update mesh.proto to add new hardware models

src/protos/meshtastic/mesh.proto

@@ -319,6 +319,26 @@ enum HardwareModel {
    */
   LORA_TYPE = 19;
 
+  /*
+   * wiphone https://www.wiphone.io/
+   */
+  WIPHONE = 20;
+
+  /*
+   * WIO Tracker WM1110 family from Seeed Studio. Includes wio-1110-tracker and wio-1110-sdk
+   */
+  WIO_WM1110 = 21;
+
+  /*
+   * RAK2560 Solar base station based on RAK4630
+   */
+  RAK2560 = 22;
+
+  /*
+   * Heltec HRU-3601: https://heltec.org/project/hru-3601/
+   */
+  HELTEC_HRU_3601 = 23;
+
   /*
    * B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station
    */
@@ -340,8 +360,8 @@ enum HardwareModel {
   SENSELORA_S3 = 28;
 
   /*
-    * Canary Radio Company - CanaryOne: https://canaryradio.io/products/canaryone
+   * Canary Radio Company - CanaryOne: https://canaryradio.io/products/canaryone
-    */
+   */
   CANARYONE = 29;
 
   /*
@@ -456,13 +476,13 @@ enum HardwareModel {
    * LilyGo T-Watch S3 with ESP32-S3 CPU and IPS display
    */
   T_WATCH_S3 = 51;
-  
+
   /*
    * Bobricius Picomputer with ESP32-S3 CPU, Keyboard and IPS display
    */
   PICOMPUTER_S3 = 52;
-  
+
-   /*
+  /*
    * Heltec HT-CT62 with ESP32-C3 CPU and SX1262 LoRa
    */
   HELTEC_HT62 = 53;
@@ -481,7 +501,7 @@ enum HardwareModel {
    * CircuitMess Chatter 2 LLCC68 Lora Module and ESP32 Wroom
    * Lora module can be swapped out for a Heltec RA-62 which is "almost" pin compatible
    * with one cut and one jumper Meshtastic works
-  */
+   */
   CHATTER_2 = 56;
 
   /*
@@ -498,7 +518,67 @@ enum HardwareModel {
    * Older "V1.0" Variant
    */
   HELTEC_WIRELESS_TRACKER_V1_0 = 58;
-  
+
+  /*
+   * unPhone with ESP32-S3, TFT touchscreen,  LSM6DS3TR-C accelerometer and gyroscope
+   */
+  UNPHONE = 59;
+
+  /*
+   * Teledatics TD-LORAC NRF52840 based M.2 LoRA module
+   * Compatible with the TD-WRLS development board
+   */
+  TD_LORAC = 60;
+
+  /*
+   * CDEBYTE EoRa-S3 board using their own MM modules, clone of LILYGO T3S3
+   */
+  CDEBYTE_EORA_S3 = 61;
+
+  /*
+   * TWC_MESH_V4
+   * Adafruit NRF52840 feather express with SX1262, SSD1306 OLED and NEO6M GPS
+   */
+  TWC_MESH_V4 = 62;
+
+  /*
+   * NRF52_PROMICRO_DIY
+   * Promicro NRF52840 with SX1262/LLCC68, SSD1306 OLED and NEO6M GPS
+   */
+  NRF52_PROMICRO_DIY = 63;
+
+  /*
+   * RadioMaster 900 Bandit Nano, https://www.radiomasterrc.com/products/bandit-nano-expresslrs-rf-module
+   * ESP32-D0WDQ6 With SX1276/SKY66122, SSD1306 OLED and No GPS
+   */
+  RADIOMASTER_900_BANDIT_NANO = 64;
+
+  /*
+   * Heltec Capsule Sensor V3 with ESP32-S3 CPU, Portable LoRa device that can replace GNSS modules or sensors
+   */
+  HELTEC_CAPSULE_SENSOR_V3 = 65;
+
+  /*
+  * Heltec Vision Master T190 with ESP32-S3 CPU, and a 1.90 inch TFT display
+  */
+  HELTEC_VISION_MASTER_T190 = 66;
+
+  /*
+  * Heltec Vision Master E213 with ESP32-S3 CPU, and a 2.13 inch E-Ink display
+  */
+  HELTEC_VISION_MASTER_E213 = 67;
+
+  /*
+  * Heltec Vision Master E290 with ESP32-S3 CPU, and a 2.9 inch E-Ink display
+  */
+  HELTEC_VISION_MASTER_E290 = 68;
+
+  /*
+  * Heltec Mesh Node T114 board with nRF52840 CPU, and a 1.14 inch TFT display, Ultimate low-power design,
+  * specifically adapted for the Meshtatic project
+  */
+  HELTEC_MESH_NODE_T114 = 69;
+
   /*
    * ------------------------------------------------------------------------------------------------------------------------------------------
    * Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
@@ -784,7 +864,7 @@ message Waypoint {
 /*
  * This message will be proxied over the PhoneAPI for the client to deliver to the MQTT server
  */
- message MqttClientProxyMessage {
+message MqttClientProxyMessage {
   /*
    * The MQTT topic this message will be sent /received on
    */
@@ -1010,10 +1090,10 @@ message MeshPacket {
    */
   bool via_mqtt = 14;
 
-  /* 
+  /*
-   * Hop limit with which the original packet started. Sent via LoRa using three bits in the unencrypted header. 
+   * Hop limit with which the original packet started. Sent via LoRa using three bits in the unencrypted header.
    * When receiving a packet, the difference between hop_start and hop_limit gives how many hops it traveled.
-   */ 
+   */
   uint32 hop_start = 15;
 }
 
@@ -1126,6 +1206,12 @@ message NodeInfo {
    * Number of hops away from us this node is (0 if adjacent)
    */
   uint32 hops_away = 9;
+
+  /*
+   * True if node is in our favorites list
+   * Persists between NodeDB internal clean ups
+   */
+  bool is_favorite = 10;
 }
 
 /*
@@ -1394,9 +1480,29 @@ message FromRadio {
      * MQTT Client Proxy Message (device sending to client / phone for publishing to MQTT)
      */
     MqttClientProxyMessage mqttClientProxyMessage = 14;
+
+    /*
+     * File system manifest messages
+     */
+    FileInfo fileInfo = 15;
   }
 }
 
+/*
+ * Individual File info for the device
+ */
+message FileInfo {
+  /*
+   * The fully qualified path of the file
+   */
+  string file_name = 1;
+
+  /*
+   * The size of the file in bytes
+   */
+  uint32 size_bytes = 2;
+}
+
 /*
  * Packets/commands to the radio will be written (reliably) to the toRadio characteristic.
  * Once the write completes the phone can assume it is handled.
@@ -1440,6 +1546,11 @@ message ToRadio {
      * MQTT Client Proxy Message (for client / phone subscribed to MQTT sending to device)
      */
     MqttClientProxyMessage mqttClientProxyMessage = 6;
+
+    /*
+     * Heartbeat message (used to keep the device connection awake on serial)
+     */
+    Heartbeat heartbeat = 7;
   }
 }
 
@@ -1496,9 +1607,9 @@ message Neighbor {
   float snr = 2;
 
   /*
-  * Reception time (in secs since 1970) of last message that was last sent by this ID.
+   * Reception time (in secs since 1970) of last message that was last sent by this ID.
-  * Note: this is for local storage only and will not be sent out over the mesh.
+   * Note: this is for local storage only and will not be sent out over the mesh.
-  */
+   */
   fixed32 last_rx_time = 3;
 
   /*
@@ -1561,4 +1672,80 @@ message DeviceMetadata {
    * Has Remote Hardware enabled
    */
   bool hasRemoteHardware = 10;
+}
+
+/*
+ * A heartbeat message is sent to the node from the client to keep the connection alive.
+ * This is currently only needed to keep serial connections alive, but can be used by any PhoneAPI.
+ */
+message Heartbeat {}
+
+/*
+ * RemoteHardwarePins associated with a node
+ */
+message NodeRemoteHardwarePin {
+  /*
+   * The node_num exposing the available gpio pin
+   */
+  uint32 node_num = 1;
+
+  /*
+   * The the available gpio pin for usage with RemoteHardware module
+   */
+  RemoteHardwarePin pin = 2;
+}
+
+message ChunkedPayload {
+  /*
+   * The ID of the entire payload
+   */
+  uint32 payload_id = 1;
+
+  /*
+   * The total number of chunks in the payload
+   */
+  uint32 chunk_count = 2;
+
+  /*
+   * The current chunk index in the total
+   */
+  uint32 chunk_index = 3;
+
+  /*
+   * The binary data of the current chunk
+   */
+  bytes payload_chunk = 4;
+}
+
+/*
+ * Wrapper message for broken repeated oneof support
+ */
+message resend_chunks {
+  repeated uint32 chunks = 1;
+}
+
+/*
+ * Responses to a ChunkedPayload request
+ */
+message ChunkedPayloadResponse {
+  /*
+   * The ID of the entire payload
+   */
+  uint32 payload_id = 1;
+
+  oneof payload_variant {
+    /*
+     * Request to transfer chunked payload
+     */
+    bool request_transfer = 2;
+
+    /*
+     * Accept the transfer chunked payload
+     */
+    bool accept_transfer = 3;
+    /*
+     * Request missing indexes in the chunked payload
+     */
+    resend_chunks resend_chunks = 4;
+  }
 }