zn5qyCHrTqFTtHxcESfIxGyulxNwyzQkybrYBKhnMWmx0bku3wxRfE1hts5R6Q==",
+ "dependencies": {
+ "@babel/runtime": "^7.24.0",
+ "tslib": "^2.6.2",
+ "worker-timers-broker": "^6.1.4",
+ "worker-timers-worker": "^7.0.67"
+ }
+ },
+ "node_modules/worker-timers-broker": {
+ "version": "6.1.4",
+ "resolved": "https://registry.npmjs.org/worker-timers-broker/-/worker-timers-broker-6.1.4.tgz",
+ "integrity": "sha512-y3D+Yfj37lrItEMIlcfCm/IRueYtYKgpLlTG2wgTIZ9PSw0n/K4kweilgk3gTC4ahbQNVGT90lU+Rf7W4M5bsw==",
+ "dependencies": {
+ "@babel/runtime": "^7.24.0",
+ "fast-unique-numbers": "^8.0.13",
+ "tslib": "^2.6.2",
+ "worker-timers-worker": "^7.0.67"
+ }
+ },
+ "node_modules/worker-timers-worker": {
+ "version": "7.0.67",
+ "resolved": "https://registry.npmjs.org/worker-timers-worker/-/worker-timers-worker-7.0.67.tgz",
+ "integrity": "sha512-0ZP2+v2fyiiiGaCEdWxMRUk5YxGFwWdRGB12ZfQy13vw8/27Xd+MW3ua56qlcM30nzjpddXXzLuEpHhGW+Pz7w==",
+ "dependencies": {
+ "@babel/runtime": "^7.24.0",
+ "tslib": "^2.6.2"
+ }
+ },
+ "node_modules/ws": {
+ "version": "8.16.0",
+ "resolved": "https://registry.npmjs.org/ws/-/ws-8.16.0.tgz",
+ "integrity": "sha512-HS0c//TP7Ina87TfiPUz1rQzMhHrl/SG2guqRcTOIUYD2q8uhUdNHZYJUaQ8aTGPzCh+c6oawMKW35nFl1dxyQ==",
+ "engines": {
+ "node": ">=10.0.0"
+ },
+ "peerDependencies": {
+ "bufferutil": "^4.0.1",
+ "utf-8-validate": ">=5.0.2"
+ },
+ "peerDependenciesMeta": {
+ "bufferutil": {
+ "optional": true
+ },
+ "utf-8-validate": {
+ "optional": true
+ }
+ }
}
}
}
diff --git a/package.json b/package.json
index af1c061..0a8e437 100644
--- a/package.json
+++ b/package.json
@@ -9,8 +9,12 @@
"author": "",
"license": "ISC",
"dependencies": {
- "axios": "^1.6.7",
+ "@prisma/client": "^5.11.0",
"express": "^4.18.3",
- "node-cache": "^5.1.2"
+ "mqtt": "^5.3.6",
+ "protobufjs": "^7.2.6"
+ },
+ "devDependencies": {
+ "prisma": "^5.10.2"
}
}
diff --git a/prisma/migrations/20240312135520_create_nodes_table/migration.sql b/prisma/migrations/20240312135520_create_nodes_table/migration.sql
new file mode 100644
index 0000000..f4594b7
--- /dev/null
+++ b/prisma/migrations/20240312135520_create_nodes_table/migration.sql
@@ -0,0 +1,17 @@
+-- CreateTable
+CREATE TABLE `nodes` (
+ `id` BIGINT NOT NULL AUTO_INCREMENT,
+ `node_id` BIGINT NOT NULL,
+ `long_name` VARCHAR(191) NOT NULL,
+ `short_name` VARCHAR(191) NOT NULL,
+ `hardware_model` INTEGER NOT NULL,
+ `is_licensed` BOOLEAN NOT NULL,
+ `role` INTEGER NOT NULL,
+ `created_at` DATETIME(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3),
+ `updated_at` DATETIME(3) NOT NULL DEFAULT CURRENT_TIMESTAMP(3),
+
+ UNIQUE INDEX `nodes_node_id_key`(`node_id`),
+ INDEX `nodes_created_at_idx`(`created_at`),
+ INDEX `nodes_updated_at_idx`(`updated_at`),
+ PRIMARY KEY (`id`)
+) DEFAULT CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;
diff --git a/prisma/migrations/20240312140821_add_position_columns_to_nodes_table/migration.sql b/prisma/migrations/20240312140821_add_position_columns_to_nodes_table/migration.sql
new file mode 100644
index 0000000..41aaebe
--- /dev/null
+++ b/prisma/migrations/20240312140821_add_position_columns_to_nodes_table/migration.sql
@@ -0,0 +1,4 @@
+-- AlterTable
+ALTER TABLE `nodes` ADD COLUMN `altitude` INTEGER NULL,
+ ADD COLUMN `latitude` INTEGER NULL,
+ ADD COLUMN `longitude` INTEGER NULL;
diff --git a/prisma/migrations/migration_lock.toml b/prisma/migrations/migration_lock.toml
new file mode 100644
index 0000000..e5a788a
--- /dev/null
+++ b/prisma/migrations/migration_lock.toml
@@ -0,0 +1,3 @@
+# Please do not edit this file manually
+# It should be added in your version-control system (i.e. Git)
+provider = "mysql"
\ No newline at end of file
diff --git a/prisma/schema.prisma b/prisma/schema.prisma
new file mode 100644
index 0000000..2e28f60
--- /dev/null
+++ b/prisma/schema.prisma
@@ -0,0 +1,35 @@
+// This is your Prisma schema file,
+// learn more about it in the docs: https://pris.ly/d/prisma-schema
+
+// Looking for ways to speed up your queries, or scale easily with your serverless or edge functions?
+// Try Prisma Accelerate: https://pris.ly/cli/accelerate-init
+
+generator client {
+ provider = "prisma-client-js"
+}
+
+datasource db {
+ provider = "mysql"
+ url = env("DATABASE_URL")
+}
+
+model Node {
+ id BigInt @id @default(autoincrement())
+ node_id BigInt @unique
+ long_name String
+ short_name String
+ hardware_model Int
+ is_licensed Boolean
+ role Int
+
+ latitude Int?
+ longitude Int?
+ altitude Int?
+
+ created_at DateTime @default(now())
+ updated_at DateTime @default(now()) @updatedAt
+
+ @@index(created_at)
+ @@index(updated_at)
+ @@map("nodes")
+}
diff --git a/src/index.js b/src/index.js
index d0d7b18..a208ab2 100644
--- a/src/index.js
+++ b/src/index.js
@@ -1,36 +1,28 @@
const path = require('path');
-const axios = require('axios');
const express = require('express');
-const NodeCache = require("node-cache");
-const cache = new NodeCache();
+const protobufjs = require("protobufjs");
+
+// create prisma db client
+const { PrismaClient } = require("@prisma/client");
+const prisma = new PrismaClient();
+
+// return big ints as string when using JSON.stringify
+BigInt.prototype.toJSON = function() {
+ return this.toString();
+}
+
+// load protobufs
+const root = new protobufjs.Root();
+root.resolvePath = (origin, target) => path.join(__dirname, "protos", target);
+root.loadSync('meshtastic/mqtt.proto');
+const HardwareModel = root.lookupEnum("HardwareModel");
+const Role = root.lookupEnum("Config.DeviceConfig.Role");
const app = express();
// serve files inside the public folder from /
app.use('/', express.static(path.join(__dirname, 'public')));
-async function getCached(key, ttl, callback) {
-
- // find data from cache
- let data = cache.get(key);
-
- // update cache
- if(!data){
- data = await callback();
- cache.set(key, data, ttl);
- }
-
- // get expiration time in seconds
- const cacheTtl = cache.getTtl(key);
- const expiresIn = cacheTtl != null
- ? Math.ceil((cacheTtl - Date.now()) / 1000)
- : 0;
-
- // return data
- return [ data, expiresIn ];
-
-}
-
app.get('/', async (req, res) => {
res.sendFile(path.join(__dirname, 'public/index.html'));
});
@@ -59,15 +51,18 @@ app.get('/api', async (req, res) => {
app.get('/api/v1/nodes', async (req, res) => {
try {
- // get nodes from cache, or retrieve from api
- const [ nodes, expiresIn ] = await getCached('nodes', 10, async () => {
- const response = await axios.get("https://meshmap.net/nodes2.json");
- return response.data;
- });
+ // get nodes from db
+ const nodes = await prisma.node.findMany();
res.json({
- expires_in: expiresIn,
- nodes: nodes,
+ nodes: nodes.map((node) => {
+ return {
+ ...node,
+ node_id_hex: "!" + node.node_id.toString(16),
+ hardware_model_name: HardwareModel.valuesById[node.hardware_model] ?? "UNKNOWN",
+ role_name: Role.valuesById[node.role] ?? "UNKNOWN",
+ }
+ }),
});
} catch(err) {
diff --git a/src/mqtt.js b/src/mqtt.js
new file mode 100644
index 0000000..7bfea32
--- /dev/null
+++ b/src/mqtt.js
@@ -0,0 +1,165 @@
+const crypto = require("crypto");
+const path = require("path");
+const mqtt = require("mqtt");
+const protobufjs = require("protobufjs");
+
+// create prisma db client
+const { PrismaClient } = require("@prisma/client");
+const prisma = new PrismaClient();
+
+// create mqtt client
+const client = mqtt.connect("mqtt://mqtt.meshtastic.org", {
+ username: "meshdev",
+ password: "large4cats",
+});
+
+// load protobufs
+const root = new protobufjs.Root();
+root.resolvePath = (origin, target) => path.join(__dirname, "protos", target);
+root.loadSync('meshtastic/mqtt.proto');
+const Data = root.lookupType("Data");
+const ServiceEnvelope = root.lookupType("ServiceEnvelope");
+const Position = root.lookupType("Position");
+const User = root.lookupType("User");
+
+function createNonce(packetId, fromNode) {
+
+ // Expand packetId to 64 bits
+ const packetId64 = BigInt(packetId);
+
+ // Initialize block counter (32-bit, starts at zero)
+ const blockCounter = 0;
+
+ // Create a buffer for the nonce
+ const buf = Buffer.alloc(16);
+
+ // Write packetId, fromNode, and block counter to the buffer
+ buf.writeBigUInt64LE(packetId64, 0);
+ buf.writeUInt32LE(fromNode, 8);
+ buf.writeUInt32LE(blockCounter, 12);
+
+ return buf;
+
+}
+
+/**
+ * References:
+ * https://github.com/crypto-smoke/meshtastic-go/blob/develop/radio/aes.go#L42
+ * https://github.com/pdxlocations/Meshtastic-MQTT-Connect/blob/main/meshtastic-mqtt-connect.py#L381
+ */
+function decrypt(packet) {
+ try {
+
+ // default encryption key
+ const key = Buffer.from("1PG7OiApB1nwvP+rz05pAQ==", "base64");
+
+ // create decryption iv/nonce for this packet
+ const nonceBuffer = createNonce(packet.id, packet.from);
+
+ // create aes-128-ctr decipher
+ const decipher = crypto.createDecipheriv('aes-128-ctr', key, nonceBuffer);
+
+ // decrypt encrypted packet
+ const decryptedBuffer = Buffer.concat([decipher.update(packet.encrypted), decipher.final()]);
+
+ // parse as data message
+ return Data.decode(decryptedBuffer);
+
+ } catch(e) {
+ return null;
+ }
+}
+
+// subscribe to everything when connected
+client.on("connect", () => {
+ client.subscribe("#");
+});
+
+// handle message received
+client.on("message", async (topic, message) => {
+ try {
+
+ // decode service envelope
+ const envelope = ServiceEnvelope.decode(message);
+
+ // attempt to decrypt encrypted packets
+ const isEncrypted = envelope.packet.encrypted?.length > 0;
+ if(isEncrypted){
+ const decoded = decrypt(envelope.packet);
+ if(decoded){
+ envelope.packet.decoded = decoded;
+ }
+ }
+
+ const portnum = envelope.packet?.decoded?.portnum;
+
+ if(portnum === 3) {
+
+ const position = Position.decode(envelope.packet.decoded.payload);
+
+ console.log("POSITION_APP", {
+ from: envelope.packet.from.toString(16),
+ position: position,
+ });
+
+ // update node position in db
+ if(position.latitudeI != null && position.longitudeI){
+ try {
+ await prisma.node.updateMany({
+ where: {
+ node_id: envelope.packet.from,
+ },
+ data: {
+ latitude: position.latitudeI,
+ longitude: position.longitudeI,
+ altitude: position.altitude !== 0 ? position.altitude : null,
+ },
+ });
+ } catch (e) {
+ console.error(e);
+ }
+ }
+
+ }
+
+ if(portnum === 4) {
+
+ const user = User.decode(envelope.packet.decoded.payload);
+
+ console.log("NODEINFO_APP", {
+ from: envelope.packet.from.toString(16),
+ user: user,
+ });
+
+ // create or update node in db
+ try {
+ await prisma.node.upsert({
+ where: {
+ node_id: envelope.packet.from,
+ },
+ create: {
+ node_id: envelope.packet.from,
+ long_name: user.longName,
+ short_name: user.shortName,
+ hardware_model: user.hwModel,
+ is_licensed: user.isLicensed === true,
+ role: user.role,
+ },
+ update: {
+ long_name: user.longName,
+ short_name: user.shortName,
+ hardware_model: user.hwModel,
+ is_licensed: user.isLicensed === true,
+ role: user.role,
+ },
+ });
+ } catch (e) {
+ console.error(e);
+ }
+
+ }
+
+ } catch(e) {
+ // ignore errors
+ }
+});
diff --git a/src/protos/meshtastic/admin.options b/src/protos/meshtastic/admin.options
new file mode 100644
index 0000000..1d582e2
--- /dev/null
+++ b/src/protos/meshtastic/admin.options
@@ -0,0 +1,12 @@
+*AdminMessage.payload_variant anonymous_oneof:true
+
+*AdminMessage.set_canned_message_module_messages max_size:201
+*AdminMessage.get_canned_message_module_messages_response max_size:201
+*AdminMessage.delete_file_request max_size:201
+
+*AdminMessage.set_ringtone_message max_size:231
+*AdminMessage.get_ringtone_response max_size:231
+
+*HamParameters.call_sign max_size:8
+*HamParameters.short_name max_size:6
+*NodeRemoteHardwarePinsResponse.node_remote_hardware_pins max_count:16
\ No newline at end of file
diff --git a/src/protos/meshtastic/admin.proto b/src/protos/meshtastic/admin.proto
new file mode 100644
index 0000000..01295f4
--- /dev/null
+++ b/src/protos/meshtastic/admin.proto
@@ -0,0 +1,364 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/channel.proto";
+import "meshtastic/config.proto";
+import "meshtastic/connection_status.proto";
+import "meshtastic/deviceonly.proto";
+import "meshtastic/mesh.proto";
+import "meshtastic/module_config.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "AdminProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This message is handled by the Admin module and is responsible for all settings/channel read/write operations.
+ * This message is used to do settings operations to both remote AND local nodes.
+ * (Prior to 1.2 these operations were done via special ToRadio operations)
+ */
+message AdminMessage {
+ /*
+ * TODO: REPLACE
+ */
+ enum ConfigType {
+ /*
+ * TODO: REPLACE
+ */
+ DEVICE_CONFIG = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ POSITION_CONFIG = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ POWER_CONFIG = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ NETWORK_CONFIG = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ DISPLAY_CONFIG = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ LORA_CONFIG = 5;
+
+ /*
+ * TODO: REPLACE
+ */
+ BLUETOOTH_CONFIG = 6;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ enum ModuleConfigType {
+ /*
+ * TODO: REPLACE
+ */
+ MQTT_CONFIG = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ SERIAL_CONFIG = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ EXTNOTIF_CONFIG = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ STOREFORWARD_CONFIG = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ RANGETEST_CONFIG = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ TELEMETRY_CONFIG = 5;
+
+ /*
+ * TODO: REPLACE
+ */
+ CANNEDMSG_CONFIG = 6;
+
+ /*
+ * TODO: REPLACE
+ */
+ AUDIO_CONFIG = 7;
+
+ /*
+ * TODO: REPLACE
+ */
+ REMOTEHARDWARE_CONFIG = 8;
+
+ /*
+ * TODO: REPLACE
+ */
+ NEIGHBORINFO_CONFIG = 9;
+
+ /*
+ * TODO: REPLACE
+ */
+ AMBIENTLIGHTING_CONFIG = 10;
+
+ /*
+ * TODO: REPLACE
+ */
+ DETECTIONSENSOR_CONFIG = 11;
+
+ /*
+ * TODO: REPLACE
+ */
+ PAXCOUNTER_CONFIG = 12;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ oneof payload_variant {
+ /*
+ * Send the specified channel in the response to this message
+ * NOTE: This field is sent with the channel index + 1 (to ensure we never try to send 'zero' - which protobufs treats as not present)
+ */
+ uint32 get_channel_request = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ Channel get_channel_response = 2;
+
+ /*
+ * Send the current owner data in the response to this message.
+ */
+ bool get_owner_request = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ User get_owner_response = 4;
+
+ /*
+ * Ask for the following config data to be sent
+ */
+ ConfigType get_config_request = 5;
+
+ /*
+ * Send the current Config in the response to this message.
+ */
+ Config get_config_response = 6;
+
+ /*
+ * Ask for the following config data to be sent
+ */
+ ModuleConfigType get_module_config_request = 7;
+
+ /*
+ * Send the current Config in the response to this message.
+ */
+ ModuleConfig get_module_config_response = 8;
+
+ /*
+ * Get the Canned Message Module messages in the response to this message.
+ */
+ bool get_canned_message_module_messages_request = 10;
+
+ /*
+ * Get the Canned Message Module messages in the response to this message.
+ */
+ string get_canned_message_module_messages_response = 11;
+
+ /*
+ * Request the node to send device metadata (firmware, protobuf version, etc)
+ */
+ bool get_device_metadata_request = 12;
+
+ /*
+ * Device metadata response
+ */
+ DeviceMetadata get_device_metadata_response = 13;
+
+ /*
+ * Get the Ringtone in the response to this message.
+ */
+ bool get_ringtone_request = 14;
+
+ /*
+ * Get the Ringtone in the response to this message.
+ */
+ string get_ringtone_response = 15;
+
+ /*
+ * Request the node to send it's connection status
+ */
+ bool get_device_connection_status_request = 16;
+
+ /*
+ * Device connection status response
+ */
+ DeviceConnectionStatus get_device_connection_status_response = 17;
+
+ /*
+ * Setup a node for licensed amateur (ham) radio operation
+ */
+ HamParameters set_ham_mode = 18;
+
+ /*
+ * Get the mesh's nodes with their available gpio pins for RemoteHardware module use
+ */
+ bool get_node_remote_hardware_pins_request = 19;
+
+ /*
+ * Respond with the mesh's nodes with their available gpio pins for RemoteHardware module use
+ */
+ NodeRemoteHardwarePinsResponse get_node_remote_hardware_pins_response = 20;
+
+ /*
+ * Enter (UF2) DFU mode
+ * Only implemented on NRF52 currently
+ */
+ bool enter_dfu_mode_request = 21;
+
+ /*
+ * Delete the file by the specified path from the device
+ */
+ string delete_file_request = 22;
+
+ /*
+ * Set the owner for this node
+ */
+ User set_owner = 32;
+
+ /*
+ * Set channels (using the new API).
+ * A special channel is the "primary channel".
+ * The other records are secondary channels.
+ * Note: only one channel can be marked as primary.
+ * If the client sets a particular channel to be primary, the previous channel will be set to SECONDARY automatically.
+ */
+ Channel set_channel = 33;
+
+ /*
+ * Set the current Config
+ */
+ Config set_config = 34;
+
+ /*
+ * Set the current Config
+ */
+ ModuleConfig set_module_config = 35;
+
+ /*
+ * Set the Canned Message Module messages text.
+ */
+ string set_canned_message_module_messages = 36;
+
+ /*
+ * Set the ringtone for ExternalNotification.
+ */
+ string set_ringtone_message = 37;
+
+ /*
+ * Remove the node by the specified node-num from the NodeDB on the device
+ */
+ uint32 remove_by_nodenum = 38;
+
+ /*
+ * Begins an edit transaction for config, module config, owner, and channel settings changes
+ * This will delay the standard *implicit* save to the file system and subsequent reboot behavior until committed (commit_edit_settings)
+ */
+ bool begin_edit_settings = 64;
+
+ /*
+ * Commits an open transaction for any edits made to config, module config, owner, and channel settings
+ */
+ bool commit_edit_settings = 65;
+
+ /*
+ * Tell the node to reboot into the OTA Firmware in this many seconds (or <0 to cancel reboot)
+ * Only Implemented for ESP32 Devices. This needs to be issued to send a new main firmware via bluetooth.
+ */
+ int32 reboot_ota_seconds = 95;
+
+ /*
+ * This message is only supported for the simulator Portduino build.
+ * If received the simulator will exit successfully.
+ */
+ bool exit_simulator = 96;
+
+ /*
+ * Tell the node to reboot in this many seconds (or <0 to cancel reboot)
+ */
+ int32 reboot_seconds = 97;
+
+ /*
+ * Tell the node to shutdown in this many seconds (or <0 to cancel shutdown)
+ */
+ int32 shutdown_seconds = 98;
+
+ /*
+ * Tell the node to factory reset, all device settings will be returned to factory defaults.
+ */
+ int32 factory_reset = 99;
+
+ /*
+ * Tell the node to reset the nodedb.
+ */
+ int32 nodedb_reset = 100;
+ }
+}
+
+/*
+ * Parameters for setting up Meshtastic for ameteur radio usage
+ */
+message HamParameters {
+ /*
+ * Amateur radio call sign, eg. KD2ABC
+ */
+ string call_sign = 1;
+
+ /*
+ * Transmit power in dBm at the LoRA transceiver, not including any amplification
+ */
+ int32 tx_power = 2;
+
+ /*
+ * The selected frequency of LoRA operation
+ * Please respect your local laws, regulations, and band plans.
+ * Ensure your radio is capable of operating of the selected frequency before setting this.
+ */
+ float frequency = 3;
+
+ /*
+ * Optional short name of user
+ */
+ string short_name = 4;
+}
+
+/*
+ * Response envelope for node_remote_hardware_pins
+ */
+message NodeRemoteHardwarePinsResponse {
+ /*
+ * Nodes and their respective remote hardware GPIO pins
+ */
+ repeated NodeRemoteHardwarePin node_remote_hardware_pins = 1;
+}
diff --git a/src/protos/meshtastic/apponly.options b/src/protos/meshtastic/apponly.options
new file mode 100644
index 0000000..28244de
--- /dev/null
+++ b/src/protos/meshtastic/apponly.options
@@ -0,0 +1 @@
+*ChannelSet.settings max_count:8
diff --git a/src/protos/meshtastic/apponly.proto b/src/protos/meshtastic/apponly.proto
new file mode 100644
index 0000000..100833f
--- /dev/null
+++ b/src/protos/meshtastic/apponly.proto
@@ -0,0 +1,31 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/channel.proto";
+import "meshtastic/config.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "AppOnlyProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This is the most compact possible representation for a set of channels.
+ * It includes only one PRIMARY channel (which must be first) and
+ * any SECONDARY channels.
+ * No DISABLED channels are included.
+ * This abstraction is used only on the the 'app side' of the world (ie python, javascript and android etc) to show a group of Channels as a (long) URL
+ */
+message ChannelSet {
+ /*
+ * Channel list with settings
+ */
+ repeated ChannelSettings settings = 1;
+
+ /*
+ * LoRa config
+ */
+ Config.LoRaConfig lora_config = 2;
+}
diff --git a/src/protos/meshtastic/atak.options b/src/protos/meshtastic/atak.options
new file mode 100644
index 0000000..c341400
--- /dev/null
+++ b/src/protos/meshtastic/atak.options
@@ -0,0 +1,6 @@
+*Contact.callsign max_size:120
+*Contact.device_callsign max_size:120
+*Status.battery int_size:8
+*PLI.course int_size:16
+*GeoChat.message max_size:200
+*GeoChat.to max_size:120
\ No newline at end of file
diff --git a/src/protos/meshtastic/atak.proto b/src/protos/meshtastic/atak.proto
new file mode 100644
index 0000000..c44479f
--- /dev/null
+++ b/src/protos/meshtastic/atak.proto
@@ -0,0 +1,251 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ATAKProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+/*
+ * Packets for the official ATAK Plugin
+ */
+message TAKPacket
+{
+ /*
+ * Are the payloads strings compressed for LoRA transport?
+ */
+ bool is_compressed = 1;
+ /*
+ * The contact / callsign for ATAK user
+ */
+ Contact contact = 2;
+ /*
+ * The group for ATAK user
+ */
+ Group group = 3;
+ /*
+ * The status of the ATAK EUD
+ */
+ Status status = 4;
+ /*
+ * The payload of the packet
+ */
+ oneof payload_variant {
+ /*
+ * TAK position report
+ */
+ PLI pli = 5;
+ /*
+ * ATAK GeoChat message
+ */
+ GeoChat chat = 6;
+ }
+}
+
+/*
+ * ATAK GeoChat message
+ */
+message GeoChat {
+ /*
+ * The text message
+ */
+ string message = 1;
+
+ /*
+ * Uid recipient of the message
+ */
+ optional string to = 2;
+}
+
+/*
+ * ATAK Group
+ * <__group role='Team Member' name='Cyan'/>
+ */
+message Group {
+ /*
+ * Role of the group member
+ */
+ MemberRole role = 1;
+ /*
+ * Team (color)
+ * Default Cyan
+ */
+ Team team = 2;
+}
+
+enum Team {
+ /*
+ * Unspecifed
+ */
+ Unspecifed_Color = 0;
+ /*
+ * White
+ */
+ White = 1;
+ /*
+ * Yellow
+ */
+ Yellow = 2;
+ /*
+ * Orange
+ */
+ Orange = 3;
+ /*
+ * Magenta
+ */
+ Magenta = 4;
+ /*
+ * Red
+ */
+ Red = 5;
+ /*
+ * Maroon
+ */
+ Maroon = 6;
+ /*
+ * Purple
+ */
+ Purple = 7;
+ /*
+ * Dark Blue
+ */
+ Dark_Blue = 8;
+ /*
+ * Blue
+ */
+ Blue = 9;
+ /*
+ * Cyan
+ */
+ Cyan = 10;
+ /*
+ * Teal
+ */
+ Teal = 11;
+ /*
+ * Green
+ */
+ Green = 12;
+ /*
+ * Dark Green
+ */
+ Dark_Green = 13;
+ /*
+ * Brown
+ */
+ Brown = 14;
+}
+
+/*
+ * Role of the group member
+ */
+enum MemberRole {
+ /*
+ * Unspecifed
+ */
+ Unspecifed = 0;
+ /*
+ * Team Member
+ */
+ TeamMember = 1;
+ /*
+ * Team Lead
+ */
+ TeamLead = 2;
+ /*
+ * Headquarters
+ */
+ HQ = 3;
+ /*
+ * Airsoft enthusiast
+ */
+ Sniper = 4;
+ /*
+ * Medic
+ */
+ Medic = 5;
+ /*
+ * ForwardObserver
+ */
+ ForwardObserver = 6;
+ /*
+ * Radio Telephone Operator
+ */
+ RTO = 7;
+ /*
+ * Doggo
+ */
+ K9 = 8;
+}
+
+/*
+ * ATAK EUD Status
+ *
+ */
+message Status {
+ /*
+ * Battery level
+ */
+ uint32 battery = 1;
+}
+/*
+ * ATAK Contact
+ *
+ */
+message Contact {
+ /*
+ * Callsign
+ */
+ string callsign = 1;
+
+ /*
+ * Device callsign
+ */
+ string device_callsign = 2;
+ /*
+ * IP address of endpoint in integer form (0.0.0.0 default)
+ */
+ // fixed32 enpoint_address = 3;
+ /*
+ * Port of endpoint (4242 default)
+ */
+ // uint32 endpoint_port = 4;
+ /*
+ * Phone represented as integer
+ * Terrible practice, but we really need the wire savings
+ */
+ // uint32 phone = 4;
+}
+
+/*
+ * Position Location Information from ATAK
+ */
+message PLI {
+ /*
+ * The new preferred location encoding, multiply by 1e-7 to get degrees
+ * in floating point
+ */
+ sfixed32 latitude_i = 1;
+
+ /*
+ * The new preferred location encoding, multiply by 1e-7 to get degrees
+ * in floating point
+ */
+ sfixed32 longitude_i = 2;
+
+ /*
+ * Altitude (ATAK prefers HAE)
+ */
+ int32 altitude = 3;
+
+ /*
+ * Speed
+ */
+ uint32 speed = 4;
+
+ /*
+ * Course in degrees
+ */
+ uint32 course = 5;
+}
diff --git a/src/protos/meshtastic/cannedmessages.options b/src/protos/meshtastic/cannedmessages.options
new file mode 100644
index 0000000..c1d537b
--- /dev/null
+++ b/src/protos/meshtastic/cannedmessages.options
@@ -0,0 +1 @@
+*CannedMessageModuleConfig.messages max_size:201
diff --git a/src/protos/meshtastic/cannedmessages.proto b/src/protos/meshtastic/cannedmessages.proto
new file mode 100644
index 0000000..baa5134
--- /dev/null
+++ b/src/protos/meshtastic/cannedmessages.proto
@@ -0,0 +1,19 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "CannedMessageConfigProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * Canned message module configuration.
+ */
+message CannedMessageModuleConfig {
+ /*
+ * Predefined messages for canned message module separated by '|' characters.
+ */
+ string messages = 1;
+}
diff --git a/src/protos/meshtastic/channel.options b/src/protos/meshtastic/channel.options
new file mode 100644
index 0000000..d0bdcbc
--- /dev/null
+++ b/src/protos/meshtastic/channel.options
@@ -0,0 +1,5 @@
+*Channel.index int_size:8
+
+# 256 bit or 128 bit psk key
+*ChannelSettings.psk max_size:32
+*ChannelSettings.name max_size:12
diff --git a/src/protos/meshtastic/channel.proto b/src/protos/meshtastic/channel.proto
new file mode 100644
index 0000000..2b10aaf
--- /dev/null
+++ b/src/protos/meshtastic/channel.proto
@@ -0,0 +1,150 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ChannelProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This information can be encoded as a QRcode/url so that other users can configure
+ * their radio to join the same channel.
+ * A note about how channel names are shown to users: channelname-X
+ * poundsymbol is a prefix used to indicate this is a channel name (idea from @professr).
+ * Where X is a letter from A-Z (base 26) representing a hash of the PSK for this
+ * channel - so that if the user changes anything about the channel (which does
+ * force a new PSK) this letter will also change. Thus preventing user confusion if
+ * two friends try to type in a channel name of "BobsChan" and then can't talk
+ * because their PSKs will be different.
+ * The PSK is hashed into this letter by "0x41 + [xor all bytes of the psk ] modulo 26"
+ * This also allows the option of someday if people have the PSK off (zero), the
+ * users COULD type in a channel name and be able to talk.
+ * FIXME: Add description of multi-channel support and how primary vs secondary channels are used.
+ * FIXME: explain how apps use channels for security.
+ * explain how remote settings and remote gpio are managed as an example
+ */
+message ChannelSettings {
+ /*
+ * Deprecated in favor of LoraConfig.channel_num
+ */
+ uint32 channel_num = 1 [deprecated = true];
+
+ /*
+ * A simple pre-shared key for now for crypto.
+ * Must be either 0 bytes (no crypto), 16 bytes (AES128), or 32 bytes (AES256).
+ * A special shorthand is used for 1 byte long psks.
+ * These psks should be treated as only minimally secure,
+ * because they are listed in this source code.
+ * Those bytes are mapped using the following scheme:
+ * `0` = No crypto
+ * `1` = The special "default" channel key: {0xd4, 0xf1, 0xbb, 0x3a, 0x20, 0x29, 0x07, 0x59, 0xf0, 0xbc, 0xff, 0xab, 0xcf, 0x4e, 0x69, 0x01}
+ * `2` through 10 = The default channel key, except with 1 through 9 added to the last byte.
+ * Shown to user as simple1 through 10
+ */
+ bytes psk = 2;
+
+ /*
+ * A SHORT name that will be packed into the URL.
+ * Less than 12 bytes.
+ * Something for end users to call the channel
+ * If this is the empty string it is assumed that this channel
+ * is the special (minimally secure) "Default"channel.
+ * In user interfaces it should be rendered as a local language translation of "X".
+ * For channel_num hashing empty string will be treated as "X".
+ * Where "X" is selected based on the English words listed above for ModemPreset
+ */
+ string name = 3;
+
+ /*
+ * Used to construct a globally unique channel ID.
+ * The full globally unique ID will be: "name.id" where ID is shown as base36.
+ * Assuming that the number of meshtastic users is below 20K (true for a long time)
+ * the chance of this 64 bit random number colliding with anyone else is super low.
+ * And the penalty for collision is low as well, it just means that anyone trying to decrypt channel messages might need to
+ * try multiple candidate channels.
+ * Any time a non wire compatible change is made to a channel, this field should be regenerated.
+ * There are a small number of 'special' globally known (and fairly) insecure standard channels.
+ * Those channels do not have a numeric id included in the settings, but instead it is pulled from
+ * a table of well known IDs.
+ * (see Well Known Channels FIXME)
+ */
+ fixed32 id = 4;
+
+ /*
+ * If true, messages on the mesh will be sent to the *public* internet by any gateway ndoe
+ */
+ bool uplink_enabled = 5;
+
+ /*
+ * If true, messages seen on the internet will be forwarded to the local mesh.
+ */
+ bool downlink_enabled = 6;
+
+ /*
+ * Per-channel module settings.
+ */
+ ModuleSettings module_settings = 7;
+}
+
+/*
+ * This message is specifically for modules to store per-channel configuration data.
+ */
+message ModuleSettings {
+/*
+ * Bits of precision for the location sent in position packets.
+ */
+ uint32 position_precision = 1;
+}
+
+/*
+ * A pair of a channel number, mode and the (sharable) settings for that channel
+ */
+message Channel {
+ /*
+ * How this channel is being used (or not).
+ * Note: this field is an enum to give us options for the future.
+ * In particular, someday we might make a 'SCANNING' option.
+ * SCANNING channels could have different frequencies and the radio would
+ * occasionally check that freq to see if anything is being transmitted.
+ * For devices that have multiple physical radios attached, we could keep multiple PRIMARY/SCANNING channels active at once to allow
+ * cross band routing as needed.
+ * If a device has only a single radio (the common case) only one channel can be PRIMARY at a time
+ * (but any number of SECONDARY channels can't be sent received on that common frequency)
+ */
+ enum Role {
+ /*
+ * This channel is not in use right now
+ */
+ DISABLED = 0;
+
+ /*
+ * This channel is used to set the frequency for the radio - all other enabled channels must be SECONDARY
+ */
+ PRIMARY = 1;
+
+ /*
+ * Secondary channels are only used for encryption/decryption/authentication purposes.
+ * Their radio settings (freq etc) are ignored, only psk is used.
+ */
+ SECONDARY = 2;
+ }
+
+ /*
+ * The index of this channel in the channel table (from 0 to MAX_NUM_CHANNELS-1)
+ * (Someday - not currently implemented) An index of -1 could be used to mean "set by name",
+ * in which case the target node will find and set the channel by settings.name.
+ */
+ int32 index = 1;
+
+ /*
+ * The new settings, or NULL to disable that channel
+ */
+ ChannelSettings settings = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ Role role = 3;
+}
diff --git a/src/protos/meshtastic/clientonly.options b/src/protos/meshtastic/clientonly.options
new file mode 100644
index 0000000..bc98b39
--- /dev/null
+++ b/src/protos/meshtastic/clientonly.options
@@ -0,0 +1,2 @@
+*DeviceProfile.long_name max_size:40
+*DeviceProfile.short_name max_size:5
\ No newline at end of file
diff --git a/src/protos/meshtastic/clientonly.proto b/src/protos/meshtastic/clientonly.proto
new file mode 100644
index 0000000..1d58b11
--- /dev/null
+++ b/src/protos/meshtastic/clientonly.proto
@@ -0,0 +1,50 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/localonly.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ClientOnlyProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This abstraction is used to contain any configuration for provisioning a node on any client.
+ * It is useful for importing and exporting configurations.
+ */
+message DeviceProfile {
+ /*
+ * Long name for the node
+ */
+ optional string long_name = 1;
+
+ /*
+ * Short name of the node
+ */
+ optional string short_name = 2;
+
+ /*
+ * The url of the channels from our node
+ */
+ optional string channel_url = 3;
+
+ /*
+ * The Config of the node
+ */
+ optional LocalConfig config = 4;
+
+ /*
+ * The ModuleConfig of the node
+ */
+ optional LocalModuleConfig module_config = 5;
+}
+
+/*
+ * A heartbeat message is sent by a node to indicate that it is still alive.
+ * This is currently only needed to keep serial connections alive.
+ */
+message Heartbeat {
+
+}
diff --git a/src/protos/meshtastic/config.options b/src/protos/meshtastic/config.options
new file mode 100644
index 0000000..4490f08
--- /dev/null
+++ b/src/protos/meshtastic/config.options
@@ -0,0 +1,14 @@
+*NetworkConfig.wifi_ssid max_size:33
+*NetworkConfig.wifi_psk max_size:65
+*NetworkConfig.ntp_server max_size:33
+*NetworkConfig.rsyslog_server max_size:33
+
+# Max of three ignored nodes for our testing
+*LoRaConfig.ignore_incoming max_count:3
+
+*LoRaConfig.tx_power int_size:8
+*LoRaConfig.bandwidth int_size:16
+*LoRaConfig.coding_rate int_size:8
+*LoRaConfig.channel_num int_size:16
+
+*PowerConfig.device_battery_ina_address int_size:8
diff --git a/src/protos/meshtastic/config.proto b/src/protos/meshtastic/config.proto
new file mode 100644
index 0000000..7ebbe45
--- /dev/null
+++ b/src/protos/meshtastic/config.proto
@@ -0,0 +1,955 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ConfigProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+message Config {
+ /*
+ * Configuration
+ */
+ message DeviceConfig {
+ /*
+ * Defines the device's role on the Mesh network
+ */
+ enum Role {
+ /*
+ * Description: App connected or stand alone messaging device.
+ * Technical Details: Default Role
+ */
+ CLIENT = 0;
+ /*
+ * Description: Device that does not forward packets from other devices.
+ */
+ CLIENT_MUTE = 1;
+
+ /*
+ * Description: Infrastructure node for extending network coverage by relaying messages. Visible in Nodes list.
+ * Technical Details: Mesh packets will prefer to be routed over this node. This node will not be used by client apps.
+ * The wifi radio and the oled screen will be put to sleep.
+ * This mode may still potentially have higher power usage due to it's preference in message rebroadcasting on the mesh.
+ */
+ ROUTER = 2;
+
+ /*
+ * Description: Combination of both ROUTER and CLIENT. Not for mobile devices.
+ */
+ ROUTER_CLIENT = 3;
+
+ /*
+ * Description: Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in Nodes list.
+ * Technical Details: Mesh packets will simply be rebroadcasted over this node. Nodes configured with this role will not originate NodeInfo, Position, Telemetry
+ * or any other packet type. They will simply rebroadcast any mesh packets on the same frequency, channel num, spread factor, and coding rate.
+ */
+ REPEATER = 4;
+
+ /*
+ * Description: Broadcasts GPS position packets as priority.
+ * Technical Details: Position Mesh packets will be prioritized higher and sent more frequently by default.
+ * When used in conjunction with power.is_power_saving = true, nodes will wake up,
+ * send position, and then sleep for position.position_broadcast_secs seconds.
+ */
+ TRACKER = 5;
+
+ /*
+ * Description: Broadcasts telemetry packets as priority.
+ * Technical Details: Telemetry Mesh packets will be prioritized higher and sent more frequently by default.
+ * When used in conjunction with power.is_power_saving = true, nodes will wake up,
+ * send environment telemetry, and then sleep for telemetry.environment_update_interval seconds.
+ */
+ SENSOR = 6;
+
+ /*
+ * Description: Optimized for ATAK system communication and reduces routine broadcasts.
+ * Technical Details: Used for nodes dedicated for connection to an ATAK EUD.
+ * Turns off many of the routine broadcasts to favor CoT packet stream
+ * from the Meshtastic ATAK plugin -> IMeshService -> Node
+ */
+ TAK = 7;
+
+ /*
+ * Description: Device that only broadcasts as needed for stealth or power savings.
+ * Technical Details: Used for nodes that "only speak when spoken to"
+ * Turns all of the routine broadcasts but allows for ad-hoc communication
+ * Still rebroadcasts, but with local only rebroadcast mode (known meshes only)
+ * Can be used for clandestine operation or to dramatically reduce airtime / power consumption
+ */
+ CLIENT_HIDDEN = 8;
+
+ /*
+ * Description: Broadcasts location as message to default channel regularly for to assist with device recovery.
+ * Technical Details: Used to automatically send a text message to the mesh
+ * with the current position of the device on a frequent interval:
+ * "I'm lost! Position: lat / long"
+ */
+ LOST_AND_FOUND = 9;
+
+ /*
+ * Description: Enables automatic TAK PLI broadcasts and reduces routine broadcasts.
+ * Technical Details: Turns off many of the routine broadcasts to favor ATAK CoT packet stream
+ * and automatic TAK PLI (position location information) broadcasts.
+ * Uses position module configuration to determine TAK PLI broadcast interval.
+ */
+ TAK_TRACKER = 10;
+ }
+
+ /*
+ * Defines the device's behavior for how messages are rebroadcast
+ */
+ enum RebroadcastMode {
+ /*
+ * Default behavior.
+ * Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora params.
+ */
+ ALL = 0;
+
+ /*
+ * Same as behavior as ALL but skips packet decoding and simply rebroadcasts them.
+ * Only available in Repeater role. Setting this on any other roles will result in ALL behavior.
+ */
+ ALL_SKIP_DECODING = 1;
+
+ /*
+ * Ignores observed messages from foreign meshes that are open or those which it cannot decrypt.
+ * Only rebroadcasts message on the nodes local primary / secondary channels.
+ */
+ LOCAL_ONLY = 2;
+
+ /*
+ * Ignores observed messages from foreign meshes like LOCAL_ONLY,
+ * but takes it step further by also ignoring messages from nodenums not in the node's known list (NodeDB)
+ */
+ KNOWN_ONLY = 3;
+ }
+
+ /*
+ * Sets the role of node
+ */
+ Role role = 1;
+
+ /*
+ * Disabling this will disable the SerialConsole by not initilizing the StreamAPI
+ */
+ bool serial_enabled = 2;
+
+ /*
+ * By default we turn off logging as soon as an API client connects (to keep shared serial link quiet).
+ * Set this to true to leave the debug log outputting even when API is active.
+ */
+ bool debug_log_enabled = 3;
+
+ /*
+ * For boards without a hard wired button, this is the pin number that will be used
+ * Boards that have more than one button can swap the function with this one. defaults to BUTTON_PIN if defined.
+ */
+ uint32 button_gpio = 4;
+
+ /*
+ * For boards without a PWM buzzer, this is the pin number that will be used
+ * Defaults to PIN_BUZZER if defined.
+ */
+ uint32 buzzer_gpio = 5;
+
+ /*
+ * Sets the role of node
+ */
+ RebroadcastMode rebroadcast_mode = 6;
+
+ /*
+ * Send our nodeinfo this often
+ * Defaults to 900 Seconds (15 minutes)
+ */
+ uint32 node_info_broadcast_secs = 7;
+
+ /*
+ * Treat double tap interrupt on supported accelerometers as a button press if set to true
+ */
+ bool double_tap_as_button_press = 8;
+
+ /*
+ * If true, device is considered to be "managed" by a mesh administrator
+ * Clients should then limit available configuration and administrative options inside the user interface
+ */
+ bool is_managed = 9;
+
+ /*
+ * Disables the triple-press of user button to enable or disable GPS
+ */
+ bool disable_triple_click = 10;
+ }
+
+ /*
+ * Position Config
+ */
+ message PositionConfig {
+ /*
+ * Bit field of boolean configuration options, indicating which optional
+ * fields to include when assembling POSITION messages.
+ * Longitude, latitude, altitude, speed, heading, and DOP
+ * are always included (also time if GPS-synced)
+ * NOTE: the more fields are included, the larger the message will be -
+ * leading to longer airtime and a higher risk of packet loss
+ */
+ enum PositionFlags {
+ /*
+ * Required for compilation
+ */
+ UNSET = 0x0000;
+
+ /*
+ * Include an altitude value (if available)
+ */
+ ALTITUDE = 0x0001;
+
+ /*
+ * Altitude value is MSL
+ */
+ ALTITUDE_MSL = 0x0002;
+
+ /*
+ * Include geoidal separation
+ */
+ GEOIDAL_SEPARATION = 0x0004;
+
+ /*
+ * Include the DOP value ; PDOP used by default, see below
+ */
+ DOP = 0x0008;
+
+ /*
+ * If POS_DOP set, send separate HDOP / VDOP values instead of PDOP
+ */
+ HVDOP = 0x0010;
+
+ /*
+ * Include number of "satellites in view"
+ */
+ SATINVIEW = 0x0020;
+
+ /*
+ * Include a sequence number incremented per packet
+ */
+ SEQ_NO = 0x0040;
+
+ /*
+ * Include positional timestamp (from GPS solution)
+ */
+ TIMESTAMP = 0x0080;
+
+ /*
+ * Include positional heading
+ * Intended for use with vehicle not walking speeds
+ * walking speeds are likely to be error prone like the compass
+ */
+ HEADING = 0x0100;
+
+ /*
+ * Include positional speed
+ * Intended for use with vehicle not walking speeds
+ * walking speeds are likely to be error prone like the compass
+ */
+ SPEED = 0x0200;
+ }
+
+ enum GpsMode {
+ /*
+ * GPS is present but disabled
+ */
+ DISABLED = 0;
+
+ /*
+ * GPS is present and enabled
+ */
+ ENABLED = 1;
+
+ /*
+ * GPS is not present on the device
+ */
+ NOT_PRESENT = 2;
+ }
+
+ /*
+ * We should send our position this often (but only if it has changed significantly)
+ * Defaults to 15 minutes
+ */
+ uint32 position_broadcast_secs = 1;
+
+ /*
+ * Adaptive position braoadcast, which is now the default.
+ */
+ bool position_broadcast_smart_enabled = 2;
+
+ /*
+ * If set, this node is at a fixed position.
+ * We will generate GPS position updates at the regular interval, but use whatever the last lat/lon/alt we have for the node.
+ * The lat/lon/alt can be set by an internal GPS or with the help of the app.
+ */
+ bool fixed_position = 3;
+
+ /*
+ * Is GPS enabled for this node?
+ */
+ bool gps_enabled = 4[deprecated = true];
+
+ /*
+ * How often should we try to get GPS position (in seconds)
+ * or zero for the default of once every 30 seconds
+ * or a very large value (maxint) to update only once at boot.
+ */
+ uint32 gps_update_interval = 5;
+
+ /*
+ * Deprecated in favor of using smart / regular broadcast intervals as implicit attempt time
+ */
+ uint32 gps_attempt_time = 6 [deprecated = true];
+
+ /*
+ * Bit field of boolean configuration options for POSITION messages
+ * (bitwise OR of PositionFlags)
+ */
+ uint32 position_flags = 7;
+
+ /*
+ * (Re)define GPS_RX_PIN for your board.
+ */
+ uint32 rx_gpio = 8;
+
+ /*
+ * (Re)define GPS_TX_PIN for your board.
+ */
+ uint32 tx_gpio = 9;
+
+ /*
+ * The minimum distance in meters traveled (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled
+ */
+ uint32 broadcast_smart_minimum_distance = 10;
+
+ /*
+ * The minimum number of seconds (since the last send) before we can send a position to the mesh if position_broadcast_smart_enabled
+ */
+ uint32 broadcast_smart_minimum_interval_secs = 11;
+
+ /*
+ * (Re)define PIN_GPS_EN for your board.
+ */
+ uint32 gps_en_gpio = 12;
+
+ /*
+ * Set where GPS is enabled, disabled, or not present
+ */
+ GpsMode gps_mode = 13;
+ }
+
+ /*
+ * Power Config\
+ * See [Power Config](/docs/settings/config/power) for additional power config details.
+ */
+ message PowerConfig {
+ /*
+ * If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in
+ * we should try to minimize power consumption as much as possible.
+ * YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case).
+ * Advanced Option
+ */
+ bool is_power_saving = 1;
+
+ /*
+ * If non-zero, the device will fully power off this many seconds after external power is removed.
+ */
+ uint32 on_battery_shutdown_after_secs = 2;
+
+ /*
+ * Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k)
+ * Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation.
+ * Should be set to floating point value between 2 and 4
+ * Fixes issues on Heltec v2
+ */
+ float adc_multiplier_override = 3;
+
+ /*
+ * Wait Bluetooth Seconds
+ * The number of seconds for to wait before turning off BLE in No Bluetooth states
+ * 0 for default of 1 minute
+ */
+ uint32 wait_bluetooth_secs = 4;
+
+ /*
+ * Super Deep Sleep Seconds
+ * While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep
+ * for this value (default 1 year) or a button press
+ * 0 for default of one year
+ */
+ uint32 sds_secs = 6;
+
+ /*
+ * Light Sleep Seconds
+ * In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on
+ * ESP32 Only
+ * 0 for default of 300
+ */
+ uint32 ls_secs = 7;
+
+ /*
+ * Minimum Wake Seconds
+ * While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value
+ * 0 for default of 10 seconds
+ */
+ uint32 min_wake_secs = 8;
+
+ /*
+ * I2C address of INA_2XX to use for reading device battery voltage
+ */
+ uint32 device_battery_ina_address = 9;
+ }
+
+ /*
+ * Network Config
+ */
+ message NetworkConfig {
+ enum AddressMode {
+ /*
+ * obtain ip address via DHCP
+ */
+ DHCP = 0;
+
+ /*
+ * use static ip address
+ */
+ STATIC = 1;
+ }
+
+ message IpV4Config {
+ /*
+ * Static IP address
+ */
+ fixed32 ip = 1;
+
+ /*
+ * Static gateway address
+ */
+ fixed32 gateway = 2;
+
+ /*
+ * Static subnet mask
+ */
+ fixed32 subnet = 3;
+
+ /*
+ * Static DNS server address
+ */
+ fixed32 dns = 4;
+ }
+
+ /*
+ * Enable WiFi (disables Bluetooth)
+ */
+ bool wifi_enabled = 1;
+
+ /*
+ * If set, this node will try to join the specified wifi network and
+ * acquire an address via DHCP
+ */
+ string wifi_ssid = 3;
+
+ /*
+ * If set, will be use to authenticate to the named wifi
+ */
+ string wifi_psk = 4;
+
+ /*
+ * NTP server to use if WiFi is conneced, defaults to `0.pool.ntp.org`
+ */
+ string ntp_server = 5;
+
+ /*
+ * Enable Ethernet
+ */
+ bool eth_enabled = 6;
+
+ /*
+ * acquire an address via DHCP or assign static
+ */
+ AddressMode address_mode = 7;
+
+ /*
+ * struct to keep static address
+ */
+ IpV4Config ipv4_config = 8;
+
+ /*
+ * rsyslog Server and Port
+ */
+ string rsyslog_server = 9;
+ }
+
+ /*
+ * Display Config
+ */
+ message DisplayConfig {
+ /*
+ * How the GPS coordinates are displayed on the OLED screen.
+ */
+ enum GpsCoordinateFormat {
+ /*
+ * GPS coordinates are displayed in the normal decimal degrees format:
+ * DD.DDDDDD DDD.DDDDDD
+ */
+ DEC = 0;
+
+ /*
+ * GPS coordinates are displayed in the degrees minutes seconds format:
+ * DD°MM'SS"C DDD°MM'SS"C, where C is the compass point representing the locations quadrant
+ */
+ DMS = 1;
+
+ /*
+ * Universal Transverse Mercator format:
+ * ZZB EEEEEE NNNNNNN, where Z is zone, B is band, E is easting, N is northing
+ */
+ UTM = 2;
+
+ /*
+ * Military Grid Reference System format:
+ * ZZB CD EEEEE NNNNN, where Z is zone, B is band, C is the east 100k square, D is the north 100k square,
+ * E is easting, N is northing
+ */
+ MGRS = 3;
+
+ /*
+ * Open Location Code (aka Plus Codes).
+ */
+ OLC = 4;
+
+ /*
+ * Ordnance Survey Grid Reference (the National Grid System of the UK).
+ * Format: AB EEEEE NNNNN, where A is the east 100k square, B is the north 100k square,
+ * E is the easting, N is the northing
+ */
+ OSGR = 5;
+ }
+
+ /*
+ * Unit display preference
+ */
+ enum DisplayUnits {
+ /*
+ * Metric (Default)
+ */
+ METRIC = 0;
+
+ /*
+ * Imperial
+ */
+ IMPERIAL = 1;
+ }
+
+ /*
+ * Override OLED outo detect with this if it fails.
+ */
+ enum OledType {
+ /*
+ * Default / Auto
+ */
+ OLED_AUTO = 0;
+
+ /*
+ * Default / Auto
+ */
+ OLED_SSD1306 = 1;
+
+ /*
+ * Default / Auto
+ */
+ OLED_SH1106 = 2;
+
+ /*
+ * Can not be auto detected but set by proto. Used for 128x128 screens
+ */
+ OLED_SH1107 = 3;
+ }
+
+ /*
+ * Number of seconds the screen stays on after pressing the user button or receiving a message
+ * 0 for default of one minute MAXUINT for always on
+ */
+ uint32 screen_on_secs = 1;
+
+ /*
+ * How the GPS coordinates are formatted on the OLED screen.
+ */
+ GpsCoordinateFormat gps_format = 2;
+
+ /*
+ * Automatically toggles to the next page on the screen like a carousel, based the specified interval in seconds.
+ * Potentially useful for devices without user buttons.
+ */
+ uint32 auto_screen_carousel_secs = 3;
+
+ /*
+ * If this is set, the displayed compass will always point north. if unset, the old behaviour
+ * (top of display is heading direction) is used.
+ */
+ bool compass_north_top = 4;
+
+ /*
+ * Flip screen vertically, for cases that mount the screen upside down
+ */
+ bool flip_screen = 5;
+
+ /*
+ * Perferred display units
+ */
+ DisplayUnits units = 6;
+
+ /*
+ * Override auto-detect in screen
+ */
+ OledType oled = 7;
+
+ enum DisplayMode {
+ /*
+ * Default. The old style for the 128x64 OLED screen
+ */
+ DEFAULT = 0;
+
+ /*
+ * Rearrange display elements to cater for bicolor OLED displays
+ */
+ TWOCOLOR = 1;
+
+ /*
+ * Same as TwoColor, but with inverted top bar. Not so good for Epaper displays
+ */
+ INVERTED = 2;
+
+ /*
+ * TFT Full Color Displays (not implemented yet)
+ */
+ COLOR = 3;
+ }
+ /*
+ * Display Mode
+ */
+ DisplayMode displaymode = 8;
+
+ /*
+ * Print first line in pseudo-bold? FALSE is original style, TRUE is bold
+ */
+ bool heading_bold = 9;
+
+ /*
+ * Should we wake the screen up on accelerometer detected motion or tap
+ */
+ bool wake_on_tap_or_motion = 10;
+ }
+
+ /*
+ * Lora Config
+ */
+ message LoRaConfig {
+ enum RegionCode {
+ /*
+ * Region is not set
+ */
+ UNSET = 0;
+
+ /*
+ * United States
+ */
+ US = 1;
+
+ /*
+ * European Union 433mhz
+ */
+ EU_433 = 2;
+
+ /*
+ * European Union 868mhz
+ */
+ EU_868 = 3;
+
+ /*
+ * China
+ */
+ CN = 4;
+
+ /*
+ * Japan
+ */
+ JP = 5;
+
+ /*
+ * Australia / New Zealand
+ */
+ ANZ = 6;
+
+ /*
+ * Korea
+ */
+ KR = 7;
+
+ /*
+ * Taiwan
+ */
+ TW = 8;
+
+ /*
+ * Russia
+ */
+ RU = 9;
+
+ /*
+ * India
+ */
+ IN = 10;
+
+ /*
+ * New Zealand 865mhz
+ */
+ NZ_865 = 11;
+
+ /*
+ * Thailand
+ */
+ TH = 12;
+
+ /*
+ * WLAN Band
+ */
+ LORA_24 = 13;
+
+ /*
+ * Ukraine 433mhz
+ */
+ UA_433 = 14;
+
+ /*
+ * Ukraine 868mhz
+ */
+ UA_868 = 15;
+
+ /*
+ * Malaysia 433mhz
+ */
+ MY_433 = 16;
+
+ /*
+ * Malaysia 919mhz
+ */
+ MY_919 = 17;
+
+ /*
+ * Singapore 923mhz
+ */
+ SG_923 = 18;
+ }
+
+ /*
+ * Standard predefined channel settings
+ * Note: these mappings must match ModemPreset Choice in the device code.
+ */
+ enum ModemPreset {
+ /*
+ * Long Range - Fast
+ */
+ LONG_FAST = 0;
+
+ /*
+ * Long Range - Slow
+ */
+ LONG_SLOW = 1;
+
+ /*
+ * Very Long Range - Slow
+ */
+ VERY_LONG_SLOW = 2;
+
+ /*
+ * Medium Range - Slow
+ */
+ MEDIUM_SLOW = 3;
+
+ /*
+ * Medium Range - Fast
+ */
+ MEDIUM_FAST = 4;
+
+ /*
+ * Short Range - Slow
+ */
+ SHORT_SLOW = 5;
+
+ /*
+ * Short Range - Fast
+ */
+ SHORT_FAST = 6;
+
+ /*
+ * Long Range - Moderately Fast
+ */
+ LONG_MODERATE = 7;
+ }
+
+ /*
+ * When enabled, the `modem_preset` fields will be adhered to, else the `bandwidth`/`spread_factor`/`coding_rate`
+ * will be taked from their respective manually defined fields
+ */
+ bool use_preset = 1;
+
+ /*
+ * Either modem_config or bandwidth/spreading/coding will be specified - NOT BOTH.
+ * As a heuristic: If bandwidth is specified, do not use modem_config.
+ * Because protobufs take ZERO space when the value is zero this works out nicely.
+ * This value is replaced by bandwidth/spread_factor/coding_rate.
+ * If you'd like to experiment with other options add them to MeshRadio.cpp in the device code.
+ */
+ ModemPreset modem_preset = 2;
+
+ /*
+ * Bandwidth in MHz
+ * Certain bandwidth numbers are 'special' and will be converted to the
+ * appropriate floating point value: 31 -> 31.25MHz
+ */
+ uint32 bandwidth = 3;
+
+ /*
+ * A number from 7 to 12.
+ * Indicates number of chirps per symbol as 1< 7 results in the default
+ */
+ uint32 hop_limit = 8;
+
+ /*
+ * Disable TX from the LoRa radio. Useful for hot-swapping antennas and other tests.
+ * Defaults to false
+ */
+ bool tx_enabled = 9;
+
+ /*
+ * If zero, then use default max legal continuous power (ie. something that won't
+ * burn out the radio hardware)
+ * In most cases you should use zero here.
+ * Units are in dBm.
+ */
+ int32 tx_power = 10;
+
+ /*
+ * This controls the actual hardware frequency the radio transmits on.
+ * Most users should never need to be exposed to this field/concept.
+ * A channel number between 1 and NUM_CHANNELS (whatever the max is in the current region).
+ * If ZERO then the rule is "use the old channel name hash based
+ * algorithm to derive the channel number")
+ * If using the hash algorithm the channel number will be: hash(channel_name) %
+ * NUM_CHANNELS (Where num channels depends on the regulatory region).
+ */
+ uint32 channel_num = 11;
+
+ /*
+ * If true, duty cycle limits will be exceeded and thus you're possibly not following
+ * the local regulations if you're not a HAM.
+ * Has no effect if the duty cycle of the used region is 100%.
+ */
+ bool override_duty_cycle = 12;
+
+ /*
+ * If true, sets RX boosted gain mode on SX126X based radios
+ */
+ bool sx126x_rx_boosted_gain = 13;
+
+ /*
+ * This parameter is for advanced users and licensed HAM radio operators.
+ * Ignore Channel Calculation and use this frequency instead. The frequency_offset
+ * will still be applied. This will allow you to use out-of-band frequencies.
+ * Please respect your local laws and regulations. If you are a HAM, make sure you
+ * enable HAM mode and turn off encryption.
+ */
+ float override_frequency = 14;
+
+ /*
+ * For testing it is useful sometimes to force a node to never listen to
+ * particular other nodes (simulating radio out of range). All nodenums listed
+ * in ignore_incoming will have packets they send dropped on receive (by router.cpp)
+ */
+ repeated uint32 ignore_incoming = 103;
+
+ /*
+ * If true, the device will not process any packets received via LoRa that passed via MQTT anywhere on the path towards it.
+ */
+ bool ignore_mqtt = 104;
+ }
+
+ message BluetoothConfig {
+ enum PairingMode {
+ /*
+ * Device generates a random PIN that will be shown on the screen of the device for pairing
+ */
+ RANDOM_PIN = 0;
+
+ /*
+ * Device requires a specified fixed PIN for pairing
+ */
+ FIXED_PIN = 1;
+
+ /*
+ * Device requires no PIN for pairing
+ */
+ NO_PIN = 2;
+ }
+
+ /*
+ * Enable Bluetooth on the device
+ */
+ bool enabled = 1;
+
+ /*
+ * Determines the pairing strategy for the device
+ */
+ PairingMode mode = 2;
+
+ /*
+ * Specified PIN for PairingMode.FixedPin
+ */
+ uint32 fixed_pin = 3;
+ }
+
+ /*
+ * Payload Variant
+ */
+ oneof payload_variant {
+ DeviceConfig device = 1;
+ PositionConfig position = 2;
+ PowerConfig power = 3;
+ NetworkConfig network = 4;
+ DisplayConfig display = 5;
+ LoRaConfig lora = 6;
+ BluetoothConfig bluetooth = 7;
+ }
+}
diff --git a/src/protos/meshtastic/connection_status.options b/src/protos/meshtastic/connection_status.options
new file mode 100644
index 0000000..d4901dd
--- /dev/null
+++ b/src/protos/meshtastic/connection_status.options
@@ -0,0 +1 @@
+*WifiConnectionStatus.ssid max_size:33
diff --git a/src/protos/meshtastic/connection_status.proto b/src/protos/meshtastic/connection_status.proto
new file mode 100644
index 0000000..7551596
--- /dev/null
+++ b/src/protos/meshtastic/connection_status.proto
@@ -0,0 +1,120 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ConnStatusProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+message DeviceConnectionStatus {
+ /*
+ * WiFi Status
+ */
+ optional WifiConnectionStatus wifi = 1;
+ /*
+ * WiFi Status
+ */
+ optional EthernetConnectionStatus ethernet = 2;
+
+ /*
+ * Bluetooth Status
+ */
+ optional BluetoothConnectionStatus bluetooth = 3;
+
+ /*
+ * Serial Status
+ */
+ optional SerialConnectionStatus serial = 4;
+}
+
+/*
+ * WiFi connection status
+ */
+message WifiConnectionStatus {
+ /*
+ * Connection status
+ */
+ NetworkConnectionStatus status = 1;
+
+ /*
+ * WiFi access point SSID
+ */
+ string ssid = 2;
+
+ /*
+ * RSSI of wireless connection
+ */
+ int32 rssi = 3;
+}
+
+/*
+ * Ethernet connection status
+ */
+message EthernetConnectionStatus {
+ /*
+ * Connection status
+ */
+ NetworkConnectionStatus status = 1;
+}
+
+/*
+ * Ethernet or WiFi connection status
+ */
+message NetworkConnectionStatus {
+ /*
+ * IP address of device
+ */
+ fixed32 ip_address = 1;
+
+ /*
+ * Whether the device has an active connection or not
+ */
+ bool is_connected = 2;
+
+ /*
+ * Whether the device has an active connection to an MQTT broker or not
+ */
+ bool is_mqtt_connected = 3;
+
+ /*
+ * Whether the device is actively remote syslogging or not
+ */
+ bool is_syslog_connected = 4;
+}
+
+/*
+ * Bluetooth connection status
+ */
+message BluetoothConnectionStatus {
+ /*
+ * The pairing PIN for bluetooth
+ */
+ uint32 pin = 1;
+
+ /*
+ * RSSI of bluetooth connection
+ */
+ int32 rssi = 2;
+
+ /*
+ * Whether the device has an active connection or not
+ */
+ bool is_connected = 3;
+}
+
+/*
+ * Serial connection status
+ */
+message SerialConnectionStatus {
+ /*
+ * Serial baud rate
+ */
+ uint32 baud = 1;
+
+ /*
+ * Whether the device has an active connection or not
+ */
+ bool is_connected = 2;
+}
diff --git a/src/protos/meshtastic/deviceonly.options b/src/protos/meshtastic/deviceonly.options
new file mode 100644
index 0000000..d870ace
--- /dev/null
+++ b/src/protos/meshtastic/deviceonly.options
@@ -0,0 +1,19 @@
+# options for nanopb
+# https://jpa.kapsi.fi/nanopb/docs/reference.html#proto-file-options
+
+# FIXME pick a higher number someday? or do dynamic alloc in nanopb?
+*DeviceState.node_db_lite max_count:100
+
+# FIXME - max_count is actually 32 but we save/load this as one long string of preencoded MeshPacket bytes - not a big array in RAM
+*DeviceState.receive_queue max_count:1
+
+*ChannelFile.channels max_count:8
+
+*OEMStore.oem_text max_size:40
+*OEMStore.oem_icon_bits max_size:2048
+*OEMStore.oem_aes_key max_size:32
+
+*DeviceState.node_remote_hardware_pins max_count:12
+
+*NodeInfoLite.channel int_size:8
+*NodeInfoLite.hops_away int_size:8
\ No newline at end of file
diff --git a/src/protos/meshtastic/deviceonly.proto b/src/protos/meshtastic/deviceonly.proto
new file mode 100644
index 0000000..169df1c
--- /dev/null
+++ b/src/protos/meshtastic/deviceonly.proto
@@ -0,0 +1,262 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/channel.proto";
+import "meshtastic/localonly.proto";
+import "meshtastic/mesh.proto";
+import "meshtastic/telemetry.proto";
+import "meshtastic/module_config.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "DeviceOnly";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This message is never sent over the wire, but it is used for serializing DB
+ * state to flash in the device code
+ * FIXME, since we write this each time we enter deep sleep (and have infinite
+ * flash) it would be better to use some sort of append only data structure for
+ * the receive queue and use the preferences store for the other stuff
+ */
+message DeviceState {
+ /*
+ * Read only settings/info about this node
+ */
+ MyNodeInfo my_node = 2;
+
+ /*
+ * My owner info
+ */
+ User owner = 3;
+
+ /*
+ * Received packets saved for delivery to the phone
+ */
+ repeated MeshPacket receive_queue = 5;
+
+ /*
+ * A version integer used to invalidate old save files when we make
+ * incompatible changes This integer is set at build time and is private to
+ * NodeDB.cpp in the device code.
+ */
+ uint32 version = 8;
+
+ /*
+ * We keep the last received text message (only) stored in the device flash,
+ * so we can show it on the screen.
+ * Might be null
+ */
+ MeshPacket rx_text_message = 7;
+
+ /*
+ * Used only during development.
+ * Indicates developer is testing and changes should never be saved to flash.
+ */
+ bool no_save = 9;
+
+ /*
+ * Some GPS receivers seem to have bogus settings from the factory, so we always do one factory reset.
+ */
+ bool did_gps_reset = 11;
+
+ /*
+ * We keep the last received waypoint stored in the device flash,
+ * so we can show it on the screen.
+ * Might be null
+ */
+ MeshPacket rx_waypoint = 12;
+
+ /*
+ * The mesh's nodes with their available gpio pins for RemoteHardware module
+ */
+ repeated NodeRemoteHardwarePin node_remote_hardware_pins = 13;
+
+ /*
+ * New lite version of NodeDB to decrease memory footprint
+ */
+ repeated NodeInfoLite node_db_lite = 14;
+}
+
+message NodeInfoLite {
+ /*
+ * The node number
+ */
+ uint32 num = 1;
+
+ /*
+ * The user info for this node
+ */
+ User user = 2;
+
+ /*
+ * This position data. Note: before 1.2.14 we would also store the last time we've heard from this node in position.time, that is no longer true.
+ * Position.time now indicates the last time we received a POSITION from that node.
+ */
+ PositionLite position = 3;
+
+ /*
+ * Returns the Signal-to-noise ratio (SNR) of the last received message,
+ * as measured by the receiver. Return SNR of the last received message in dB
+ */
+ float snr = 4;
+
+ /*
+ * Set to indicate the last time we received a packet from this node
+ */
+ fixed32 last_heard = 5;
+ /*
+ * The latest device metrics for the node.
+ */
+ DeviceMetrics device_metrics = 6;
+
+ /*
+ * local channel index we heard that node on. Only populated if its not the default channel.
+ */
+ uint32 channel = 7;
+
+ /*
+ * True if we witnessed the node over MQTT instead of LoRA transport
+ */
+ bool via_mqtt = 8;
+
+ /*
+ * Number of hops away from us this node is (0 if adjacent)
+ */
+ uint32 hops_away = 9;
+}
+
+/*
+ * Position with static location information only for NodeDBLite
+ */
+message PositionLite {
+ /*
+ * The new preferred location encoding, multiply by 1e-7 to get degrees
+ * in floating point
+ */
+ sfixed32 latitude_i = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ sfixed32 longitude_i = 2;
+
+ /*
+ * In meters above MSL (but see issue #359)
+ */
+ int32 altitude = 3;
+
+ /*
+ * This is usually not sent over the mesh (to save space), but it is sent
+ * from the phone so that the local device can set its RTC If it is sent over
+ * the mesh (because there are devices on the mesh without GPS), it will only
+ * be sent by devices which has a hardware GPS clock.
+ * seconds since 1970
+ */
+ fixed32 time = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ Position.LocSource location_source = 5;
+}
+
+/*
+ * The on-disk saved channels
+ */
+message ChannelFile {
+ /*
+ * The channels our node knows about
+ */
+ repeated Channel channels = 1;
+
+ /*
+ * A version integer used to invalidate old save files when we make
+ * incompatible changes This integer is set at build time and is private to
+ * NodeDB.cpp in the device code.
+ */
+ uint32 version = 2;
+}
+
+/*
+ * TODO: REPLACE
+ */
+enum ScreenFonts {
+ /*
+ * TODO: REPLACE
+ */
+ FONT_SMALL = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ FONT_MEDIUM = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ FONT_LARGE = 2;
+}
+
+/*
+ * This can be used for customizing the firmware distribution. If populated,
+ * show a secondary bootup screen with custom logo and text for 2.5 seconds.
+ */
+message OEMStore {
+ /*
+ * The Logo width in Px
+ */
+ uint32 oem_icon_width = 1;
+
+ /*
+ * The Logo height in Px
+ */
+ uint32 oem_icon_height = 2;
+
+ /*
+ * The Logo in XBM bytechar format
+ */
+ bytes oem_icon_bits = 3;
+
+ /*
+ * Use this font for the OEM text.
+ */
+ ScreenFonts oem_font = 4;
+
+ /*
+ * Use this font for the OEM text.
+ */
+ string oem_text = 5;
+
+ /*
+ * The default device encryption key, 16 or 32 byte
+ */
+ bytes oem_aes_key = 6;
+
+ /*
+ * A Preset LocalConfig to apply during factory reset
+ */
+ LocalConfig oem_local_config = 7;
+
+ /*
+ * A Preset LocalModuleConfig to apply during factory reset
+ */
+ LocalModuleConfig oem_local_module_config = 8;
+}
+
+/*
+ * RemoteHardwarePins associated with a node
+ */
+message NodeRemoteHardwarePin {
+ /*
+ * The node_num exposing the available gpio pin
+ */
+ uint32 node_num = 1;
+
+ /*
+ * The the available gpio pin for usage with RemoteHardware module
+ */
+ RemoteHardwarePin pin = 2;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/localonly.proto b/src/protos/meshtastic/localonly.proto
new file mode 100644
index 0000000..9297dff
--- /dev/null
+++ b/src/protos/meshtastic/localonly.proto
@@ -0,0 +1,135 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/config.proto";
+import "meshtastic/module_config.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "LocalOnlyProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * Protobuf structures common to apponly.proto and deviceonly.proto
+ * This is never sent over the wire, only for local use
+ */
+
+message LocalConfig {
+ /*
+ * The part of the config that is specific to the Device
+ */
+ Config.DeviceConfig device = 1;
+
+ /*
+ * The part of the config that is specific to the GPS Position
+ */
+ Config.PositionConfig position = 2;
+
+ /*
+ * The part of the config that is specific to the Power settings
+ */
+ Config.PowerConfig power = 3;
+
+ /*
+ * The part of the config that is specific to the Wifi Settings
+ */
+ Config.NetworkConfig network = 4;
+
+ /*
+ * The part of the config that is specific to the Display
+ */
+ Config.DisplayConfig display = 5;
+
+ /*
+ * The part of the config that is specific to the Lora Radio
+ */
+ Config.LoRaConfig lora = 6;
+
+ /*
+ * The part of the config that is specific to the Bluetooth settings
+ */
+ Config.BluetoothConfig bluetooth = 7;
+
+ /*
+ * A version integer used to invalidate old save files when we make
+ * incompatible changes This integer is set at build time and is private to
+ * NodeDB.cpp in the device code.
+ */
+ uint32 version = 8;
+}
+
+message LocalModuleConfig {
+ /*
+ * The part of the config that is specific to the MQTT module
+ */
+ ModuleConfig.MQTTConfig mqtt = 1;
+
+ /*
+ * The part of the config that is specific to the Serial module
+ */
+ ModuleConfig.SerialConfig serial = 2;
+
+ /*
+ * The part of the config that is specific to the ExternalNotification module
+ */
+ ModuleConfig.ExternalNotificationConfig external_notification = 3;
+
+ /*
+ * The part of the config that is specific to the Store & Forward module
+ */
+ ModuleConfig.StoreForwardConfig store_forward = 4;
+
+ /*
+ * The part of the config that is specific to the RangeTest module
+ */
+ ModuleConfig.RangeTestConfig range_test = 5;
+
+ /*
+ * The part of the config that is specific to the Telemetry module
+ */
+ ModuleConfig.TelemetryConfig telemetry = 6;
+
+ /*
+ * The part of the config that is specific to the Canned Message module
+ */
+ ModuleConfig.CannedMessageConfig canned_message = 7;
+
+ /*
+ * The part of the config that is specific to the Audio module
+ */
+ ModuleConfig.AudioConfig audio = 9;
+
+ /*
+ * The part of the config that is specific to the Remote Hardware module
+ */
+ ModuleConfig.RemoteHardwareConfig remote_hardware = 10;
+
+ /*
+ * The part of the config that is specific to the Neighbor Info module
+ */
+ ModuleConfig.NeighborInfoConfig neighbor_info = 11;
+
+ /*
+ * The part of the config that is specific to the Ambient Lighting module
+ */
+ ModuleConfig.AmbientLightingConfig ambient_lighting = 12;
+
+ /*
+ * The part of the config that is specific to the Detection Sensor module
+ */
+ ModuleConfig.DetectionSensorConfig detection_sensor = 13;
+
+ /*
+ * Paxcounter Config
+ */
+ ModuleConfig.PaxcounterConfig paxcounter = 14;
+
+ /*
+ * A version integer used to invalidate old save files when we make
+ * incompatible changes This integer is set at build time and is private to
+ * NodeDB.cpp in the device code.
+ */
+ uint32 version = 8;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/mesh.options b/src/protos/meshtastic/mesh.options
new file mode 100644
index 0000000..aedfe99
--- /dev/null
+++ b/src/protos/meshtastic/mesh.options
@@ -0,0 +1,61 @@
+# options for nanopb
+# https://jpa.kapsi.fi/nanopb/docs/reference.html#proto-file-options
+
+*macaddr max_size:6 fixed_length:true # macaddrs
+*id max_size:16 # node id strings
+
+*User.long_name max_size:40
+*User.short_name max_size:5
+
+*RouteDiscovery.route max_count:8
+
+# note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
+# outside of this envelope
+*Data.payload max_size:237
+
+*NodeInfo.channel int_size:8
+*NodeInfo.hops_away int_size:8
+
+# Big enough for 1.2.28.568032c-d
+*MyNodeInfo.firmware_version max_size:18
+
+*MyNodeInfo.air_period_tx max_count:8
+*MyNodeInfo.air_period_rx max_count:8
+
+# Note: the actual limit (because of header bytes) on the size of encrypted payloads is 251 bytes, but I use 256
+# here because we might need to fill with zeros for padding to encryption block size (16 bytes per block)
+*MeshPacket.encrypted max_size:256
+*MeshPacket.payload_variant anonymous_oneof:true
+*MeshPacket.hop_limit int_size:8
+*MeshPacket.hop_start int_size:8
+*MeshPacket.channel int_size:8
+
+*QueueStatus.res int_size:8
+*QueueStatus.free int_size:8
+*QueueStatus.maxlen int_size:8
+
+*ToRadio.payload_variant anonymous_oneof:true
+
+*FromRadio.payload_variant anonymous_oneof:true
+
+*Routing.variant anonymous_oneof:true
+
+*LogRecord.message max_size:64
+*LogRecord.source max_size:8
+
+# MyMessage.name max_size:40
+# or fixed_length or fixed_count, or max_count
+
+#This value may want to be a few bytes smaller to compensate for the parent fields.
+*Compressed.data max_size:237
+
+*Waypoint.name max_size:30
+*Waypoint.description max_size:100
+
+*NeighborInfo.neighbors max_count:10
+
+*DeviceMetadata.firmware_version max_size:18
+
+*MqttClientProxyMessage.topic max_size:60
+*MqttClientProxyMessage.data max_size:435
+*MqttClientProxyMessage.text max_size:435
diff --git a/src/protos/meshtastic/mesh.proto b/src/protos/meshtastic/mesh.proto
new file mode 100644
index 0000000..76aa01b
--- /dev/null
+++ b/src/protos/meshtastic/mesh.proto
@@ -0,0 +1,1564 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/channel.proto";
+import "meshtastic/config.proto";
+import "meshtastic/module_config.proto";
+import "meshtastic/portnums.proto";
+import "meshtastic/telemetry.proto";
+import "meshtastic/xmodem.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "MeshProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * a gps position
+ */
+message Position {
+ /*
+ * The new preferred location encoding, multiply by 1e-7 to get degrees
+ * in floating point
+ */
+ sfixed32 latitude_i = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ sfixed32 longitude_i = 2;
+
+ /*
+ * In meters above MSL (but see issue #359)
+ */
+ int32 altitude = 3;
+
+ /*
+ * This is usually not sent over the mesh (to save space), but it is sent
+ * from the phone so that the local device can set its time if it is sent over
+ * the mesh (because there are devices on the mesh without GPS or RTC).
+ * seconds since 1970
+ */
+ fixed32 time = 4;
+
+ /*
+ * How the location was acquired: manual, onboard GPS, external (EUD) GPS
+ */
+ enum LocSource {
+ /*
+ * TODO: REPLACE
+ */
+ LOC_UNSET = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ LOC_MANUAL = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ LOC_INTERNAL = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ LOC_EXTERNAL = 3;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ LocSource location_source = 5;
+
+ /*
+ * How the altitude was acquired: manual, GPS int/ext, etc
+ * Default: same as location_source if present
+ */
+ enum AltSource {
+ /*
+ * TODO: REPLACE
+ */
+ ALT_UNSET = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ ALT_MANUAL = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ ALT_INTERNAL = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ ALT_EXTERNAL = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ ALT_BAROMETRIC = 4;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ AltSource altitude_source = 6;
+
+ /*
+ * Positional timestamp (actual timestamp of GPS solution) in integer epoch seconds
+ */
+ fixed32 timestamp = 7;
+
+ /*
+ * Pos. timestamp milliseconds adjustment (rarely available or required)
+ */
+ int32 timestamp_millis_adjust = 8;
+
+ /*
+ * HAE altitude in meters - can be used instead of MSL altitude
+ */
+ sint32 altitude_hae = 9;
+
+ /*
+ * Geoidal separation in meters
+ */
+ sint32 altitude_geoidal_separation = 10;
+
+ /*
+ * Horizontal, Vertical and Position Dilution of Precision, in 1/100 units
+ * - PDOP is sufficient for most cases
+ * - for higher precision scenarios, HDOP and VDOP can be used instead,
+ * in which case PDOP becomes redundant (PDOP=sqrt(HDOP^2 + VDOP^2))
+ * TODO: REMOVE/INTEGRATE
+ */
+ uint32 PDOP = 11;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 HDOP = 12;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 VDOP = 13;
+
+ /*
+ * GPS accuracy (a hardware specific constant) in mm
+ * multiplied with DOP to calculate positional accuracy
+ * Default: "'bout three meters-ish" :)
+ */
+ uint32 gps_accuracy = 14;
+
+ /*
+ * Ground speed in m/s and True North TRACK in 1/100 degrees
+ * Clarification of terms:
+ * - "track" is the direction of motion (measured in horizontal plane)
+ * - "heading" is where the fuselage points (measured in horizontal plane)
+ * - "yaw" indicates a relative rotation about the vertical axis
+ * TODO: REMOVE/INTEGRATE
+ */
+ uint32 ground_speed = 15;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 ground_track = 16;
+
+ /*
+ * GPS fix quality (from NMEA GxGGA statement or similar)
+ */
+ uint32 fix_quality = 17;
+
+ /*
+ * GPS fix type 2D/3D (from NMEA GxGSA statement)
+ */
+ uint32 fix_type = 18;
+
+ /*
+ * GPS "Satellites in View" number
+ */
+ uint32 sats_in_view = 19;
+
+ /*
+ * Sensor ID - in case multiple positioning sensors are being used
+ */
+ uint32 sensor_id = 20;
+
+ /*
+ * Estimated/expected time (in seconds) until next update:
+ * - if we update at fixed intervals of X seconds, use X
+ * - if we update at dynamic intervals (based on relative movement etc),
+ * but "AT LEAST every Y seconds", use Y
+ */
+ uint32 next_update = 21;
+
+ /*
+ * A sequence number, incremented with each Position message to help
+ * detect lost updates if needed
+ */
+ uint32 seq_number = 22;
+
+ /*
+ * Indicates the bits of precision set by the sending node
+ */
+ uint32 precision_bits = 23;
+}
+
+/*
+ * Note: these enum names must EXACTLY match the string used in the device
+ * bin/build-all.sh script.
+ * Because they will be used to find firmware filenames in the android app for OTA updates.
+ * To match the old style filenames, _ is converted to -, p is converted to .
+ */
+enum HardwareModel {
+ /*
+ * TODO: REPLACE
+ */
+ UNSET = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_V2 = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_V1 = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_V2_1_1P6 = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ TBEAM = 4;
+
+ /*
+ * The original heltec WiFi_Lora_32_V2, which had battery voltage sensing hooked to GPIO 13
+ * (see HELTEC_V2 for the new version).
+ */
+ HELTEC_V2_0 = 5;
+
+ /*
+ * TODO: REPLACE
+ */
+ TBEAM_V0P7 = 6;
+
+ /*
+ * TODO: REPLACE
+ */
+ T_ECHO = 7;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_V1_1P3 = 8;
+
+ /*
+ * TODO: REPLACE
+ */
+ RAK4631 = 9;
+
+ /*
+ * The new version of the heltec WiFi_Lora_32_V2 board that has battery sensing hooked to GPIO 37.
+ * Sadly they did not update anything on the silkscreen to identify this board
+ */
+ HELTEC_V2_1 = 10;
+
+ /*
+ * Ancient heltec WiFi_Lora_32 board
+ */
+ HELTEC_V1 = 11;
+
+ /*
+ * New T-BEAM with ESP32-S3 CPU
+ */
+ LILYGO_TBEAM_S3_CORE = 12;
+
+ /*
+ * RAK WisBlock ESP32 core: https://docs.rakwireless.com/Product-Categories/WisBlock/RAK11200/Overview/
+ */
+ RAK11200 = 13;
+
+ /*
+ * B&Q Consulting Nano Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:nano
+ */
+ NANO_G1 = 14;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_V2_1_1P8 = 15;
+
+ /*
+ * TODO: REPLACE
+ */
+ TLORA_T3_S3 = 16;
+
+ /*
+ * B&Q Consulting Nano G1 Explorer: https://wiki.uniteng.com/en/meshtastic/nano-g1-explorer
+ */
+ NANO_G1_EXPLORER = 17;
+
+ /*
+ * B&Q Consulting Nano G2 Ultra: https://wiki.uniteng.com/en/meshtastic/nano-g2-ultra
+ */
+ NANO_G2_ULTRA = 18;
+
+ /*
+ * LoRAType device: https://loratype.org/
+ */
+ LORA_TYPE = 19;
+
+ /*
+ * B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station
+ */
+ STATION_G1 = 25;
+
+ /*
+ * RAK11310 (RP2040 + SX1262)
+ */
+ RAK11310 = 26;
+
+ /*
+ * Makerfabs SenseLoRA Receiver (RP2040 + RFM96)
+ */
+ SENSELORA_RP2040 = 27;
+
+ /*
+ * Makerfabs SenseLoRA Industrial Monitor (ESP32-S3 + RFM96)
+ */
+ SENSELORA_S3 = 28;
+
+ /*
+ * Canary Radio Company - CanaryOne: https://canaryradio.io/products/canaryone
+ */
+ CANARYONE = 29;
+
+ /*
+ * Waveshare RP2040 LoRa - https://www.waveshare.com/rp2040-lora.htm
+ */
+ RP2040_LORA = 30;
+
+ /*
+ * B&Q Consulting Station G2: https://wiki.uniteng.com/en/meshtastic/station-g2
+ */
+ STATION_G2 = 31;
+
+ /*
+ * ---------------------------------------------------------------------------
+ * Less common/prototype boards listed here (needs one more byte over the air)
+ * ---------------------------------------------------------------------------
+ */
+ LORA_RELAY_V1 = 32;
+
+ /*
+ * TODO: REPLACE
+ */
+ NRF52840DK = 33;
+
+ /*
+ * TODO: REPLACE
+ */
+ PPR = 34;
+
+ /*
+ * TODO: REPLACE
+ */
+ GENIEBLOCKS = 35;
+
+ /*
+ * TODO: REPLACE
+ */
+ NRF52_UNKNOWN = 36;
+
+ /*
+ * TODO: REPLACE
+ */
+ PORTDUINO = 37;
+
+ /*
+ * The simulator built into the android app
+ */
+ ANDROID_SIM = 38;
+
+ /*
+ * Custom DIY device based on @NanoVHF schematics: https://github.com/NanoVHF/Meshtastic-DIY/tree/main/Schematics
+ */
+ DIY_V1 = 39;
+
+ /*
+ * nRF52840 Dongle : https://www.nordicsemi.com/Products/Development-hardware/nrf52840-dongle/
+ */
+ NRF52840_PCA10059 = 40;
+
+ /*
+ * Custom Disaster Radio esp32 v3 device https://github.com/sudomesh/disaster-radio/tree/master/hardware/board_esp32_v3
+ */
+ DR_DEV = 41;
+
+ /*
+ * M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/
+ */
+ M5STACK = 42;
+
+ /*
+ * New Heltec LoRA32 with ESP32-S3 CPU
+ */
+ HELTEC_V3 = 43;
+
+ /*
+ * New Heltec Wireless Stick Lite with ESP32-S3 CPU
+ */
+ HELTEC_WSL_V3 = 44;
+
+ /*
+ * New BETAFPV ELRS Micro TX Module 2.4G with ESP32 CPU
+ */
+ BETAFPV_2400_TX = 45;
+
+ /*
+ * BetaFPV ExpressLRS "Nano" TX Module 900MHz with ESP32 CPU
+ */
+ BETAFPV_900_NANO_TX = 46;
+
+ /*
+ * Raspberry Pi Pico (W) with Waveshare SX1262 LoRa Node Module
+ */
+ RPI_PICO = 47;
+
+ /*
+ * Heltec Wireless Tracker with ESP32-S3 CPU, built-in GPS, and TFT
+ * Newer V1.1, version is written on the PCB near the display.
+ */
+ HELTEC_WIRELESS_TRACKER = 48;
+
+ /*
+ * Heltec Wireless Paper with ESP32-S3 CPU and E-Ink display
+ */
+ HELTEC_WIRELESS_PAPER = 49;
+
+ /*
+ * LilyGo T-Deck with ESP32-S3 CPU, Keyboard and IPS display
+ */
+ T_DECK = 50;
+
+ /*
+ * LilyGo T-Watch S3 with ESP32-S3 CPU and IPS display
+ */
+ T_WATCH_S3 = 51;
+
+ /*
+ * Bobricius Picomputer with ESP32-S3 CPU, Keyboard and IPS display
+ */
+ PICOMPUTER_S3 = 52;
+
+ /*
+ * Heltec HT-CT62 with ESP32-C3 CPU and SX1262 LoRa
+ */
+ HELTEC_HT62 = 53;
+
+ /*
+ * EBYTE SPI LoRa module and ESP32-S3
+ */
+ EBYTE_ESP32_S3 = 54;
+
+ /*
+ * Waveshare ESP32-S3-PICO with PICO LoRa HAT and 2.9inch e-Ink
+ */
+ ESP32_S3_PICO = 55;
+
+ /*
+ * CircuitMess Chatter 2 LLCC68 Lora Module and ESP32 Wroom
+ * Lora module can be swapped out for a Heltec RA-62 which is "almost" pin compatible
+ * with one cut and one jumper Meshtastic works
+ */
+ CHATTER_2 = 56;
+
+ /*
+ * Heltec Wireless Paper, With ESP32-S3 CPU and E-Ink display
+ * Older "V1.0" Variant, has no "version sticker"
+ * E-Ink model is DEPG0213BNS800
+ * Tab on the screen protector is RED
+ * Flex connector marking is FPC-7528B
+ */
+ HELTEC_WIRELESS_PAPER_V1_0 = 57;
+
+ /*
+ * Heltec Wireless Tracker with ESP32-S3 CPU, built-in GPS, and TFT
+ * Older "V1.0" Variant
+ */
+ HELTEC_WIRELESS_TRACKER_V1_0 = 58;
+
+ /*
+ * ------------------------------------------------------------------------------------------------------------------------------------------
+ * Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
+ * ------------------------------------------------------------------------------------------------------------------------------------------
+ */
+ PRIVATE_HW = 255;
+}
+
+/*
+ * Broadcast when a newly powered mesh node wants to find a node num it can use
+ * Sent from the phone over bluetooth to set the user id for the owner of this node.
+ * Also sent from nodes to each other when a new node signs on (so all clients can have this info)
+ * The algorithm is as follows:
+ * when a node starts up, it broadcasts their user and the normal flow is for all
+ * other nodes to reply with their User as well (so the new node can build its nodedb)
+ * If a node ever receives a User (not just the first broadcast) message where
+ * the sender node number equals our node number, that indicates a collision has
+ * occurred and the following steps should happen:
+ * If the receiving node (that was already in the mesh)'s macaddr is LOWER than the
+ * new User who just tried to sign in: it gets to keep its nodenum.
+ * We send a broadcast message of OUR User (we use a broadcast so that the other node can
+ * receive our message, considering we have the same id - it also serves to let
+ * observers correct their nodedb) - this case is rare so it should be okay.
+ * If any node receives a User where the macaddr is GTE than their local macaddr,
+ * they have been vetoed and should pick a new random nodenum (filtering against
+ * whatever it knows about the nodedb) and rebroadcast their User.
+ * A few nodenums are reserved and will never be requested:
+ * 0xff - broadcast
+ * 0 through 3 - for future use
+ */
+message User {
+ /*
+ * A globally unique ID string for this user.
+ * In the case of Signal that would mean +16504442323, for the default macaddr derived id it would be !<8 hexidecimal bytes>.
+ * Note: app developers are encouraged to also use the following standard
+ * node IDs "^all" (for broadcast), "^local" (for the locally connected node)
+ */
+ string id = 1;
+
+ /*
+ * A full name for this user, i.e. "Kevin Hester"
+ */
+ string long_name = 2;
+
+ /*
+ * A VERY short name, ideally two characters.
+ * Suitable for a tiny OLED screen
+ */
+ string short_name = 3;
+
+ /*
+ * Deprecated in Meshtastic 2.1.x
+ * This is the addr of the radio.
+ * Not populated by the phone, but added by the esp32 when broadcasting
+ */
+ bytes macaddr = 4 [deprecated = true];
+
+ /*
+ * TBEAM, HELTEC, etc...
+ * Starting in 1.2.11 moved to hw_model enum in the NodeInfo object.
+ * Apps will still need the string here for older builds
+ * (so OTA update can find the right image), but if the enum is available it will be used instead.
+ */
+ HardwareModel hw_model = 5;
+
+ /*
+ * In some regions Ham radio operators have different bandwidth limitations than others.
+ * If this user is a licensed operator, set this flag.
+ * Also, "long_name" should be their licence number.
+ */
+ bool is_licensed = 6;
+
+ /*
+ * Indicates that the user's role in the mesh
+ */
+ Config.DeviceConfig.Role role = 7;
+}
+
+/*
+ * A message used in our Dynamic Source Routing protocol (RFC 4728 based)
+ */
+message RouteDiscovery {
+ /*
+ * The list of nodenums this packet has visited so far
+ */
+ repeated fixed32 route = 1;
+}
+
+/*
+ * A Routing control Data packet handled by the routing module
+ */
+message Routing {
+ /*
+ * A failure in delivering a message (usually used for routing control messages, but might be provided in addition to ack.fail_id to provide
+ * details on the type of failure).
+ */
+ enum Error {
+ /*
+ * This message is not a failure
+ */
+ NONE = 0;
+
+ /*
+ * Our node doesn't have a route to the requested destination anymore.
+ */
+ NO_ROUTE = 1;
+
+ /*
+ * We received a nak while trying to forward on your behalf
+ */
+ GOT_NAK = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ TIMEOUT = 3;
+
+ /*
+ * No suitable interface could be found for delivering this packet
+ */
+ NO_INTERFACE = 4;
+
+ /*
+ * We reached the max retransmission count (typically for naive flood routing)
+ */
+ MAX_RETRANSMIT = 5;
+
+ /*
+ * No suitable channel was found for sending this packet (i.e. was requested channel index disabled?)
+ */
+ NO_CHANNEL = 6;
+
+ /*
+ * The packet was too big for sending (exceeds interface MTU after encoding)
+ */
+ TOO_LARGE = 7;
+
+ /*
+ * The request had want_response set, the request reached the destination node, but no service on that node wants to send a response
+ * (possibly due to bad channel permissions)
+ */
+ NO_RESPONSE = 8;
+
+ /*
+ * Cannot send currently because duty cycle regulations will be violated.
+ */
+ DUTY_CYCLE_LIMIT = 9;
+
+ /*
+ * The application layer service on the remote node received your request, but considered your request somehow invalid
+ */
+ BAD_REQUEST = 32;
+
+ /*
+ * The application layer service on the remote node received your request, but considered your request not authorized
+ * (i.e you did not send the request on the required bound channel)
+ */
+ NOT_AUTHORIZED = 33;
+ }
+
+ oneof variant {
+ /*
+ * A route request going from the requester
+ */
+ RouteDiscovery route_request = 1;
+
+ /*
+ * A route reply
+ */
+ RouteDiscovery route_reply = 2;
+
+ /*
+ * A failure in delivering a message (usually used for routing control messages, but might be provided
+ * in addition to ack.fail_id to provide details on the type of failure).
+ */
+ Error error_reason = 3;
+ }
+}
+
+/*
+ * (Formerly called SubPacket)
+ * The payload portion fo a packet, this is the actual bytes that are sent
+ * inside a radio packet (because from/to are broken out by the comms library)
+ */
+message Data {
+ /*
+ * Formerly named typ and of type Type
+ */
+ PortNum portnum = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ bytes payload = 2;
+
+ /*
+ * Not normally used, but for testing a sender can request that recipient
+ * responds in kind (i.e. if it received a position, it should unicast back it's position).
+ * Note: that if you set this on a broadcast you will receive many replies.
+ */
+ bool want_response = 3;
+
+ /*
+ * The address of the destination node.
+ * This field is is filled in by the mesh radio device software, application
+ * layer software should never need it.
+ * RouteDiscovery messages _must_ populate this.
+ * Other message types might need to if they are doing multihop routing.
+ */
+ fixed32 dest = 4;
+
+ /*
+ * The address of the original sender for this message.
+ * This field should _only_ be populated for reliable multihop packets (to keep
+ * packets small).
+ */
+ fixed32 source = 5;
+
+ /*
+ * Only used in routing or response messages.
+ * Indicates the original message ID that this message is reporting failure on. (formerly called original_id)
+ */
+ fixed32 request_id = 6;
+
+ /*
+ * If set, this message is intened to be a reply to a previously sent message with the defined id.
+ */
+ fixed32 reply_id = 7;
+
+ /*
+ * Defaults to false. If true, then what is in the payload should be treated as an emoji like giving
+ * a message a heart or poop emoji.
+ */
+ fixed32 emoji = 8;
+}
+
+/*
+ * Waypoint message, used to share arbitrary locations across the mesh
+ */
+message Waypoint {
+ /*
+ * Id of the waypoint
+ */
+ uint32 id = 1;
+
+ /*
+ * latitude_i
+ */
+ sfixed32 latitude_i = 2;
+
+ /*
+ * longitude_i
+ */
+ sfixed32 longitude_i = 3;
+
+ /*
+ * Time the waypoint is to expire (epoch)
+ */
+ uint32 expire = 4;
+
+ /*
+ * If greater than zero, treat the value as a nodenum only allowing them to update the waypoint.
+ * If zero, the waypoint is open to be edited by any member of the mesh.
+ */
+ uint32 locked_to = 5;
+
+ /*
+ * Name of the waypoint - max 30 chars
+ */
+ string name = 6;
+
+ /*
+ * Description of the waypoint - max 100 chars
+ */
+ string description = 7;
+
+ /*
+ * Designator icon for the waypoint in the form of a unicode emoji
+ */
+ fixed32 icon = 8;
+}
+
+/*
+ * This message will be proxied over the PhoneAPI for the client to deliver to the MQTT server
+ */
+ message MqttClientProxyMessage {
+ /*
+ * The MQTT topic this message will be sent /received on
+ */
+ string topic = 1;
+
+ /*
+ * The actual service envelope payload or text for mqtt pub / sub
+ */
+ oneof payload_variant {
+ /*
+ * Bytes
+ */
+ bytes data = 2;
+
+ /*
+ * Text
+ */
+ string text = 3;
+ }
+
+ /*
+ * Whether the message should be retained (or not)
+ */
+ bool retained = 4;
+}
+
+/*
+ * A packet envelope sent/received over the mesh
+ * only payload_variant is sent in the payload portion of the LORA packet.
+ * The other fields are either not sent at all, or sent in the special 16 byte LORA header.
+ */
+message MeshPacket {
+ /*
+ * The priority of this message for sending.
+ * Higher priorities are sent first (when managing the transmit queue).
+ * This field is never sent over the air, it is only used internally inside of a local device node.
+ * API clients (either on the local node or connected directly to the node)
+ * can set this parameter if necessary.
+ * (values must be <= 127 to keep protobuf field to one byte in size.
+ * Detailed background on this field:
+ * I noticed a funny side effect of lora being so slow: Usually when making
+ * a protocol there isn’t much need to use message priority to change the order
+ * of transmission (because interfaces are fairly fast).
+ * But for lora where packets can take a few seconds each, it is very important
+ * to make sure that critical packets are sent ASAP.
+ * In the case of meshtastic that means we want to send protocol acks as soon as possible
+ * (to prevent unneeded retransmissions), we want routing messages to be sent next,
+ * then messages marked as reliable and finally 'background' packets like periodic position updates.
+ * So I bit the bullet and implemented a new (internal - not sent over the air)
+ * field in MeshPacket called 'priority'.
+ * And the transmission queue in the router object is now a priority queue.
+ */
+ enum Priority {
+ /*
+ * Treated as Priority.DEFAULT
+ */
+ UNSET = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ MIN = 1;
+
+ /*
+ * Background position updates are sent with very low priority -
+ * if the link is super congested they might not go out at all
+ */
+ BACKGROUND = 10;
+
+ /*
+ * This priority is used for most messages that don't have a priority set
+ */
+ DEFAULT = 64;
+
+ /*
+ * If priority is unset but the message is marked as want_ack,
+ * assume it is important and use a slightly higher priority
+ */
+ RELIABLE = 70;
+
+ /*
+ * Ack/naks are sent with very high priority to ensure that retransmission
+ * stops as soon as possible
+ */
+ ACK = 120;
+
+ /*
+ * TODO: REPLACE
+ */
+ MAX = 127;
+ }
+
+ /*
+ * Identify if this is a delayed packet
+ */
+ enum Delayed {
+ /*
+ * If unset, the message is being sent in real time.
+ */
+ NO_DELAY = 0;
+
+ /*
+ * The message is delayed and was originally a broadcast
+ */
+ DELAYED_BROADCAST = 1;
+
+ /*
+ * The message is delayed and was originally a direct message
+ */
+ DELAYED_DIRECT = 2;
+ }
+
+ /*
+ * The sending node number.
+ * Note: Our crypto implementation uses this field as well.
+ * See [crypto](/docs/overview/encryption) for details.
+ */
+ fixed32 from = 1;
+
+ /*
+ * The (immediate) destination for this packet
+ */
+ fixed32 to = 2;
+
+ /*
+ * (Usually) If set, this indicates the index in the secondary_channels table that this packet was sent/received on.
+ * If unset, packet was on the primary channel.
+ * A particular node might know only a subset of channels in use on the mesh.
+ * Therefore channel_index is inherently a local concept and meaningless to send between nodes.
+ * Very briefly, while sending and receiving deep inside the device Router code, this field instead
+ * contains the 'channel hash' instead of the index.
+ * This 'trick' is only used while the payload_variant is an 'encrypted'.
+ */
+ uint32 channel = 3;
+
+ /*
+ * Internally to the mesh radios we will route SubPackets encrypted per [this](docs/developers/firmware/encryption).
+ * However, when a particular node has the correct
+ * key to decode a particular packet, it will decode the payload into a SubPacket protobuf structure.
+ * Software outside of the device nodes will never encounter a packet where
+ * "decoded" is not populated (i.e. any encryption/decryption happens before reaching the applications)
+ * The numeric IDs for these fields were selected to keep backwards compatibility with old applications.
+ */
+
+ oneof payload_variant {
+ /*
+ * TODO: REPLACE
+ */
+ Data decoded = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ bytes encrypted = 5;
+ }
+
+ /*
+ * A unique ID for this packet.
+ * Always 0 for no-ack packets or non broadcast packets (and therefore take zero bytes of space).
+ * Otherwise a unique ID for this packet, useful for flooding algorithms.
+ * ID only needs to be unique on a _per sender_ basis, and it only
+ * needs to be unique for a few minutes (long enough to last for the length of
+ * any ACK or the completion of a mesh broadcast flood).
+ * Note: Our crypto implementation uses this id as well.
+ * See [crypto](/docs/overview/encryption) for details.
+ */
+ fixed32 id = 6;
+
+ /*
+ * The time this message was received by the esp32 (secs since 1970).
+ * Note: this field is _never_ sent on the radio link itself (to save space) Times
+ * are typically not sent over the mesh, but they will be added to any Packet
+ * (chain of SubPacket) sent to the phone (so the phone can know exact time of reception)
+ */
+ fixed32 rx_time = 7;
+
+ /*
+ * *Never* sent over the radio links.
+ * Set during reception to indicate the SNR of this packet.
+ * Used to collect statistics on current link quality.
+ */
+ float rx_snr = 8;
+
+ /*
+ * If unset treated as zero (no forwarding, send to adjacent nodes only)
+ * if 1, allow hopping through one node, etc...
+ * For our usecase real world topologies probably have a max of about 3.
+ * This field is normally placed into a few of bits in the header.
+ */
+ uint32 hop_limit = 9;
+
+ /*
+ * This packet is being sent as a reliable message, we would prefer it to arrive at the destination.
+ * We would like to receive a ack packet in response.
+ * Broadcasts messages treat this flag specially: Since acks for broadcasts would
+ * rapidly flood the channel, the normal ack behavior is suppressed.
+ * Instead, the original sender listens to see if at least one node is rebroadcasting this packet (because naive flooding algorithm).
+ * If it hears that the odds (given typical LoRa topologies) the odds are very high that every node should eventually receive the message.
+ * So FloodingRouter.cpp generates an implicit ack which is delivered to the original sender.
+ * If after some time we don't hear anyone rebroadcast our packet, we will timeout and retransmit, using the regular resend logic.
+ * Note: This flag is normally sent in a flag bit in the header when sent over the wire
+ */
+ bool want_ack = 10;
+
+ /*
+ * The priority of this message for sending.
+ * See MeshPacket.Priority description for more details.
+ */
+ Priority priority = 11;
+
+ /*
+ * rssi of received packet. Only sent to phone for dispay purposes.
+ */
+ int32 rx_rssi = 12;
+
+ /*
+ * Describe if this message is delayed
+ */
+ Delayed delayed = 13 [deprecated = true];
+
+ /*
+ * Describes whether this packet passed via MQTT somewhere along the path it currently took.
+ */
+ bool via_mqtt = 14;
+
+ /*
+ * Hop limit with which the original packet started. Sent via LoRa using three bits in the unencrypted header.
+ * When receiving a packet, the difference between hop_start and hop_limit gives how many hops it traveled.
+ */
+ uint32 hop_start = 15;
+}
+
+/*
+ * Shared constants between device and phone
+ */
+enum Constants {
+ /*
+ * First enum must be zero, and we are just using this enum to
+ * pass int constants between two very different environments
+ */
+ ZERO = 0;
+
+ /*
+ * From mesh.options
+ * note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is
+ * outside of this envelope
+ */
+ DATA_PAYLOAD_LEN = 237;
+}
+
+/*
+ * The bluetooth to device link:
+ * Old BTLE protocol docs from TODO, merge in above and make real docs...
+ * use protocol buffers, and NanoPB
+ * messages from device to phone:
+ * POSITION_UPDATE (..., time)
+ * TEXT_RECEIVED(from, text, time)
+ * OPAQUE_RECEIVED(from, payload, time) (for signal messages or other applications)
+ * messages from phone to device:
+ * SET_MYID(id, human readable long, human readable short) (send down the unique ID
+ * string used for this node, a human readable string shown for that id, and a very
+ * short human readable string suitable for oled screen) SEND_OPAQUE(dest, payload)
+ * (for signal messages or other applications) SEND_TEXT(dest, text) Get all
+ * nodes() (returns list of nodes, with full info, last time seen, loc, battery
+ * level etc) SET_CONFIG (switches device to a new set of radio params and
+ * preshared key, drops all existing nodes, force our node to rejoin this new group)
+ * Full information about a node on the mesh
+ */
+message NodeInfo {
+ /*
+ * The node number
+ */
+ uint32 num = 1;
+
+ /*
+ * The user info for this node
+ */
+ User user = 2;
+
+ /*
+ * This position data. Note: before 1.2.14 we would also store the last time we've heard from this node in position.time, that is no longer true.
+ * Position.time now indicates the last time we received a POSITION from that node.
+ */
+ Position position = 3;
+
+ /*
+ * Returns the Signal-to-noise ratio (SNR) of the last received message,
+ * as measured by the receiver. Return SNR of the last received message in dB
+ */
+ float snr = 4;
+
+ /*
+ * TODO: REMOVE/INTEGRATE
+ * Returns the last measured frequency error.
+ * The LoRa receiver estimates the frequency offset between the receiver
+ * center frequency and that of the received LoRa signal. This function
+ * returns the estimates offset (in Hz) of the last received message.
+ * Caution: this measurement is not absolute, but is measured relative to the
+ * local receiver's oscillator. Apparent errors may be due to the
+ * transmitter, the receiver or both. \return The estimated center frequency
+ * offset in Hz of the last received message.
+ * int32 frequency_error = 6;
+ * enum RouteState {
+ * Invalid = 0;
+ * Discovering = 1;
+ * Valid = 2;
+ * }
+ * Not needed?
+ * RouteState route = 4;
+ */
+
+ /*
+ * TODO: REMOVE/INTEGRATE
+ * Not currently used (till full DSR deployment?) Our current preferred node node for routing - might be the same as num if
+ * we are adjacent Or zero if we don't yet know a route to this node.
+ * fixed32 next_hop = 5;
+ */
+
+ /*
+ * Set to indicate the last time we received a packet from this node
+ */
+ fixed32 last_heard = 5;
+ /*
+ * The latest device metrics for the node.
+ */
+ DeviceMetrics device_metrics = 6;
+
+ /*
+ * local channel index we heard that node on. Only populated if its not the default channel.
+ */
+ uint32 channel = 7;
+
+ /*
+ * True if we witnessed the node over MQTT instead of LoRA transport
+ */
+ bool via_mqtt = 8;
+
+ /*
+ * Number of hops away from us this node is (0 if adjacent)
+ */
+ uint32 hops_away = 9;
+}
+
+/*
+ * Error codes for critical errors
+ * The device might report these fault codes on the screen.
+ * If you encounter a fault code, please post on the meshtastic.discourse.group
+ * and we'll try to help.
+ */
+enum CriticalErrorCode {
+ /*
+ * TODO: REPLACE
+ */
+ NONE = 0;
+
+ /*
+ * A software bug was detected while trying to send lora
+ */
+ TX_WATCHDOG = 1;
+
+ /*
+ * A software bug was detected on entry to sleep
+ */
+ SLEEP_ENTER_WAIT = 2;
+
+ /*
+ * No Lora radio hardware could be found
+ */
+ NO_RADIO = 3;
+
+ /*
+ * Not normally used
+ */
+ UNSPECIFIED = 4;
+
+ /*
+ * We failed while configuring a UBlox GPS
+ */
+ UBLOX_UNIT_FAILED = 5;
+
+ /*
+ * This board was expected to have a power management chip and it is missing or broken
+ */
+ NO_AXP192 = 6;
+
+ /*
+ * The channel tried to set a radio setting which is not supported by this chipset,
+ * radio comms settings are now undefined.
+ */
+ INVALID_RADIO_SETTING = 7;
+
+ /*
+ * Radio transmit hardware failure. We sent data to the radio chip, but it didn't
+ * reply with an interrupt.
+ */
+ TRANSMIT_FAILED = 8;
+
+ /*
+ * We detected that the main CPU voltage dropped below the minimum acceptable value
+ */
+ BROWNOUT = 9;
+
+ /* Selftest of SX1262 radio chip failed */
+ SX1262_FAILURE = 10;
+
+ /*
+ * A (likely software but possibly hardware) failure was detected while trying to send packets.
+ * If this occurs on your board, please post in the forum so that we can ask you to collect some information to allow fixing this bug
+ */
+ RADIO_SPI_BUG = 11;
+}
+
+/*
+ * Unique local debugging info for this node
+ * Note: we don't include position or the user info, because that will come in the
+ * Sent to the phone in response to WantNodes.
+ */
+message MyNodeInfo {
+ /*
+ * Tells the phone what our node number is, default starting value is
+ * lowbyte of macaddr, but it will be fixed if that is already in use
+ */
+ uint32 my_node_num = 1;
+
+ /*
+ * The total number of reboots this node has ever encountered
+ * (well - since the last time we discarded preferences)
+ */
+ uint32 reboot_count = 8;
+
+ /*
+ * The minimum app version that can talk to this device.
+ * Phone/PC apps should compare this to their build number and if too low tell the user they must update their app
+ */
+ uint32 min_app_version = 11;
+}
+
+/*
+ * Debug output from the device.
+ * To minimize the size of records inside the device code, if a time/source/level is not set
+ * on the message it is assumed to be a continuation of the previously sent message.
+ * This allows the device code to use fixed maxlen 64 byte strings for messages,
+ * and then extend as needed by emitting multiple records.
+ */
+message LogRecord {
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ enum Level {
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ UNSET = 0;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ CRITICAL = 50;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ ERROR = 40;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ WARNING = 30;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ INFO = 20;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ DEBUG = 10;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ TRACE = 5;
+ }
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ string message = 1;
+
+ /*
+ * Seconds since 1970 - or 0 for unknown/unset
+ */
+ fixed32 time = 2;
+
+ /*
+ * Usually based on thread name - if known
+ */
+ string source = 3;
+
+ /*
+ * Not yet set
+ */
+ Level level = 4;
+}
+
+message QueueStatus {
+ /* Last attempt to queue status, ErrorCode */
+ int32 res = 1;
+
+ /* Free entries in the outgoing queue */
+ uint32 free = 2;
+
+ /* Maximum entries in the outgoing queue */
+ uint32 maxlen = 3;
+
+ /* What was mesh packet id that generated this response? */
+ uint32 mesh_packet_id = 4;
+}
+
+/*
+ * Packets from the radio to the phone will appear on the fromRadio characteristic.
+ * It will support READ and NOTIFY. When a new packet arrives the device will BLE notify?
+ * It will sit in that descriptor until consumed by the phone,
+ * at which point the next item in the FIFO will be populated.
+ */
+message FromRadio {
+ /*
+ * The packet id, used to allow the phone to request missing read packets from the FIFO,
+ * see our bluetooth docs
+ */
+ uint32 id = 1;
+
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ oneof payload_variant {
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ MeshPacket packet = 2;
+
+ /*
+ * Tells the phone what our node number is, can be -1 if we've not yet joined a mesh.
+ * NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
+ */
+ MyNodeInfo my_info = 3;
+
+ /*
+ * One packet is sent for each node in the on radio DB
+ * starts over with the first node in our DB
+ */
+ NodeInfo node_info = 4;
+
+ /*
+ * Include a part of the config (was: RadioConfig radio)
+ */
+ Config config = 5;
+
+ /*
+ * Set to send debug console output over our protobuf stream
+ */
+ LogRecord log_record = 6;
+
+ /*
+ * Sent as true once the device has finished sending all of the responses to want_config
+ * recipient should check if this ID matches our original request nonce, if
+ * not, it means your config responses haven't started yet.
+ * NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
+ */
+ uint32 config_complete_id = 7;
+
+ /*
+ * Sent to tell clients the radio has just rebooted.
+ * Set to true if present.
+ * Not used on all transports, currently just used for the serial console.
+ * NOTE: This ID must not change - to keep (minimal) compatibility with <1.2 version of android apps.
+ */
+ bool rebooted = 8;
+
+ /*
+ * Include module config
+ */
+ ModuleConfig moduleConfig = 9;
+
+ /*
+ * One packet is sent for each channel
+ */
+ Channel channel = 10;
+
+ /*
+ * Queue status info
+ */
+ QueueStatus queueStatus = 11;
+
+ /*
+ * File Transfer Chunk
+ */
+ XModem xmodemPacket = 12;
+
+ /*
+ * Device metadata message
+ */
+ DeviceMetadata metadata = 13;
+
+ /*
+ * MQTT Client Proxy Message (device sending to client / phone for publishing to MQTT)
+ */
+ MqttClientProxyMessage mqttClientProxyMessage = 14;
+ }
+}
+
+/*
+ * Packets/commands to the radio will be written (reliably) to the toRadio characteristic.
+ * Once the write completes the phone can assume it is handled.
+ */
+message ToRadio {
+ /*
+ * Log levels, chosen to match python logging conventions.
+ */
+ oneof payload_variant {
+ /*
+ * Send this packet on the mesh
+ */
+ MeshPacket packet = 1;
+
+ /*
+ * Phone wants radio to send full node db to the phone, This is
+ * typically the first packet sent to the radio when the phone gets a
+ * bluetooth connection. The radio will respond by sending back a
+ * MyNodeInfo, a owner, a radio config and a series of
+ * FromRadio.node_infos, and config_complete
+ * the integer you write into this field will be reported back in the
+ * config_complete_id response this allows clients to never be confused by
+ * a stale old partially sent config.
+ */
+ uint32 want_config_id = 3;
+
+ /*
+ * Tell API server we are disconnecting now.
+ * This is useful for serial links where there is no hardware/protocol based notification that the client has dropped the link.
+ * (Sending this message is optional for clients)
+ */
+ bool disconnect = 4;
+
+ /*
+ * File Transfer Chunk
+ */
+
+ XModem xmodemPacket = 5;
+
+ /*
+ * MQTT Client Proxy Message (for client / phone subscribed to MQTT sending to device)
+ */
+ MqttClientProxyMessage mqttClientProxyMessage = 6;
+ }
+}
+
+/*
+ * Compressed message payload
+ */
+message Compressed {
+ /*
+ * PortNum to determine the how to handle the compressed payload.
+ */
+ PortNum portnum = 1;
+
+ /*
+ * Compressed data.
+ */
+ bytes data = 2;
+}
+
+/*
+ * Full info on edges for a single node
+ */
+message NeighborInfo {
+ /*
+ * The node ID of the node sending info on its neighbors
+ */
+ uint32 node_id = 1;
+ /*
+ * Field to pass neighbor info for the next sending cycle
+ */
+ uint32 last_sent_by_id = 2;
+
+ /*
+ * Broadcast interval of the represented node (in seconds)
+ */
+ uint32 node_broadcast_interval_secs = 3;
+ /*
+ * The list of out edges from this node
+ */
+ repeated Neighbor neighbors = 4;
+}
+
+/*
+ * A single edge in the mesh
+ */
+message Neighbor {
+ /*
+ * Node ID of neighbor
+ */
+ uint32 node_id = 1;
+
+ /*
+ * SNR of last heard message
+ */
+ float snr = 2;
+
+ /*
+ * Reception time (in secs since 1970) of last message that was last sent by this ID.
+ * Note: this is for local storage only and will not be sent out over the mesh.
+ */
+ fixed32 last_rx_time = 3;
+
+ /*
+ * Broadcast interval of this neighbor (in seconds).
+ * Note: this is for local storage only and will not be sent out over the mesh.
+ */
+ uint32 node_broadcast_interval_secs = 4;
+}
+
+/*
+ * Device metadata response
+ */
+message DeviceMetadata {
+ /*
+ * Device firmware version string
+ */
+ string firmware_version = 1;
+
+ /*
+ * Device state version
+ */
+ uint32 device_state_version = 2;
+
+ /*
+ * Indicates whether the device can shutdown CPU natively or via power management chip
+ */
+ bool canShutdown = 3;
+
+ /*
+ * Indicates that the device has native wifi capability
+ */
+ bool hasWifi = 4;
+
+ /*
+ * Indicates that the device has native bluetooth capability
+ */
+ bool hasBluetooth = 5;
+
+ /*
+ * Indicates that the device has an ethernet peripheral
+ */
+ bool hasEthernet = 6;
+
+ /*
+ * Indicates that the device's role in the mesh
+ */
+ Config.DeviceConfig.Role role = 7;
+
+ /*
+ * Indicates the device's current enabled position flags
+ */
+ uint32 position_flags = 8;
+
+ /*
+ * Device hardware model
+ */
+ HardwareModel hw_model = 9;
+
+ /*
+ * Has Remote Hardware enabled
+ */
+ bool hasRemoteHardware = 10;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/module_config.options b/src/protos/meshtastic/module_config.options
new file mode 100644
index 0000000..fdc46d5
--- /dev/null
+++ b/src/protos/meshtastic/module_config.options
@@ -0,0 +1,28 @@
+*CannedMessageConfig.allow_input_source max_size:16
+
+*MQTTConfig.address max_size:64
+*MQTTConfig.username max_size:64
+*MQTTConfig.password max_size:64
+*MQTTConfig.root max_size:16
+
+*AudioConfig.ptt_pin int_size:8
+*AudioConfig.i2s_ws int_size:8
+*AudioConfig.i2s_sd int_size:8
+*AudioConfig.i2s_din int_size:8
+*AudioConfig.i2s_sck int_size:8
+
+*ExternalNotificationConfig.output_vibra int_size:8
+*ExternalNotificationConfig.output_buzzer int_size:8
+*ExternalNotificationConfig.nag_timeout int_size:16
+
+*RemoteHardwareConfig.available_pins max_count:4
+*RemoteHardwarePin.name max_size:15
+*RemoteHardwarePin.gpio_pin int_size:8
+
+*AmbientLightingConfig.current int_size:8
+*AmbientLightingConfig.red int_size:8
+*AmbientLightingConfig.green int_size:8
+*AmbientLightingConfig.blue int_size:8
+
+*DetectionSensorConfig.monitor_pin int_size:8
+*DetectionSensorConfig.name max_size:20
\ No newline at end of file
diff --git a/src/protos/meshtastic/module_config.proto b/src/protos/meshtastic/module_config.proto
new file mode 100644
index 0000000..f2c2805
--- /dev/null
+++ b/src/protos/meshtastic/module_config.proto
@@ -0,0 +1,801 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "ModuleConfigProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * Module Config
+ */
+message ModuleConfig {
+ /*
+ * MQTT Client Config
+ */
+ message MQTTConfig {
+ /*
+ * If a meshtastic node is able to reach the internet it will normally attempt to gateway any channels that are marked as
+ * is_uplink_enabled or is_downlink_enabled.
+ */
+ bool enabled = 1;
+
+ /*
+ * The server to use for our MQTT global message gateway feature.
+ * If not set, the default server will be used
+ */
+ string address = 2;
+
+ /*
+ * MQTT username to use (most useful for a custom MQTT server).
+ * If using a custom server, this will be honoured even if empty.
+ * If using the default server, this will only be honoured if set, otherwise the device will use the default username
+ */
+ string username = 3;
+
+ /*
+ * MQTT password to use (most useful for a custom MQTT server).
+ * If using a custom server, this will be honoured even if empty.
+ * If using the default server, this will only be honoured if set, otherwise the device will use the default password
+ */
+ string password = 4;
+
+ /*
+ * Whether to send encrypted or decrypted packets to MQTT.
+ * This parameter is only honoured if you also set server
+ * (the default official mqtt.meshtastic.org server can handle encrypted packets)
+ * Decrypted packets may be useful for external systems that want to consume meshtastic packets
+ */
+ bool encryption_enabled = 5;
+
+ /*
+ * Whether to send / consume json packets on MQTT
+ */
+ bool json_enabled = 6;
+
+ /*
+ * If true, we attempt to establish a secure connection using TLS
+ */
+ bool tls_enabled = 7;
+
+ /*
+ * The root topic to use for MQTT messages. Default is "msh".
+ * This is useful if you want to use a single MQTT server for multiple meshtastic networks and separate them via ACLs
+ */
+ string root = 8;
+
+ /*
+ * If true, we can use the connected phone / client to proxy messages to MQTT instead of a direct connection
+ */
+ bool proxy_to_client_enabled = 9;
+
+ /*
+ * If true, we will periodically report unencrypted information about our node to a map via MQTT
+ */
+ bool map_reporting_enabled = 10;
+
+ /*
+ * Settings for reporting information about our node to a map via MQTT
+ */
+ MapReportSettings map_report_settings = 11;
+ }
+
+ /*
+ * Settings for reporting unencrypted information about our node to a map via MQTT
+ */
+ message MapReportSettings {
+ /*
+ * How often we should report our info to the map (in seconds)
+ */
+ uint32 publish_interval_secs = 1;
+
+ /*
+ * Bits of precision for the location sent (default of 32 is full precision).
+ */
+ uint32 position_precision = 2;
+ }
+
+ /*
+ * RemoteHardwareModule Config
+ */
+ message RemoteHardwareConfig {
+ /*
+ * Whether the Module is enabled
+ */
+ bool enabled = 1;
+
+ /*
+ * Whether the Module allows consumers to read / write to pins not defined in available_pins
+ */
+ bool allow_undefined_pin_access = 2;
+
+ /*
+ * Exposes the available pins to the mesh for reading and writing
+ */
+ repeated RemoteHardwarePin available_pins = 3;
+ }
+
+ /*
+ * NeighborInfoModule Config
+ */
+ message NeighborInfoConfig {
+ /*
+ * Whether the Module is enabled
+ */
+ bool enabled = 1;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * Neighbor Info to the mesh
+ */
+ uint32 update_interval = 2;
+ }
+
+ /*
+ * Detection Sensor Module Config
+ */
+ message DetectionSensorConfig {
+ /*
+ * Whether the Module is enabled
+ */
+ bool enabled = 1;
+
+ /*
+ * Interval in seconds of how often we can send a message to the mesh when a state change is detected
+ */
+ uint32 minimum_broadcast_secs = 2;
+
+ /*
+ * Interval in seconds of how often we should send a message to the mesh with the current state regardless of changes
+ * When set to 0, only state changes will be broadcasted
+ * Works as a sort of status heartbeat for peace of mind
+ */
+ uint32 state_broadcast_secs = 3;
+ /*
+ * Send ASCII bell with alert message
+ * Useful for triggering ext. notification on bell
+ */
+ bool send_bell = 4;
+
+ /*
+ * Friendly name used to format message sent to mesh
+ * Example: A name "Motion" would result in a message "Motion detected"
+ * Maximum length of 20 characters
+ */
+ string name = 5;
+
+ /*
+ * GPIO pin to monitor for state changes
+ */
+ uint32 monitor_pin = 6;
+
+ /*
+ * Whether or not the GPIO pin state detection is triggered on HIGH (1)
+ * Otherwise LOW (0)
+ */
+ bool detection_triggered_high = 7;
+
+ /*
+ * Whether or not use INPUT_PULLUP mode for GPIO pin
+ * Only applicable if the board uses pull-up resistors on the pin
+ */
+ bool use_pullup = 8;
+ }
+
+ /*
+ * Audio Config for codec2 voice
+ */
+ message AudioConfig {
+ /*
+ * Baudrate for codec2 voice
+ */
+ enum Audio_Baud {
+ CODEC2_DEFAULT = 0;
+ CODEC2_3200 = 1;
+ CODEC2_2400 = 2;
+ CODEC2_1600 = 3;
+ CODEC2_1400 = 4;
+ CODEC2_1300 = 5;
+ CODEC2_1200 = 6;
+ CODEC2_700 = 7;
+ CODEC2_700B = 8;
+ }
+
+ /*
+ * Whether Audio is enabled
+ */
+ bool codec2_enabled = 1;
+
+ /*
+ * PTT Pin
+ */
+ uint32 ptt_pin = 2;
+
+ /*
+ * The audio sample rate to use for codec2
+ */
+ Audio_Baud bitrate = 3;
+
+ /*
+ * I2S Word Select
+ */
+ uint32 i2s_ws = 4;
+
+ /*
+ * I2S Data IN
+ */
+ uint32 i2s_sd = 5;
+
+ /*
+ * I2S Data OUT
+ */
+ uint32 i2s_din = 6;
+
+ /*
+ * I2S Clock
+ */
+ uint32 i2s_sck = 7;
+ }
+
+ /*
+ * Config for the Paxcounter Module
+ */
+ message PaxcounterConfig {
+ /*
+ * Enable the Paxcounter Module
+ */
+ bool enabled = 1;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * metrics to the mesh
+ */
+
+ uint32 paxcounter_update_interval = 2;
+ }
+
+ /*
+ * Serial Config
+ */
+ message SerialConfig {
+ /*
+ * TODO: REPLACE
+ */
+ enum Serial_Baud {
+ BAUD_DEFAULT = 0;
+ BAUD_110 = 1;
+ BAUD_300 = 2;
+ BAUD_600 = 3;
+ BAUD_1200 = 4;
+ BAUD_2400 = 5;
+ BAUD_4800 = 6;
+ BAUD_9600 = 7;
+ BAUD_19200 = 8;
+ BAUD_38400 = 9;
+ BAUD_57600 = 10;
+ BAUD_115200 = 11;
+ BAUD_230400 = 12;
+ BAUD_460800 = 13;
+ BAUD_576000 = 14;
+ BAUD_921600 = 15;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ enum Serial_Mode {
+ DEFAULT = 0;
+ SIMPLE = 1;
+ PROTO = 2;
+ TEXTMSG = 3;
+ NMEA = 4;
+ // NMEA messages specifically tailored for CalTopo
+ CALTOPO = 5;
+ }
+
+ /*
+ * Preferences for the SerialModule
+ */
+ bool enabled = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ bool echo = 2;
+
+ /*
+ * RX pin (should match Arduino gpio pin number)
+ */
+ uint32 rxd = 3;
+
+ /*
+ * TX pin (should match Arduino gpio pin number)
+ */
+ uint32 txd = 4;
+
+ /*
+ * Serial baud rate
+ */
+ Serial_Baud baud = 5;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 timeout = 6;
+
+ /*
+ * Mode for serial module operation
+ */
+ Serial_Mode mode = 7;
+
+ /*
+ * Overrides the platform's defacto Serial port instance to use with Serial module config settings
+ * This is currently only usable in output modes like NMEA / CalTopo and may behave strangely or not work at all in other modes
+ * Existing logging over the Serial Console will still be present
+ */
+ bool override_console_serial_port = 8;
+ }
+
+ /*
+ * External Notifications Config
+ */
+ message ExternalNotificationConfig {
+ /*
+ * Enable the ExternalNotificationModule
+ */
+ bool enabled = 1;
+
+ /*
+ * When using in On/Off mode, keep the output on for this many
+ * milliseconds. Default 1000ms (1 second).
+ */
+ uint32 output_ms = 2;
+
+ /*
+ * Define the output pin GPIO setting Defaults to
+ * EXT_NOTIFY_OUT if set for the board.
+ * In standalone devices this pin should drive the LED to match the UI.
+ */
+ uint32 output = 3;
+
+ /*
+ * Optional: Define a secondary output pin for a vibra motor
+ * This is used in standalone devices to match the UI.
+ */
+ uint32 output_vibra = 8;
+
+ /*
+ * Optional: Define a tertiary output pin for an active buzzer
+ * This is used in standalone devices to to match the UI.
+ */
+ uint32 output_buzzer = 9;
+
+ /*
+ * IF this is true, the 'output' Pin will be pulled active high, false
+ * means active low.
+ */
+ bool active = 4;
+
+ /*
+ * True: Alert when a text message arrives (output)
+ */
+ bool alert_message = 5;
+
+ /*
+ * True: Alert when a text message arrives (output_vibra)
+ */
+ bool alert_message_vibra = 10;
+
+ /*
+ * True: Alert when a text message arrives (output_buzzer)
+ */
+ bool alert_message_buzzer = 11;
+
+ /*
+ * True: Alert when the bell character is received (output)
+ */
+ bool alert_bell = 6;
+
+ /*
+ * True: Alert when the bell character is received (output_vibra)
+ */
+ bool alert_bell_vibra = 12;
+
+ /*
+ * True: Alert when the bell character is received (output_buzzer)
+ */
+ bool alert_bell_buzzer = 13;
+
+ /*
+ * use a PWM output instead of a simple on/off output. This will ignore
+ * the 'output', 'output_ms' and 'active' settings and use the
+ * device.buzzer_gpio instead.
+ */
+ bool use_pwm = 7;
+
+ /*
+ * The notification will toggle with 'output_ms' for this time of seconds.
+ * Default is 0 which means don't repeat at all. 60 would mean blink
+ * and/or beep for 60 seconds
+ */
+ uint32 nag_timeout = 14;
+
+ /*
+ * When true, enables devices with native I2S audio output to use the RTTTL over speaker like a buzzer
+ * T-Watch S3 and T-Deck for example have this capability
+ */
+ bool use_i2s_as_buzzer = 15;
+ }
+
+ /*
+ * Store and Forward Module Config
+ */
+ message StoreForwardConfig {
+ /*
+ * Enable the Store and Forward Module
+ */
+ bool enabled = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ bool heartbeat = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 records = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 history_return_max = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ uint32 history_return_window = 5;
+ }
+
+ /*
+ * Preferences for the RangeTestModule
+ */
+ message RangeTestConfig {
+ /*
+ * Enable the Range Test Module
+ */
+ bool enabled = 1;
+
+ /*
+ * Send out range test messages from this node
+ */
+ uint32 sender = 2;
+
+ /*
+ * Bool value indicating that this node should save a RangeTest.csv file.
+ * ESP32 Only
+ */
+ bool save = 3;
+ }
+
+ /*
+ * Configuration for both device and environment metrics
+ */
+ message TelemetryConfig {
+ /*
+ * Interval in seconds of how often we should try to send our
+ * device metrics to the mesh
+ */
+ uint32 device_update_interval = 1;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * environment measurements to the mesh
+ */
+
+ uint32 environment_update_interval = 2;
+
+ /*
+ * Preferences for the Telemetry Module (Environment)
+ * Enable/Disable the telemetry measurement module measurement collection
+ */
+ bool environment_measurement_enabled = 3;
+
+ /*
+ * Enable/Disable the telemetry measurement module on-device display
+ */
+ bool environment_screen_enabled = 4;
+
+ /*
+ * We'll always read the sensor in Celsius, but sometimes we might want to
+ * display the results in Fahrenheit as a "user preference".
+ */
+ bool environment_display_fahrenheit = 5;
+
+ /*
+ * Enable/Disable the air quality metrics
+ */
+ bool air_quality_enabled = 6;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * air quality metrics to the mesh
+ */
+ uint32 air_quality_interval = 7;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * air quality metrics to the mesh
+ */
+ bool power_measurement_enabled = 8;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * air quality metrics to the mesh
+ */
+ uint32 power_update_interval = 9;
+
+ /*
+ * Interval in seconds of how often we should try to send our
+ * air quality metrics to the mesh
+ */
+ bool power_screen_enabled = 10;
+
+
+
+
+
+
+
+
+
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ message CannedMessageConfig {
+ /*
+ * TODO: REPLACE
+ */
+ enum InputEventChar {
+ /*
+ * TODO: REPLACE
+ */
+ NONE = 0;
+
+ /*
+ * TODO: REPLACE
+ */
+ UP = 17;
+
+ /*
+ * TODO: REPLACE
+ */
+ DOWN = 18;
+
+ /*
+ * TODO: REPLACE
+ */
+ LEFT = 19;
+
+ /*
+ * TODO: REPLACE
+ */
+ RIGHT = 20;
+
+ /*
+ * '\n'
+ */
+ SELECT = 10;
+
+ /*
+ * TODO: REPLACE
+ */
+ BACK = 27;
+
+ /*
+ * TODO: REPLACE
+ */
+ CANCEL = 24;
+ }
+
+ /*
+ * Enable the rotary encoder #1. This is a 'dumb' encoder sending pulses on both A and B pins while rotating.
+ */
+ bool rotary1_enabled = 1;
+
+ /*
+ * GPIO pin for rotary encoder A port.
+ */
+ uint32 inputbroker_pin_a = 2;
+
+ /*
+ * GPIO pin for rotary encoder B port.
+ */
+ uint32 inputbroker_pin_b = 3;
+
+ /*
+ * GPIO pin for rotary encoder Press port.
+ */
+ uint32 inputbroker_pin_press = 4;
+
+ /*
+ * Generate input event on CW of this kind.
+ */
+ InputEventChar inputbroker_event_cw = 5;
+
+ /*
+ * Generate input event on CCW of this kind.
+ */
+ InputEventChar inputbroker_event_ccw = 6;
+
+ /*
+ * Generate input event on Press of this kind.
+ */
+ InputEventChar inputbroker_event_press = 7;
+
+ /*
+ * Enable the Up/Down/Select input device. Can be RAK rotary encoder or 3 buttons. Uses the a/b/press definitions from inputbroker.
+ */
+ bool updown1_enabled = 8;
+
+ /*
+ * Enable/disable CannedMessageModule.
+ */
+ bool enabled = 9;
+
+ /*
+ * Input event origin accepted by the canned message module.
+ * Can be e.g. "rotEnc1", "upDownEnc1" or keyword "_any"
+ */
+ string allow_input_source = 10;
+
+ /*
+ * CannedMessageModule also sends a bell character with the messages.
+ * ExternalNotificationModule can benefit from this feature.
+ */
+ bool send_bell = 11;
+ }
+
+ /*
+ Ambient Lighting Module - Settings for control of onboard LEDs to allow users to adjust the brightness levels and respective color levels.
+ Initially created for the RAK14001 RGB LED module.
+ */
+ message AmbientLightingConfig {
+
+ /*
+ * Sets LED to on or off.
+ */
+ bool led_state = 1;
+
+ /*
+ * Sets the current for the LED output. Default is 10.
+ */
+ uint32 current = 2;
+
+ /*
+ * Sets the red LED level. Values are 0-255.
+ */
+ uint32 red = 3;
+
+ /*
+ * Sets the green LED level. Values are 0-255.
+ */
+ uint32 green = 4;
+
+ /*
+ * Sets the blue LED level. Values are 0-255.
+ */
+ uint32 blue = 5;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ oneof payload_variant {
+ /*
+ * TODO: REPLACE
+ */
+ MQTTConfig mqtt = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ SerialConfig serial = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ ExternalNotificationConfig external_notification = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ StoreForwardConfig store_forward = 4;
+
+ /*
+ * TODO: REPLACE
+ */
+ RangeTestConfig range_test = 5;
+
+ /*
+ * TODO: REPLACE
+ */
+ TelemetryConfig telemetry = 6;
+
+ /*
+ * TODO: REPLACE
+ */
+ CannedMessageConfig canned_message = 7;
+
+ /*
+ * TODO: REPLACE
+ */
+ AudioConfig audio = 8;
+
+ /*
+ * TODO: REPLACE
+ */
+ RemoteHardwareConfig remote_hardware = 9;
+
+ /*
+ * TODO: REPLACE
+ */
+ NeighborInfoConfig neighbor_info = 10;
+
+ /*
+ * TODO: REPLACE
+ */
+ AmbientLightingConfig ambient_lighting = 11;
+
+ /*
+ * TODO: REPLACE
+ */
+ DetectionSensorConfig detection_sensor = 12;
+
+ /*
+ * TODO: REPLACE
+ */
+ PaxcounterConfig paxcounter = 13;
+ }
+}
+
+/*
+ * A GPIO pin definition for remote hardware module
+ */
+message RemoteHardwarePin {
+ /*
+ * GPIO Pin number (must match Arduino)
+ */
+ uint32 gpio_pin = 1;
+
+ /*
+ * Name for the GPIO pin (i.e. Front gate, mailbox, etc)
+ */
+ string name = 2;
+
+ /*
+ * Type of GPIO access available to consumers on the mesh
+ */
+ RemoteHardwarePinType type = 3;
+}
+
+enum RemoteHardwarePinType {
+ /*
+ * Unset/unused
+ */
+ UNKNOWN = 0;
+
+ /*
+ * GPIO pin can be read (if it is high / low)
+ */
+ DIGITAL_READ = 1;
+
+ /*
+ * GPIO pin can be written to (high / low)
+ */
+ DIGITAL_WRITE = 2;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/mqtt.options b/src/protos/meshtastic/mqtt.options
new file mode 100644
index 0000000..591e898
--- /dev/null
+++ b/src/protos/meshtastic/mqtt.options
@@ -0,0 +1,8 @@
+*ServiceEnvelope.packet type:FT_POINTER
+*ServiceEnvelope.channel_id type:FT_POINTER
+*ServiceEnvelope.gateway_id type:FT_POINTER
+
+*MapReport.long_name max_size:40
+*MapReport.short_name max_size:5
+*MapReport.firmware_version max_size:18
+*MapReport.num_online_local_nodes int_size:16
\ No newline at end of file
diff --git a/src/protos/meshtastic/mqtt.proto b/src/protos/meshtastic/mqtt.proto
new file mode 100644
index 0000000..17ebf0e
--- /dev/null
+++ b/src/protos/meshtastic/mqtt.proto
@@ -0,0 +1,106 @@
+syntax = "proto3";
+
+package meshtastic;
+
+import "meshtastic/mesh.proto";
+import "meshtastic/config.proto";
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "MQTTProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * This message wraps a MeshPacket with extra metadata about the sender and how it arrived.
+ */
+message ServiceEnvelope {
+ /*
+ * The (probably encrypted) packet
+ */
+ MeshPacket packet = 1;
+
+ /*
+ * The global channel ID it was sent on
+ */
+ string channel_id = 2;
+
+ /*
+ * The sending gateway node ID. Can we use this to authenticate/prevent fake
+ * nodeid impersonation for senders? - i.e. use gateway/mesh id (which is authenticated) + local node id as
+ * the globally trusted nodenum
+ */
+ string gateway_id = 3;
+}
+
+/*
+ * Information about a node intended to be reported unencrypted to a map using MQTT.
+ */
+message MapReport {
+ /*
+ * A full name for this user, i.e. "Kevin Hester"
+ */
+ string long_name = 1;
+
+ /*
+ * A VERY short name, ideally two characters.
+ * Suitable for a tiny OLED screen
+ */
+ string short_name = 2;
+
+ /*
+ * Role of the node that applies specific settings for a particular use-case
+ */
+ Config.DeviceConfig.Role role = 3;
+
+ /*
+ * Hardware model of the node, i.e. T-Beam, Heltec V3, etc...
+ */
+ HardwareModel hw_model = 4;
+
+ /*
+ * Device firmware version string
+ */
+ string firmware_version = 5;
+
+ /*
+ * The region code for the radio (US, CN, EU433, etc...)
+ */
+ Config.LoRaConfig.RegionCode region = 6;
+
+ /*
+ * Modem preset used by the radio (LongFast, MediumSlow, etc...)
+ */
+ Config.LoRaConfig.ModemPreset modem_preset = 7;
+
+ /*
+ * Whether the node has a channel with default PSK and name (LongFast, MediumSlow, etc...)
+ * and it uses the default frequency slot given the region and modem preset.
+ */
+ bool has_default_channel = 8;
+
+ /*
+ * Latitude: multiply by 1e-7 to get degrees in floating point
+ */
+ sfixed32 latitude_i = 9;
+
+ /*
+ * Longitude: multiply by 1e-7 to get degrees in floating point
+ */
+ sfixed32 longitude_i = 10;
+
+ /*
+ * Altitude in meters above MSL
+ */
+ int32 altitude = 11;
+
+ /*
+ * Indicates the bits of precision for latitude and longitude set by the sending node
+ */
+ uint32 position_precision = 12;
+
+ /*
+ * Number of online nodes (heard in the last 2 hours) this node has in its list that were received locally (not via MQTT)
+ */
+ uint32 num_online_local_nodes = 13;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/paxcount.proto b/src/protos/meshtastic/paxcount.proto
new file mode 100644
index 0000000..47b2639
--- /dev/null
+++ b/src/protos/meshtastic/paxcount.proto
@@ -0,0 +1,29 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "PaxcountProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * TODO: REPLACE
+ */
+message Paxcount {
+ /*
+ * seen Wifi devices
+ */
+ uint32 wifi = 1;
+
+ /*
+ * Seen BLE devices
+ */
+ uint32 ble = 2;
+
+ /*
+ * Uptime in seconds
+ */
+ uint32 uptime = 3;
+}
diff --git a/src/protos/meshtastic/portnums.proto b/src/protos/meshtastic/portnums.proto
new file mode 100644
index 0000000..b02651a
--- /dev/null
+++ b/src/protos/meshtastic/portnums.proto
@@ -0,0 +1,216 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "Portnums";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * For any new 'apps' that run on the device or via sister apps on phones/PCs they should pick and use a
+ * unique 'portnum' for their application.
+ * If you are making a new app using meshtastic, please send in a pull request to add your 'portnum' to this
+ * master table.
+ * PortNums should be assigned in the following range:
+ * 0-63 Core Meshtastic use, do not use for third party apps
+ * 64-127 Registered 3rd party apps, send in a pull request that adds a new entry to portnums.proto to register your application
+ * 256-511 Use one of these portnums for your private applications that you don't want to register publically
+ * All other values are reserved.
+ * Note: This was formerly a Type enum named 'typ' with the same id #
+ * We have change to this 'portnum' based scheme for specifying app handlers for particular payloads.
+ * This change is backwards compatible by treating the legacy OPAQUE/CLEAR_TEXT values identically.
+ */
+enum PortNum {
+ /*
+ * Deprecated: do not use in new code (formerly called OPAQUE)
+ * A message sent from a device outside of the mesh, in a form the mesh does not understand
+ * NOTE: This must be 0, because it is documented in IMeshService.aidl to be so
+ * ENCODING: binary undefined
+ */
+ UNKNOWN_APP = 0;
+
+ /*
+ * A simple UTF-8 text message, which even the little micros in the mesh
+ * can understand and show on their screen eventually in some circumstances
+ * even signal might send messages in this form (see below)
+ * ENCODING: UTF-8 Plaintext (?)
+ */
+ TEXT_MESSAGE_APP = 1;
+
+ /*
+ * Reserved for built-in GPIO/example app.
+ * See remote_hardware.proto/HardwareMessage for details on the message sent/received to this port number
+ * ENCODING: Protobuf
+ */
+ REMOTE_HARDWARE_APP = 2;
+
+ /*
+ * The built-in position messaging app.
+ * Payload is a Position message.
+ * ENCODING: Protobuf
+ */
+ POSITION_APP = 3;
+
+ /*
+ * The built-in user info app.
+ * Payload is a User message.
+ * ENCODING: Protobuf
+ */
+ NODEINFO_APP = 4;
+
+ /*
+ * Protocol control packets for mesh protocol use.
+ * Payload is a Routing message.
+ * ENCODING: Protobuf
+ */
+ ROUTING_APP = 5;
+
+ /*
+ * Admin control packets.
+ * Payload is a AdminMessage message.
+ * ENCODING: Protobuf
+ */
+ ADMIN_APP = 6;
+
+ /*
+ * Compressed TEXT_MESSAGE payloads.
+ * ENCODING: UTF-8 Plaintext (?) with Unishox2 Compression
+ * NOTE: The Device Firmware converts a TEXT_MESSAGE_APP to TEXT_MESSAGE_COMPRESSED_APP if the compressed
+ * payload is shorter. There's no need for app developers to do this themselves. Also the firmware will decompress
+ * any incoming TEXT_MESSAGE_COMPRESSED_APP payload and convert to TEXT_MESSAGE_APP.
+ */
+ TEXT_MESSAGE_COMPRESSED_APP = 7;
+
+ /*
+ * Waypoint payloads.
+ * Payload is a Waypoint message.
+ * ENCODING: Protobuf
+ */
+ WAYPOINT_APP = 8;
+
+ /*
+ * Audio Payloads.
+ * Encapsulated codec2 packets. On 2.4 GHZ Bandwidths only for now
+ * ENCODING: codec2 audio frames
+ * NOTE: audio frames contain a 3 byte header (0xc0 0xde 0xc2) and a one byte marker for the decompressed bitrate.
+ * This marker comes from the 'moduleConfig.audio.bitrate' enum minus one.
+ */
+ AUDIO_APP = 9;
+
+ /*
+ * Same as Text Message but originating from Detection Sensor Module.
+ * NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9
+ */
+ DETECTION_SENSOR_APP = 10;
+
+ /*
+ * Provides a 'ping' service that replies to any packet it receives.
+ * Also serves as a small example module.
+ * ENCODING: ASCII Plaintext
+ */
+ REPLY_APP = 32;
+
+ /*
+ * Used for the python IP tunnel feature
+ * ENCODING: IP Packet. Handled by the python API, firmware ignores this one and pases on.
+ */
+ IP_TUNNEL_APP = 33;
+
+ /*
+ * Paxcounter lib included in the firmware
+ * ENCODING: protobuf
+ */
+ PAXCOUNTER_APP = 34;
+
+ /*
+ * Provides a hardware serial interface to send and receive from the Meshtastic network.
+ * Connect to the RX/TX pins of a device with 38400 8N1. Packets received from the Meshtastic
+ * network is forwarded to the RX pin while sending a packet to TX will go out to the Mesh network.
+ * Maximum packet size of 240 bytes.
+ * Module is disabled by default can be turned on by setting SERIAL_MODULE_ENABLED = 1 in SerialPlugh.cpp.
+ * ENCODING: binary undefined
+ */
+ SERIAL_APP = 64;
+
+ /*
+ * STORE_FORWARD_APP (Work in Progress)
+ * Maintained by Jm Casler (MC Hamster) : jm@casler.org
+ * ENCODING: Protobuf
+ */
+ STORE_FORWARD_APP = 65;
+
+ /*
+ * Optional port for messages for the range test module.
+ * ENCODING: ASCII Plaintext
+ * NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9
+ */
+ RANGE_TEST_APP = 66;
+
+ /*
+ * Provides a format to send and receive telemetry data from the Meshtastic network.
+ * Maintained by Charles Crossan (crossan007) : crossan007@gmail.com
+ * ENCODING: Protobuf
+ */
+ TELEMETRY_APP = 67;
+
+ /*
+ * Experimental tools for estimating node position without a GPS
+ * Maintained by Github user a-f-G-U-C (a Meshtastic contributor)
+ * Project files at https://github.com/a-f-G-U-C/Meshtastic-ZPS
+ * ENCODING: arrays of int64 fields
+ */
+ ZPS_APP = 68;
+
+ /*
+ * Used to let multiple instances of Linux native applications communicate
+ * as if they did using their LoRa chip.
+ * Maintained by GitHub user GUVWAF.
+ * Project files at https://github.com/GUVWAF/Meshtasticator
+ * ENCODING: Protobuf (?)
+ */
+ SIMULATOR_APP = 69;
+
+ /*
+ * Provides a traceroute functionality to show the route a packet towards
+ * a certain destination would take on the mesh.
+ * ENCODING: Protobuf
+ */
+ TRACEROUTE_APP = 70;
+
+ /*
+ * Aggregates edge info for the network by sending out a list of each node's neighbors
+ * ENCODING: Protobuf
+ */
+ NEIGHBORINFO_APP = 71;
+
+ /*
+ * ATAK Plugin
+ * Portnum for payloads from the official Meshtastic ATAK plugin
+ */
+ ATAK_PLUGIN = 72;
+
+ /*
+ * Provides unencrypted information about a node for consumption by a map via MQTT
+ */
+ MAP_REPORT_APP = 73;
+
+ /*
+ * Private applications should use portnums >= 256.
+ * To simplify initial development and testing you can use "PRIVATE_APP"
+ * in your code without needing to rebuild protobuf files (via [regen-protos.sh](https://github.com/meshtastic/firmware/blob/master/bin/regen-protos.sh))
+ */
+ PRIVATE_APP = 256;
+
+ /*
+ * ATAK Forwarder Module https://github.com/paulmandal/atak-forwarder
+ * ENCODING: libcotshrink
+ */
+ ATAK_FORWARDER = 257;
+
+ /*
+ * Currently we limit port nums to no higher than this value
+ */
+ MAX = 511;
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/remote_hardware.proto b/src/protos/meshtastic/remote_hardware.proto
new file mode 100644
index 0000000..ba4a693
--- /dev/null
+++ b/src/protos/meshtastic/remote_hardware.proto
@@ -0,0 +1,75 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "RemoteHardware";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * An example app to show off the module system. This message is used for
+ * REMOTE_HARDWARE_APP PortNums.
+ * Also provides easy remote access to any GPIO.
+ * In the future other remote hardware operations can be added based on user interest
+ * (i.e. serial output, spi/i2c input/output).
+ * FIXME - currently this feature is turned on by default which is dangerous
+ * because no security yet (beyond the channel mechanism).
+ * It should be off by default and then protected based on some TBD mechanism
+ * (a special channel once multichannel support is included?)
+ */
+message HardwareMessage {
+ /*
+ * TODO: REPLACE
+ */
+ enum Type {
+ /*
+ * Unset/unused
+ */
+ UNSET = 0;
+
+ /*
+ * Set gpio gpios based on gpio_mask/gpio_value
+ */
+ WRITE_GPIOS = 1;
+
+ /*
+ * We are now interested in watching the gpio_mask gpios.
+ * If the selected gpios change, please broadcast GPIOS_CHANGED.
+ * Will implicitly change the gpios requested to be INPUT gpios.
+ */
+ WATCH_GPIOS = 2;
+
+ /*
+ * The gpios listed in gpio_mask have changed, the new values are listed in gpio_value
+ */
+ GPIOS_CHANGED = 3;
+
+ /*
+ * Read the gpios specified in gpio_mask, send back a READ_GPIOS_REPLY reply with gpio_value populated
+ */
+ READ_GPIOS = 4;
+
+ /*
+ * A reply to READ_GPIOS. gpio_mask and gpio_value will be populated
+ */
+ READ_GPIOS_REPLY = 5;
+ }
+
+ /*
+ * What type of HardwareMessage is this?
+ */
+ Type type = 1;
+
+ /*
+ * What gpios are we changing. Not used for all MessageTypes, see MessageType for details
+ */
+ uint64 gpio_mask = 2;
+
+ /*
+ * For gpios that were listed in gpio_mask as valid, what are the signal levels for those gpios.
+ * Not used for all MessageTypes, see MessageType for details
+ */
+ uint64 gpio_value = 3;
+}
diff --git a/src/protos/meshtastic/rtttl.options b/src/protos/meshtastic/rtttl.options
new file mode 100644
index 0000000..1ae0c2f
--- /dev/null
+++ b/src/protos/meshtastic/rtttl.options
@@ -0,0 +1 @@
+*RTTTLConfig.ringtone max_size:230
diff --git a/src/protos/meshtastic/rtttl.proto b/src/protos/meshtastic/rtttl.proto
new file mode 100644
index 0000000..11c8b92
--- /dev/null
+++ b/src/protos/meshtastic/rtttl.proto
@@ -0,0 +1,19 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "RTTTLConfigProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * Canned message module configuration.
+ */
+message RTTTLConfig {
+ /*
+ * Ringtone for PWM Buzzer in RTTTL Format.
+ */
+ string ringtone = 1;
+}
diff --git a/src/protos/meshtastic/storeforward.options b/src/protos/meshtastic/storeforward.options
new file mode 100644
index 0000000..8580aab
--- /dev/null
+++ b/src/protos/meshtastic/storeforward.options
@@ -0,0 +1 @@
+*StoreAndForward.text max_size:237
\ No newline at end of file
diff --git a/src/protos/meshtastic/storeforward.proto b/src/protos/meshtastic/storeforward.proto
new file mode 100644
index 0000000..ef7de2c
--- /dev/null
+++ b/src/protos/meshtastic/storeforward.proto
@@ -0,0 +1,218 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "StoreAndForwardProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * TODO: REPLACE
+ */
+message StoreAndForward {
+ /*
+ * 001 - 063 = From Router
+ * 064 - 127 = From Client
+ */
+ enum RequestResponse {
+ /*
+ * Unset/unused
+ */
+ UNSET = 0;
+
+ /*
+ * Router is an in error state.
+ */
+ ROUTER_ERROR = 1;
+
+ /*
+ * Router heartbeat
+ */
+ ROUTER_HEARTBEAT = 2;
+
+ /*
+ * Router has requested the client respond. This can work as a
+ * "are you there" message.
+ */
+ ROUTER_PING = 3;
+
+ /*
+ * The response to a "Ping"
+ */
+ ROUTER_PONG = 4;
+
+ /*
+ * Router is currently busy. Please try again later.
+ */
+ ROUTER_BUSY = 5;
+
+ /*
+ * Router is responding to a request for history.
+ */
+ ROUTER_HISTORY = 6;
+
+ /*
+ * Router is responding to a request for stats.
+ */
+ ROUTER_STATS = 7;
+
+ /*
+ * Router sends a text message from its history that was a direct message.
+ */
+ ROUTER_TEXT_DIRECT = 8;
+
+ /*
+ * Router sends a text message from its history that was a broadcast.
+ */
+ ROUTER_TEXT_BROADCAST = 9;
+
+ /*
+ * Client is an in error state.
+ */
+ CLIENT_ERROR = 64;
+
+ /*
+ * Client has requested a replay from the router.
+ */
+ CLIENT_HISTORY = 65;
+
+ /*
+ * Client has requested stats from the router.
+ */
+ CLIENT_STATS = 66;
+
+ /*
+ * Client has requested the router respond. This can work as a
+ * "are you there" message.
+ */
+ CLIENT_PING = 67;
+
+ /*
+ * The response to a "Ping"
+ */
+ CLIENT_PONG = 68;
+
+ /*
+ * Client has requested that the router abort processing the client's request
+ */
+ CLIENT_ABORT = 106;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ message Statistics {
+ /*
+ * Number of messages we have ever seen
+ */
+ uint32 messages_total = 1;
+
+ /*
+ * Number of messages we have currently saved our history.
+ */
+ uint32 messages_saved = 2;
+
+ /*
+ * Maximum number of messages we will save
+ */
+ uint32 messages_max = 3;
+
+ /*
+ * Router uptime in seconds
+ */
+ uint32 up_time = 4;
+
+ /*
+ * Number of times any client sent a request to the S&F.
+ */
+ uint32 requests = 5;
+
+ /*
+ * Number of times the history was requested.
+ */
+ uint32 requests_history = 6;
+
+ /*
+ * Is the heartbeat enabled on the server?
+ */
+ bool heartbeat = 7;
+
+ /*
+ * Maximum number of messages the server will return.
+ */
+ uint32 return_max = 8;
+
+ /*
+ * Maximum history window in minutes the server will return messages from.
+ */
+ uint32 return_window = 9;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ message History {
+ /*
+ * Number of that will be sent to the client
+ */
+ uint32 history_messages = 1;
+
+ /*
+ * The window of messages that was used to filter the history client requested
+ */
+ uint32 window = 2;
+
+ /*
+ * Index in the packet history of the last message sent in a previous request to the server.
+ * Will be sent to the client before sending the history and can be set in a subsequent request to avoid getting packets the server already sent to the client.
+ */
+ uint32 last_request = 3;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ message Heartbeat {
+ /*
+ * Period in seconds that the heartbeat is sent out that will be sent to the client
+ */
+ uint32 period = 1;
+
+ /*
+ * If set, this is not the primary Store & Forward router on the mesh
+ */
+ uint32 secondary = 2;
+ }
+
+ /*
+ * TODO: REPLACE
+ */
+ RequestResponse rr = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ oneof variant {
+ /*
+ * TODO: REPLACE
+ */
+ Statistics stats = 2;
+
+ /*
+ * TODO: REPLACE
+ */
+ History history = 3;
+
+ /*
+ * TODO: REPLACE
+ */
+ Heartbeat heartbeat = 4;
+
+ /*
+ * Text from history message.
+ */
+ bytes text = 5;
+ }
+}
\ No newline at end of file
diff --git a/src/protos/meshtastic/telemetry.options b/src/protos/meshtastic/telemetry.options
new file mode 100644
index 0000000..6c80df9
--- /dev/null
+++ b/src/protos/meshtastic/telemetry.options
@@ -0,0 +1,4 @@
+# options for nanopb
+# https://jpa.kapsi.fi/nanopb/docs/reference.html#proto-file-options
+
+
diff --git a/src/protos/meshtastic/telemetry.proto b/src/protos/meshtastic/telemetry.proto
new file mode 100644
index 0000000..22b234a
--- /dev/null
+++ b/src/protos/meshtastic/telemetry.proto
@@ -0,0 +1,287 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "TelemetryProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+/*
+ * Key native device metrics such as battery level
+ */
+message DeviceMetrics {
+ /*
+ * 0-100 (>100 means powered)
+ */
+ uint32 battery_level = 1;
+
+ /*
+ * Voltage measured
+ */
+ float voltage = 2;
+
+ /*
+ * Utilization for the current channel, including well formed TX, RX and malformed RX (aka noise).
+ */
+ float channel_utilization = 3;
+
+ /*
+ * Percent of airtime for transmission used within the last hour.
+ */
+ float air_util_tx = 4;
+}
+
+/*
+ * Weather station or other environmental metrics
+ */
+message EnvironmentMetrics {
+ /*
+ * Temperature measured
+ */
+ float temperature = 1;
+
+ /*
+ * Relative humidity percent measured
+ */
+ float relative_humidity = 2;
+
+ /*
+ * Barometric pressure in hPA measured
+ */
+ float barometric_pressure = 3;
+
+ /*
+ * Gas resistance in MOhm measured
+ */
+ float gas_resistance = 4;
+
+ /*
+ * Voltage measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x)
+ */
+ float voltage = 5;
+
+ /*
+ * Current measured (To be depreciated in favor of PowerMetrics in Meshtastic 3.x)
+ */
+ float current = 6;
+}
+
+/*
+ * Power Metrics (voltage / current / etc)
+ */
+message PowerMetrics {
+ /*
+ * Voltage (Ch1)
+ */
+ float ch1_voltage = 1;
+
+ /*
+ * Current (Ch1)
+ */
+ float ch1_current = 2;
+
+ /*
+ * Voltage (Ch2)
+ */
+ float ch2_voltage = 3;
+
+ /*
+ * Current (Ch2)
+ */
+ float ch2_current = 4;
+
+ /*
+ * Voltage (Ch3)
+ */
+ float ch3_voltage = 5;
+
+ /*
+ * Current (Ch3)
+ */
+ float ch3_current = 6;
+}
+
+/*
+ * Air quality metrics
+ */
+message AirQualityMetrics {
+ /*
+ * Concentration Units Standard PM1.0
+ */
+ uint32 pm10_standard = 1;
+
+ /*
+ * Concentration Units Standard PM2.5
+ */
+ uint32 pm25_standard = 2;
+
+ /*
+ * Concentration Units Standard PM10.0
+ */
+ uint32 pm100_standard = 3;
+
+ /*
+ * Concentration Units Environmental PM1.0
+ */
+ uint32 pm10_environmental = 4;
+
+ /*
+ * Concentration Units Environmental PM2.5
+ */
+ uint32 pm25_environmental = 5;
+
+ /*
+ * Concentration Units Environmental PM10.0
+ */
+ uint32 pm100_environmental = 6;
+
+ /*
+ * 0.3um Particle Count
+ */
+ uint32 particles_03um = 7;
+
+ /*
+ * 0.5um Particle Count
+ */
+ uint32 particles_05um = 8;
+
+ /*
+ * 1.0um Particle Count
+ */
+ uint32 particles_10um = 9;
+
+ /*
+ * 2.5um Particle Count
+ */
+ uint32 particles_25um = 10;
+
+ /*
+ * 5.0um Particle Count
+ */
+ uint32 particles_50um = 11;
+
+ /*
+ * 10.0um Particle Count
+ */
+ uint32 particles_100um = 12;
+}
+
+/*
+ * Types of Measurements the telemetry module is equipped to handle
+ */
+message Telemetry {
+ /*
+ * Seconds since 1970 - or 0 for unknown/unset
+ */
+ fixed32 time = 1;
+
+ oneof variant {
+ /*
+ * Key native device metrics such as battery level
+ */
+ DeviceMetrics device_metrics = 2;
+
+ /*
+ * Weather station or other environmental metrics
+ */
+ EnvironmentMetrics environment_metrics = 3;
+
+ /*
+ * Air quality metrics
+ */
+ AirQualityMetrics air_quality_metrics = 4;
+
+ /*
+ * Power Metrics
+ */
+ PowerMetrics power_metrics = 5;
+ }
+}
+
+/*
+ * Supported I2C Sensors for telemetry in Meshtastic
+ */
+enum TelemetrySensorType {
+ /*
+ * No external telemetry sensor explicitly set
+ */
+ SENSOR_UNSET = 0;
+
+ /*
+ * High accuracy temperature, pressure, humidity
+ */
+ BME280 = 1;
+
+ /*
+ * High accuracy temperature, pressure, humidity, and air resistance
+ */
+ BME680 = 2;
+
+ /*
+ * Very high accuracy temperature
+ */
+ MCP9808 = 3;
+
+ /*
+ * Moderate accuracy current and voltage
+ */
+ INA260 = 4;
+
+ /*
+ * Moderate accuracy current and voltage
+ */
+ INA219 = 5;
+
+ /*
+ * High accuracy temperature and pressure
+ */
+ BMP280 = 6;
+
+ /*
+ * High accuracy temperature and humidity
+ */
+ SHTC3 = 7;
+
+ /*
+ * High accuracy pressure
+ */
+ LPS22 = 8;
+
+ /*
+ * 3-Axis magnetic sensor
+ */
+ QMC6310 = 9;
+
+ /*
+ * 6-Axis inertial measurement sensor
+ */
+ QMI8658 = 10;
+
+ /*
+ * 3-Axis magnetic sensor
+ */
+ QMC5883L = 11;
+
+ /*
+ * High accuracy temperature and humidity
+ */
+ SHT31 = 12;
+
+ /*
+ * PM2.5 air quality sensor
+ */
+ PMSA003I = 13;
+
+ /*
+ * INA3221 3 Channel Voltage / Current Sensor
+ */
+ INA3221 = 14;
+
+ /*
+ * BMP085/BMP180 High accuracy temperature and pressure (older Version of BMP280)
+ */
+ BMP085 = 15;
+
+}
diff --git a/src/protos/meshtastic/xmodem.options b/src/protos/meshtastic/xmodem.options
new file mode 100644
index 0000000..3af6125
--- /dev/null
+++ b/src/protos/meshtastic/xmodem.options
@@ -0,0 +1,6 @@
+# options for nanopb
+# https://jpa.kapsi.fi/nanopb/docs/reference.html#proto-file-options
+
+*XModem.buffer max_size:128
+*XModem.seq int_size:16
+*XModem.crc16 int_size:16
diff --git a/src/protos/meshtastic/xmodem.proto b/src/protos/meshtastic/xmodem.proto
new file mode 100644
index 0000000..732780a
--- /dev/null
+++ b/src/protos/meshtastic/xmodem.proto
@@ -0,0 +1,27 @@
+syntax = "proto3";
+
+package meshtastic;
+
+option csharp_namespace = "Meshtastic.Protobufs";
+option go_package = "github.com/meshtastic/go/generated";
+option java_outer_classname = "XmodemProtos";
+option java_package = "com.geeksville.mesh";
+option swift_prefix = "";
+
+message XModem {
+ enum Control {
+ NUL = 0;
+ SOH = 1;
+ STX = 2;
+ EOT = 4;
+ ACK = 6;
+ NAK = 21;
+ CAN = 24;
+ CTRLZ = 26;
+ }
+
+ Control control = 1;
+ uint32 seq = 2;
+ uint32 crc16 = 3;
+ bytes buffer = 4;
+}
diff --git a/src/public/index.html b/src/public/index.html
index 68de9aa..3f75bfd 100644
--- a/src/public/index.html
+++ b/src/public/index.html
@@ -13,9 +13,6 @@
-
-
-
@@ -313,18 +310,6 @@
return false;
}
- if(lat == 0 && lng == 0){
- return false;
- }
-
- if(lat < -90 || lat > 90){
- return false;
- }
-
- if(lng < -180 || lng > 180){
- return false;
- }
-
return true;
}
@@ -488,6 +473,11 @@
// add nodes
for(var node of updatedNodes){
+ // skip nodes without position
+ if(!node.latitude || !node.longitude){
+ continue;
+ }
+
// fix lat long
node.latitude = node.latitude / 10000000;
node.longitude = node.longitude / 10000000;
@@ -504,11 +494,11 @@
var icon = iconOnline; // todo status
- var tooltip = `${node.longName}` +
- `
ID: ${node.id}` +
- `
Role: ${node.role}` +
- `
Short Name: ${node.shortName}` +
- `
Hardware: ${node.hwModel}`;
+ var tooltip = `${node.long_name}` +
+ `
ID: ${node.node_id_hex}` +
+ `
Role: ${node.role_name}` +
+ `
Short Name: ${node.short_name}` +
+ `
Hardware: ${node.hardware_model_name}`;
// create node marker
var marker = L.marker([node.latitude, node.longitude], {
@@ -554,7 +544,7 @@
// update nodes
var json = await response.json();
- onNodesUpdated(Object.values(json.nodes));
+ onNodesUpdated(json.nodes);
// hide loading
setLoading(false);